From 8c4e09dff83847ac7f07bf1da7751e9328006c4d Mon Sep 17 00:00:00 2001 From: Jack Jamison Date: Thu, 30 Jul 2026 20:09:00 -0400 Subject: actual final changes and get rid of junk in lisp dir actually works fine --- .config/emacs/lisp/magit/docs/RelNotes/0.5.1.txt | 11 - .config/emacs/lisp/magit/docs/RelNotes/0.6.1.txt | 24 - .config/emacs/lisp/magit/docs/RelNotes/0.7.0.txt | 70 --- .config/emacs/lisp/magit/docs/RelNotes/0.8.0.txt | 55 -- .config/emacs/lisp/magit/docs/RelNotes/0.8.1.txt | 28 - .config/emacs/lisp/magit/docs/RelNotes/0.8.2.txt | 27 - .config/emacs/lisp/magit/docs/RelNotes/1.0.0.txt | 84 --- .config/emacs/lisp/magit/docs/RelNotes/1.1.0.txt | 112 ---- .config/emacs/lisp/magit/docs/RelNotes/1.1.1.txt | 25 - .config/emacs/lisp/magit/docs/RelNotes/1.1.2.txt | 33 -- .config/emacs/lisp/magit/docs/RelNotes/1.2.0.txt | 73 --- .config/emacs/lisp/magit/docs/RelNotes/1.2.1.txt | 15 - .config/emacs/lisp/magit/docs/RelNotes/1.2.2.txt | 17 - .config/emacs/lisp/magit/docs/RelNotes/1.4.0.txt | 231 -------- .config/emacs/lisp/magit/docs/RelNotes/1.4.1.txt | 31 - .config/emacs/lisp/magit/docs/RelNotes/1.4.2.txt | 23 - .config/emacs/lisp/magit/docs/RelNotes/2.1.0.txt | 433 -------------- .config/emacs/lisp/magit/docs/RelNotes/2.10.0.txt | 85 --- .config/emacs/lisp/magit/docs/RelNotes/2.10.1.txt | 57 -- .config/emacs/lisp/magit/docs/RelNotes/2.10.2.txt | 47 -- .config/emacs/lisp/magit/docs/RelNotes/2.10.3.txt | 41 -- .config/emacs/lisp/magit/docs/RelNotes/2.11.0.txt | 210 ------- .config/emacs/lisp/magit/docs/RelNotes/2.12.0.txt | 645 -------------------- .config/emacs/lisp/magit/docs/RelNotes/2.12.1.txt | 16 - .config/emacs/lisp/magit/docs/RelNotes/2.13.0.txt | 122 ---- .config/emacs/lisp/magit/docs/RelNotes/2.13.1.txt | 34 -- .config/emacs/lisp/magit/docs/RelNotes/2.2.0.txt | 219 ------- .config/emacs/lisp/magit/docs/RelNotes/2.2.1.txt | 45 -- .config/emacs/lisp/magit/docs/RelNotes/2.2.2.txt | 45 -- .config/emacs/lisp/magit/docs/RelNotes/2.3.0.txt | 251 -------- .config/emacs/lisp/magit/docs/RelNotes/2.3.1.txt | 31 - .config/emacs/lisp/magit/docs/RelNotes/2.4.0.txt | 147 ----- .config/emacs/lisp/magit/docs/RelNotes/2.4.1.txt | 31 - .config/emacs/lisp/magit/docs/RelNotes/2.5.0.txt | 122 ---- .config/emacs/lisp/magit/docs/RelNotes/2.6.0.txt | 134 ----- .config/emacs/lisp/magit/docs/RelNotes/2.6.1.txt | 40 -- .config/emacs/lisp/magit/docs/RelNotes/2.6.2.txt | 52 -- .config/emacs/lisp/magit/docs/RelNotes/2.7.0.txt | 81 --- .config/emacs/lisp/magit/docs/RelNotes/2.8.0.txt | 128 ---- .config/emacs/lisp/magit/docs/RelNotes/2.9.0.txt | 437 -------------- .config/emacs/lisp/magit/docs/RelNotes/2.90.0.org | 423 ------------- .config/emacs/lisp/magit/docs/RelNotes/2.90.1.org | 39 -- .config/emacs/lisp/magit/docs/RelNotes/3.0.0.org | 686 ---------------------- .config/emacs/lisp/magit/docs/RelNotes/3.1.0.org | 58 -- .config/emacs/lisp/magit/docs/RelNotes/3.2.0.org | 85 --- .config/emacs/lisp/magit/docs/RelNotes/3.2.1.org | 12 - .config/emacs/lisp/magit/docs/RelNotes/3.3.0.org | 137 ----- .config/emacs/lisp/magit/docs/RelNotes/4.0.0.org | 532 ----------------- 48 files changed, 6284 deletions(-) delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/0.5.1.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/0.6.1.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/0.7.0.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/0.8.0.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/0.8.1.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/0.8.2.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/1.0.0.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/1.1.0.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/1.1.1.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/1.1.2.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/1.2.0.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/1.2.1.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/1.2.2.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/1.4.0.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/1.4.1.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/1.4.2.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/2.1.0.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/2.10.0.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/2.10.1.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/2.10.2.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/2.10.3.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/2.11.0.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/2.12.0.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/2.12.1.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/2.13.0.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/2.13.1.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/2.2.0.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/2.2.1.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/2.2.2.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/2.3.0.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/2.3.1.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/2.4.0.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/2.4.1.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/2.5.0.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/2.6.0.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/2.6.1.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/2.6.2.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/2.7.0.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/2.8.0.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/2.9.0.txt delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/2.90.0.org delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/2.90.1.org delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/3.0.0.org delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/3.1.0.org delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/3.2.0.org delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/3.2.1.org delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/3.3.0.org delete mode 100644 .config/emacs/lisp/magit/docs/RelNotes/4.0.0.org (limited to '.config/emacs/lisp/magit/docs/RelNotes') diff --git a/.config/emacs/lisp/magit/docs/RelNotes/0.5.1.txt b/.config/emacs/lisp/magit/docs/RelNotes/0.5.1.txt deleted file mode 100644 index d08cdb0..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/0.5.1.txt +++ /dev/null @@ -1,11 +0,0 @@ -Magit v0.5.1 Release Notes -========================== - -This is the first release of Magit. Enjoy! - -Released 14 August 2008 by Marius Vollmer. - -Authors -------- - - 157 Marius Vollmer diff --git a/.config/emacs/lisp/magit/docs/RelNotes/0.6.1.txt b/.config/emacs/lisp/magit/docs/RelNotes/0.6.1.txt deleted file mode 100644 index a58c3ba..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/0.6.1.txt +++ /dev/null @@ -1,24 +0,0 @@ -Magit v0.6.1 Release Notes -========================== - -Released 16 October 2008 by Marius Vollmer. - -Changes since v0.5.1 --------------------- - -Almost everything has changed. Some highlights: - - * Magit now works with Git 1.6.0. (John Wiegley) - - * Support for interactive rewriting. - - * Sections can be shown and hidden. - - * Staging, unstaging, applying, reverting and discarding changes can - now be done line-by-line, not only hunk-by-hunk. - -Authors -------- - - 212 Marius Vollmer - - John Wiegley diff --git a/.config/emacs/lisp/magit/docs/RelNotes/0.7.0.txt b/.config/emacs/lisp/magit/docs/RelNotes/0.7.0.txt deleted file mode 100644 index d035539..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/0.7.0.txt +++ /dev/null @@ -1,70 +0,0 @@ -Magit v0.7.0 Release Notes -========================== - -Released 8 March 2009 by Marius Vollmer. - -Changes since v0.6.1 --------------------- - - * Tagging, on 't' and 'T'. - - * Stashing, on 'z' and 'Z'. - - * Wazzup, on 'w'. Wazzup gives you an overview over how other - branches relate to the current one. - - * There is more control over pushing. 'P' now takes a prefix argument - and pushing a branch without a default remote will ask for one. - - * Logs have changed a bit: 'l' shows the traditional brief log, and - 'L' shows a more verbose log. Use the prefix arg to specify the - range of the log. - - * M-x magit-status doesn't prompt anymore for a directory when invoked - from within a Git repository. Use C-u to force a prompt. - - * When you have nothing staged, 'c' will now explicitly ask whether to - commit everything instead of just going ahead and do it. This can - be customized. - - * The digit keys '1', '2', '3', and '4' now show sections on the - respective level and hide everything below. With Meta, they work on - all sections; without, they work only on sections that are a parent - or child of the current section. - - * Typing '+' and '-' will change the size of hunks, via the "-U" - option to git diff. '0' resets hunks to their default size. - - * Typing 'k' on the "Untracked files" section title will offer to - delete all untracked files. - - * Magit understands a bit of git-svn: the status buffer shows unpushed - and unpulled commits, 'N r' runs git svn rebase, and 'N c' runs git - svn dcommit. - - * Magit now also works when the directory is accessed via tramp. - - * M-x magit-status can also create new repositories when given a - directory that is not a Git repository. - - * Magit works better with oldish Gits that don't understand "--graph", - for example. - - * The name of the Git program and common options for it can be - customized. - -Authors -------- - - 107 Marius Vollmer - 18 John Wiegley - 9 Alexey Voinov - 5 Marcin Bachry - 3 Rémi Vanicat - 2 Alex Ott - 2 René Stadler - 2 Steve Purcell - 1 Daniel Farina - 1 David Wallin - 1 Ian Eure - 1 Jesse Alama diff --git a/.config/emacs/lisp/magit/docs/RelNotes/0.8.0.txt b/.config/emacs/lisp/magit/docs/RelNotes/0.8.0.txt deleted file mode 100644 index 3ce415f..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/0.8.0.txt +++ /dev/null @@ -1,55 +0,0 @@ -Magit v0.8.0 Release Notes -========================== - -Released 7 May 2010 by Phil Jackson. - -Changes since v0.7.0 --------------------- - - * By setting magit-repo-dirs, you can get better repo completion. - Magit will offer all subdirectories (up to magit-repo-dirs level - deep) of the listed directories when magit-status asks for a - directory to work on. You can get the old behavior with a double - prefix to magit-status. - - * Hitting 'c' or 'C' while resolving a conflict in the middle of a - rebase will offer to continue the rebase instead of trying to commit - your changes. - - * Pulling will ask which branch to pull from when you don't have a - default branch configured. - - * Switching to a remote branch will offer to create a local tracking - branch for it. - - * Hitting C-c C-s while editing a commit message will toggle the - "--signoff" option. - - * Hitting 's' on the "Untracked files" section title will stage all - untracked files. - - * Hitting 'C-u S' will stage all untracked and tracked files. - - * Performance improvements in the status buffer. - - * Bug fixes to make Magit work better with newer Gits. - -Authors -------- - - 66 Phil Jackson - 53 Marius Vollmer - 27 Rémi Vanicat - 7 Alexey Voinov - 5 Hannu Koivisto - 5 Roger Crew - 4 John Wiegley - 4 Moritz Bunkus - 3 Ben Walton - 2 Marcin Bachry - 2 Óscar Fuentes - 1 David Abrahams - 1 Leo Liu - 1 Pavel Holejsovsky - 1 Ramkumar Ramachandra - 1 Steve Purcell diff --git a/.config/emacs/lisp/magit/docs/RelNotes/0.8.1.txt b/.config/emacs/lisp/magit/docs/RelNotes/0.8.1.txt deleted file mode 100644 index 95b204f..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/0.8.1.txt +++ /dev/null @@ -1,28 +0,0 @@ -Magit v0.8.1 Release Notes -========================== - -Released 10 June 2010 by Phil Jackson. - -Changes since v0.8.0 --------------------- - - * New library `rebase-mode.el'. Edit Git rebase files. - - * New commands `magit-log-all' and `magit-log-first-parent'. - - * New command `magit-git-command'. Run any Git command. - - * `magit-remote-update' learned to fetch just the current remote. - - * `magit-tag' learned to place the tag on something other than HEAD. - -Authors -------- - - 55 Phil Jackson - 7 Rémi Vanicat - 7 Ævar Arnfjörð Bjarmason - 4 Natalie Weizenbaum - 2 Ramkumar Ramachandra - 1 Mark Hepburn - 1 Moritz Bunkus diff --git a/.config/emacs/lisp/magit/docs/RelNotes/0.8.2.txt b/.config/emacs/lisp/magit/docs/RelNotes/0.8.2.txt deleted file mode 100644 index 9367486..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/0.8.2.txt +++ /dev/null @@ -1,27 +0,0 @@ -Magit v0.8.2 Release Notes -========================== - -Released 10 July 2010 by Phil Jackson. - -Changes since v0.8.1 --------------------- - - * Use shorter more human readable representations for refs. - - * Optionally show refs for remote branches the way Git would. - - * Tell VC to update the mode-line for us. - -Authors -------- - - 21 Phil Jackson - 18 Natalie Weizenbaum - 2 Alan Falloon - 2 Moritz Bunkus - 2 Rémi Vanicat - 1 Alex Ott - 1 Leo Liu - 1 Sean Bryant - 1 Ævar Arnfjörð Bjarmason - 1 Óscar Fuentes diff --git a/.config/emacs/lisp/magit/docs/RelNotes/1.0.0.txt b/.config/emacs/lisp/magit/docs/RelNotes/1.0.0.txt deleted file mode 100644 index 92f9175..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/1.0.0.txt +++ /dev/null @@ -1,84 +0,0 @@ -Magit v1.0.0 Release Notes -========================== - -Released 23 March 2011 by Phil Jackson. - -Changes since v0.8.2 --------------------- - - * New library `magit-key-mode.el'. From a popup buffer dispatch - Magit/Emacs commands which wrap Git commands and select the - arguments passed to Git. Group various sets of related commands - in new menus and adjust them accordingly. - - * New library `magit-svn.el' based on code previously in `magit.el'. - Improve the implementation. Control `git svn' from Magit. - - * New library `magit-topgit.el' based on code previously in - `magit.el'. Improve the implementation. Control TopGit from Magit. - - * Provide a wrapper for `completing-read'. Support using iswitchb to - do completion. - - * Fixed and improved information shown during a rebase. - - * New macro `magit-define-inserter' to define functions which insert - sections. - - * New macro `magit-add-action'. A hook-like extension mechanism for - commands that behave differently based on the type of the section - at point. - - * New macro `magit-define-command'. Like `defun' but also define - a hook in addition to the function/command. If a hook function - succeeds do not run the function body as passed to this macro. - - * New commands `magit-add-change-log-entry' - and `magit-add-change-log-entry-other-window'. - - * New command `magit-change-what-branch-tracks'. - - * New commands `magit-run-git-gui' and `magit-run-gitk'. - - * Various new submodule commands. - - * Various new branch commands. - - * Various new log commands. Remove some old log commands. - - * Make reflog commands more like the log commands. - - * Numerous bugfixes and tweaks. - -Authors -------- - - 197 Phil Jackson - 27 Natalie Weizenbaum - 25 Óscar Fuentes - 22 Moritz Bunkus - 20 Rémi Vanicat - 17 Aaron Culich - 10 Timo Juhani Lindfors - 8 Ramkumar Ramachandra - 8 Ævar Arnfjörð Bjarmason - 6 Yann Hodique - 5 Hannu Koivisto - 5 Julien Danjou - 5 Peter J. Weisberg - 4 Leo Liu - 3 Robin Green - 2 Brian Warner - 2 Christian Kluge - 2 Marc Herbert - 1 Andreas Fuchs - 1 Chris Bernard - 1 David Abrahams - 1 Dominique Quatravaux - 1 John Wiegley - 1 Paul Stadig - 1 Philip Weaver - 1 Remco van 't Veer - 1 Robert Boone - 1 Rüdiger Sonderfeld - 1 Tom Feist diff --git a/.config/emacs/lisp/magit/docs/RelNotes/1.1.0.txt b/.config/emacs/lisp/magit/docs/RelNotes/1.1.0.txt deleted file mode 100644 index 762d202..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/1.1.0.txt +++ /dev/null @@ -1,112 +0,0 @@ -Magit v1.1.0 Release Notes -========================== - -Released 23 December 2011 by Yann Hodique. - -Changes since v1.0.0 --------------------- - - * Added distinct faces for various different kinds of refs. - - * Completely redesigned existing faces. - - * Added library `magit-classic-theme.el' for users who like the old - faces better. - - * Share many more key bindings between all Magit modes. Previously - many commands were only available in certain buffers, even though - they are useful in all Magit buffers. - - * Added library `magit-simple-keys.el' for users who don't like the - popups. - - * Added support for using Ido to do completion. - - * Added support for Ediff. - - * Added shell script `magit'. - - * Added library `magit-bisect.el'. - - * Added library `magit-stgit.el'. - - * Added mode `magit-svn-mode'. - - * Added mode `magit-topgit-mode'. - - * Added mode `magit-rebase-mode'. - - * Added buttons to commit buffer to cycle to commits which were - previously shown. The commands are `magit-show-commit-backward' - and `magit-show-commit-forward. - - * Defined backward compatibility implementations of some Emacs - functions. - - * Type changes are now shown in diffs. - - * Added option `magit-set-upstream-on-push'. - - * Added option `magit-default-tracking-name-function'. - - * Added option `magit-log-auto-more'. - - * Added option `magit-create-branch-behaviour'. - - * Added option `magit-status-buffer-switch-function'. - - * Added option `magit-rewrite-inclusive'. - - * Added options `magit-highlight-trailing-whitespace' and - `magit-highlight-indentation'. - - * Added command `magit-show'. Visit REVISION:FILE. - - * Added command `magit-delete-branch-forced'. - - * Added command `magit-log-edit-toggle-author'. - - * `magit-reset-working-tree' learned to remove untracked files. - - * `magit-push' learned to set the upstream branch. - -Authors -------- - - 152 Peter J. Weisberg - 55 Yann Hodique - 18 Phil Jackson - 18 Pieter Praet - 18 Rémi Vanicat - 12 Moritz Bunkus - 10 Lluís Vilanova - 8 Eli Barzilay - 7 Nicolas Dudebout - 6 Roger Crew - 5 Štěpán Němec - 3 David Abrahams - 3 Hannu Koivisto - 3 Jeff Bellegarde - 3 Rüdiger Sonderfeld - 2 Alan Falloon - 2 Andreas Rottmann - 2 Andrew Kirkpatrick - 2 Craig Andera - 2 Jasper St. Pierre - 1 Andrey Smirnov - 1 Bastian Beischer - 1 Chris Moore - 1 Daniel Brockman - 1 Eric Davis - 1 George Kadianakis - 1 Kimberly Wolk - 1 Luke Amdor - 1 Luís Borges de Oliveira - 1 Marc Herbert - 1 Marco Craveiro - 1 Ramkumar Ramachandra - 1 Steve Purcell - 1 Thomas Jost - 1 Tibor Simko - 1 Tom Feist - 1 Ævar Arnfjörð Bjarmason diff --git a/.config/emacs/lisp/magit/docs/RelNotes/1.1.1.txt b/.config/emacs/lisp/magit/docs/RelNotes/1.1.1.txt deleted file mode 100644 index 21b3baf..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/1.1.1.txt +++ /dev/null @@ -1,25 +0,0 @@ -Magit v1.1.1 Release Notes -========================== - -Released 14 January 2012 by Yann Hodique. - -Changes since v1.1.0 --------------------- - - * `magit-svn-get-local-ref' learned to expand branch specs containing - braces. - - * `magit-log-edit' learned to amend and create commits with no message. - - * Several other fixes and improvements. - -Authors -------- - - 6 Nicolas Dudebout - 6 Yann Hodique - 1 Graham Clark - 1 Justin Caratzas - 1 Peter J. Weisberg - 1 Ryan C. Thompson - 1 Timo Juhani Lindfors diff --git a/.config/emacs/lisp/magit/docs/RelNotes/1.1.2.txt b/.config/emacs/lisp/magit/docs/RelNotes/1.1.2.txt deleted file mode 100644 index 4950edc..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/1.1.2.txt +++ /dev/null @@ -1,33 +0,0 @@ -Magit v1.1.2 Release Notes -========================== - -Released 23 September 2012 by Yann Hodique. - -Changes since v1.1.1 --------------------- - - * Modes now have proper mode-line lighters. - - * Hook variables are now defined semi-explicitly. - - * Uninteresting refs are no longer shown in logs. - - * The deprecated `assoc' library is no longer used. - - * Several other fixes and improvements. - -Authors -------- - - 13 Yann Hodique - 9 Peter J. Weisberg - 2 Jonas Bernoulli - 2 Ramkumar Ramachandra - 1 Bradley Wright - 1 Bryan Shell - 1 Damien Cassou - 1 Eric Davis - 1 John Wiegley - 1 Nic Ferier - 1 Nick Alcock - 1 Rémi Vanicat diff --git a/.config/emacs/lisp/magit/docs/RelNotes/1.2.0.txt b/.config/emacs/lisp/magit/docs/RelNotes/1.2.0.txt deleted file mode 100644 index b27f259..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/1.2.0.txt +++ /dev/null @@ -1,73 +0,0 @@ -Magit v1.2.0 Release Notes -========================== - -Released 23 September 2012 by Yann Hodique. - -Changes since v1.1.2 --------------------- - - * Rewrote the branch manager. - - * Diffs are optionally refined using `diff-refine-hunk'. - - * Added library `magit-blame.el' defining new mode - `magit-blame-mode'. - - * Added library `magit-wip.el' defining new modes - `magit-wip-save-mode' and `magit-wip-mode'. - - * New section movement commands; `magit-goto-next-sibling-section' - and `magit-goto-previous-sibling-section'. - - * Added command `magit-file-log'. - - * Added command `magit-manual-merge'. - - * `magit-delete-branch-force' was merged into `magit-delete-branch'. - - * `magit-move-branch' learned to force the rename. - - * `magit-reset-working-tree' learned to remove ignored files. - - * `magit-pull' learned to set `branch.BRANCH.merge'. - - * `magit-log-edit' learned to respect GIT_AUTHOR_EMAIL, - GIT_AUTHOR_NAME and GIT_AUTHOR_DATE. - - * `magit-visit-item' learned to visit untracked files, diffs and - hunks. - - * Added option `magit-sha1-abbrev-length'. - -Authors -------- - - 157 Yann Hodique - 61 Nicolas Dudebout - 14 Peter J. Weisberg - 12 Jonas Bernoulli - 10 Ryan C. Thompson - 7 Miles Bader - 6 Damien Cassou - 5 Samuel Bronson - 4 Dale Hagglund - 4 Eli Barzilay - 4 Takafumi Arakaki - 4 rabio - 3 Leonardo Etcheverry - 3 Nick Alcock - 3 Rémi Vanicat - 3 Rüdiger Sonderfeld - 2 Graham Clark - 2 Hans-Peter Deifel - 2 Moritz Bunkus - 1 Andreas Liljeqvist - 1 Christian Dietrich - 1 Christopher Monsanto - 1 Daniel Hackney - 1 Hannu Koivisto - 1 John Wiegley - 1 Jonathan Roes - 1 Ole Arndt - 1 Ron Parker - 1 Suhail Shergill diff --git a/.config/emacs/lisp/magit/docs/RelNotes/1.2.1.txt b/.config/emacs/lisp/magit/docs/RelNotes/1.2.1.txt deleted file mode 100644 index 6e255bf..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/1.2.1.txt +++ /dev/null @@ -1,15 +0,0 @@ -Magit v1.2.1 Release Notes -========================== - -Released 23 May 2014 by Jonas Bernoulli. - -Changes since v1.2.0 --------------------- - - * `magit-delete-directory' was rewritten to deal with an incompatible - change in `delete-directory' in Emacs v24.4. - -Authors -------- - - 1 Jonas Bernoulli diff --git a/.config/emacs/lisp/magit/docs/RelNotes/1.2.2.txt b/.config/emacs/lisp/magit/docs/RelNotes/1.2.2.txt deleted file mode 100644 index e529dc9..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/1.2.2.txt +++ /dev/null @@ -1,17 +0,0 @@ -Magit v1.2.2 Release Notes -========================== - -Released 23 October 2014 by Jonas Bernoulli. - -Changes since v1.2.1 --------------------- - - * `magit-delete-directory' uses itself when deleting recursively, - instead of `org-delete-directory' which it was copied from. - - * Many byte-compile warnings were addressed. - -Authors -------- - - 5 Jonas Bernoulli diff --git a/.config/emacs/lisp/magit/docs/RelNotes/1.4.0.txt b/.config/emacs/lisp/magit/docs/RelNotes/1.4.0.txt deleted file mode 100644 index f0f8d9e..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/1.4.0.txt +++ /dev/null @@ -1,231 +0,0 @@ -Magit v1.4.0 Release Notes -========================== - -Released 1 April 2015 by Jonas Bernoulli. - -This release sits in the middle of a commit marathon that lasted for -more than 4700 commits. - -When I became Magit's new maintainer during the summer of 2013 Magit -was already a big success, but underneath its shiny surface it was -having some serious problems. Over the years the source had gotten -very disorganized and many old abstractions were no longer sufficient. -Unfortunately existing code had almost never been adjusted when new -features had been added, leading to a lot of new code that worked -around limitations of existing code. - -This was clearly not sustainable in the long run, and so I started -cleaning up and replacing the existing abstractions with simpler, yet -often more powerful implementations. Unfortunately his had to happen -incrementally as it was seldom possible to cleanup one area without -making substantial changes elsewhere. Along the way I also addressed -many of the hundreds of feature requests, but that was more of a bonus -- the focus was on getting the codebase ready for future improvements. - -At the beginning of 2014 I moved development to the new next branch. -Working on a branch which was not used by thousands of Melpa users -allowed me to move faster and users were no longer affected by the -occasional regression. But it also meant that I now had to maintain -two branches. In hindsight I should have released the master branch -as 1.3.0 at that time, despite all the known defects it had. - -Since then I have finished the cleanup on the next branch and then -moved on to implement many new features. On the master branch the -focus was on bugfixes and the occasional backport. This release is -based on the master branch. Later this spring 2.1.0 will be released -based on the next branch. - -Compiling a list of all changes in 1.4.0 would by a major amount of -work in itself, so instead the below list is for the most part limited -to major changes, which enabled the user visible changes. Many users -don't have to be told about the new features anyway - they have been -using them for more than a year now. - -Changes since v1.2.2 --------------------- - - * The libraries `magit-topgit.el', `magit-stgit.el', and - `magit-svn.el' all reincarnated as separate repository. - - * The libraries `magit-classic-theme.el' and `magit-simple-keys.el', - which allowed users to undo some of the changes in older releases, - were removed. - - * The library `rebase-mode.el' was renamed to `git-rebase-mode.el' - and moved to the `magit/git-modes' repository. - - * The library `magit-log-edit-mode.el' was removed and replaced with - `git-commit-mode.el' from the `magit/git-modes' repository. - - * The functionality provided by the library `magit-bisect.el' was - replaced with a new implementation in `magit.el'. - - * The package `cl-lib` is now used instead of the obsolete `cl'. - - * The library `magit.el' no longer lacks any recognizable structure. - - * The macro `magit-define-command' was removed. - The hook that was defined in addition to the command only served - to make things more complicated and the generated doc-string was - insufficient. - - * The use of "section actions" has been reduced to a minimum. - Commands that behave differently depending on the type of the - current section still use `magit-section-case' or in some cases - even `magit-section-action', but the preferred way for users to - add new variants now is to add a new command to the type-specific - section keymap, instead of the hooks defined by - `magit-section-action'. - - * More work is done directly in `magit-with-section'. - Most of the helper functions were removed. These functions - were not intended to be used directly, but that did not keep - contributors from doing so, leading to many inconsistencies. - - * The mode machinery was massively refactored. - Most importantly the new macro `magit-mode-setup' was added, - replacing the old `magit-mode-init' which forgoes most of the - things each and every of its callers has to do, which let to many - inconsistencies - - * The refresh machinery was massively refactored. - A refresh now has to be requested more explicitly by either calling - `magit-refresh' or one of the functions that call Git and then the - former. Also, refreshing now more often correctly preserves point. - - * Washing diffs now takes less cycles. - Previously the code used to wash diffs was very complicated. It - passed around state using many dynamically bound variables, and - called `git diff' many times. Now we call `git diff' once and then - wash its output in one go. - - * Commits and stashes are now washed using the regular diffwasher. - - * Low-level functions for running Git were massively refactored, and - many new variants were added. Previously many callers had to deal - with the gory details themselves (and usually did it badly). - - * The output from processes is now logged in a dedicated buffer. - From this buffer it's also possible to kill a running process. - - * The Wazzup buffer was massively refactored. - All options to optionally make it faster were removed, as it is now - faster out-of-the-box without sacrificing any functionality at all. - - * Many more competing abstractions were unified. - It was common to have one no longer sufficient core abstraction, and - several competing wrapper abstractions. In most cases this has been - replaced with a single, less complex implementation, which serves all - of the current use cases. - - * Refreshing "after a asynchronous process has run" now happens after - the process has actually finished. That was always the intention, - but not what actually used to happen. - - * The commit message is no longer provided when calling `git commit'. - Instead Git populates a file with a template and then uses $EDITOR - to have the user edit that. This did not work so well for a while - but now we succeed in having the emacsclient being used as $EDITOR. - - * A new Branch Manager was added. - - * Log learned to show optionally show author information in the - margin. - - * Terminology with regards to what a tracking branch is, was fixed. - - * When creating a new branch the default choice is what Git would - default to, instead of some silly name. - - * Tools used to test whether Git supports certain features was removed. - Instead we now require a non-ancient version of Git. - - * The shell script `magit' reincarnated as a separate repository. - -Authors -------- - - 1838 Jonas Bernoulli - 171 Yann Hodique - 121 Pieter Praet - 59 Rémi Vanicat - 24 Nicolas Dudebout - 21 Takafumi Arakaki - 16 acple - 14 Phil Jackson - 13 Rüdiger Sonderfeld - 12 Mitchel Humpherys - 8 Servilio Afre Puentes - 7 Ramkumar Ramachandra - 7 Teruki Shigitani - 6 Lluís Vilanova - 6 Sergey Vinokurov - 5 Thierry Volpiatto - 4 Moritz Bunkus - 4 Noam Postavsky - 4 Seong-Kook Shin - 3 Laurent Laffont - 3 Leonardo Etcheverry - 3 Loic Dachary - 3 Raimon Grau - 3 Sébastien Gross - 2 Bastian Beischer - 2 Damien Cassou - 2 Evgkeni Sampelnikof - 2 Greg A. Woods - 2 Greg Sexton - 2 Jesse Alama - 2 Leandro Facchinetti - 2 Nguyễn Tuấn Anh - 2 Nick Alexander - 2 Pekka Pessi - 2 Philippe Vaucher - 2 Rafael Laboissiere - 2 Sebastian Wiesner - 1 Abdo Roig-Maranges - 1 Adam Spiers - 1 Andrei Chițu - 1 Andrew Schwartzmeyer - 1 Brandon W Maister - 1 Chris Done - 1 Chris Ring - 1 Christopher Monsanto - 1 Cornelius Mika - 1 Dan LaManna - 1 David Hull - 1 Dennis Paskorz - 1 Divye Kapoor - 1 Eric Schulte - 1 Felix Geller - 1 Feng Li - 1 Geoff Shannon - 1 Jan Tatarik - 1 Jeff Dairiki - 1 John Wiegley - 1 Jordan Greenberg - 1 Kyle Meyer - 1 Lele Gaifax - 1 Manuel Vázquez Acosta - 1 Marcel Wolf - 1 Marian Schubert - 1 Matus Goljer - 1 Nick Dimiduk - 1 Nicolas Richard - 1 Peter J. Weisberg - 1 Philipp Haselwarter - 1 Prathamesh Sonpatki - 1 Romain Francoise - 1 Roy Crihfield - 1 Sanjoy Das - 1 Sergey Pashinin - 1 Steve Purcell - 1 Steven Chow - 1 Steven Thomas - 1 Thomas Frössman - 1 Thomas Riccardi - 1 Ting-Yu Lin - 1 Wilfred Hughes - 1 Win Treese - 1 York Zhao - 1 aaa707 - 1 Ævar Arnfjörð Bjarmason diff --git a/.config/emacs/lisp/magit/docs/RelNotes/1.4.1.txt b/.config/emacs/lisp/magit/docs/RelNotes/1.4.1.txt deleted file mode 100644 index 15dc747..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/1.4.1.txt +++ /dev/null @@ -1,31 +0,0 @@ -Magit v1.4.1 Release Notes -========================== - -Released 12 April 2015 by Jonas Bernoulli. - -This is a bugfix release. - -Changes since v1.4.0 --------------------- - - * The external library `magit-log-edit.el' is no longer supported. - If it is still installed, then instruct the user to remove it. - - * The function `magit-maybe-show-setup-instructions' is now run even - when `magit' has not been loaded by the time `after-init-hook' ran. - - * Invalid `:package-version' keywords in option definitions were - fixed. In some cases the value was "2.1.0" instead of "1.4.0". - - * Some unnecessary obsolete-variable definitions were removed. - - * Running tests on Travis CI was fixed. - - * The Makefile, README.md, and release notes received minor fixes - and cleanup. - -Authors -------- - - 9 Jonas Bernoulli - 1 Noam Postavsky diff --git a/.config/emacs/lisp/magit/docs/RelNotes/1.4.2.txt b/.config/emacs/lisp/magit/docs/RelNotes/1.4.2.txt deleted file mode 100644 index b50f1a8..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/1.4.2.txt +++ /dev/null @@ -1,23 +0,0 @@ -Magit v1.4.2 Release Notes -========================== - -Released 8 June 2015 by Jonas Bernoulli. - -This is a bugfix release. - -Changes since v1.4.1 --------------------- - - * Automatic revers of file-visiting buffers now works again in Emacs - version 24.5. It was broken due to an incompatible change in that - Emacs release. - - * Git's reflogs sometimes end with bogus entries. We now work around - that when listing stashes. - -Authors -------- - - 11 Jonas Bernoulli - 1 Peter Vasil - 1 Steven E. Harris diff --git a/.config/emacs/lisp/magit/docs/RelNotes/2.1.0.txt b/.config/emacs/lisp/magit/docs/RelNotes/2.1.0.txt deleted file mode 100644 index 85e8d41..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/2.1.0.txt +++ /dev/null @@ -1,433 +0,0 @@ -Magit v2.1.0 Release Notes -========================== - -Released 1 July 2015 by Jonas Bernoulli. - -This release marks the end of a commit marathon that lasted for more -than 4700 commits. It is the first major release in over two and a -half years. The last major release was 1.2.0, which was released -under old leadership. Version 1.4.0, which I released earlier this -year, for the most part consisted of changes that prepared for this -release (so you might want to read the respective release notes too). - -This release comes with many new and exciting features, but the most -important change is the massive increase in consistency both in the -user interface and the internal abstractions. - -Magit always provided a very intuitive staging interface, which is -vastly superior to `git add --interactive'. This release extends this -to other apply variants. Starting with this release, other areas have -also begun to be more than just incremental improvements over what Git -itself provides. But this is still limited to certain features which -have gotten more attention than others (most prominently rebasing). - -Interlude ---------- - -The code base is finally in a state that allows me to concentrate on -implementing my vision of what version control could be like. But -this will only be possible if, unlike during the last two and a half -years, I am being paid for my work. - -I intend to run a fund-raising campaign, but you can already donate -now (see http://magit.vc/donations.html). I am also looking for -corporate sponsorship and/or employment. One area where Magit -actually lags behind other Git clients is integration with Git hosting -platforms and code review tools. I hope that these platforms have an -interest in being supported by the best Git client and are willing to -pay for it. - -I am very interested in a job that would let me work on Magit *and* on -other projects, which would benefit from the skills I have acquired -integrating two complex systems and dealing with all the social and -technical challenges that arise when running a popular project. - -Changes since v1.4.0 --------------------- - - * A new manual has been added. It's much more comprehensive than the - old manual and instead of just documenting the various commands and - options, it also explains concepts and plumbing functions, and - comes with extensive indices for commands, functions, and options. - - Actually three new manuals were added; the packages `magit-popup' - and `with-editor' are documented in separate manuals. - - The manuals are written in Org mode and then exported to Texinfo. - - * Performance is much better now. In most cases this was achieved by - delaying work until it is actually needed. Most importantly diffs - are only partially washed until being fully expanded. Some - features come in a fancy and in a fast variant; when that is the - case, we now usually default to the fast variant. - - * Many options can now be set on a per-repository basis, and the - manual describes how to do so. (Actually this was always possible - but, because it was undocumented, nobody did it.) It's possible to - define "repository classes", e.g. "huge repositories", and then add - the respective repositories to that class. This is very useful in - order to turn off certain features only in repositories where they - would have a negative impact on performance, without having to do - it for each repository individually. - - * Many faces have been simplified. Most importantly, section heading - faces no longer set a background color (except for hunk headings) - and instead just use the default background. Refname faces no - longer set the background color or the box property. - - * Many, probably the majority of, functions, variables, and faces - have been renamed, which was necessary because there was very - little consistency before. - - Most importantly, the names of commands and options now begin with - a prefix that includes the name of the respective git sub-command. - For example, the names of all commands and options related to - diffing now begin with `magit-diff-'. - - Many plumbing functions and variables were also renamed. In some - cases, that also lead to shared prefixes, such as `magit-process-', - `magit-mode-', `magit-git-', and `magit-insert-'. But many - plumbing functions and variables continue to use names whose only - common part is the `magit-' prefix. - - Future renames will be performed at well defined times and obsolete - function/variable definitions will be provided for backward - compatibility. No renames are planned at present. - - * The external libraries `git-commit-mode.el' and `git-rebase-mode.el' - are no longer required and have to be uninstalled because they - conflict with their successors `git-commit.el' and `git-rebase.el', - which are now maintained inside the Magit repository instead of the - Git-Modes repository. - - The library `git-commit.el' can be used without Magit, so it is - distributed as a separate Elpa package. However, `git-rebase.el' - now depends on several Magit libraries and is therefore distributed - as part of the `magit' package. - - * The library `magit-key-mode.el' was removed and replaced with - `magit-popup.el'. The new implementation is much more flexible and - easier to use than the old one. Major new features include setting - default arguments directly inside the popup and macros for defining - new popups and extending existing popups. - - This new library can also be used by packages that are not related - to Magit and is therefore available as a separate Elpa package. - - * The library `with-editor.el' was added. Its purpose is to use the - emacsclient as $GIT_EDITOR when git is started as a subprocess and - requires an editor. This is used while committing and rebasing. - This also works over Tramp, where a "sleeping editor" shell script - is used to communicate over standard output instead of a socket - like the emacsclient does. - - The `1.4.0' release already supported this, but this release splits - this feature into a separate library. And now that it is a separate - library, it can also be used by packages that are not related to - Magit. `with-editor.el' is distributed as a separate Elpa package. - - * All libraries are now located in the new `lisp/' subdirectory. - - * The library `magit.el' has been split into many new libraries. - The code base is now much better organized. Together with the - description of plumbing commands in the manual, this should make it - much easier for contributors to get started. - - * The library `magit-wip.el' has been rewritten from scratch and no - longer depends on the external and unmaintained shell script from - https://github.com/bartman/git-wip. - - * There are now three different modes that commit to the - work-in-progress refs before/after certain events, and in addition - to the old working tree wip refs, these modes now also commit to - index wip refs. When these new modes are turned on, Git's - protection of committed (but dangling) changes is effectively - extended to uncommitted changes (which some exceptions). These - modes are not enabled by default due to performance concerns. - - * The library `magit-blame.el' has been rewritten from scratch. The - new implementation can blame recursively, jump to the next/previous - chunk from the same commit, replace headings with separator lines, - scroll the revision buffer for the chunk at point (like log buffers), - and fine-tune the arguments for `git blame' using a popup. - - * The new library `magit-ediff.el' replaces the old Ediff support. - The new implementation comes with a dwim command and a popup, and - it relies less on high-level functions provided by VC and Ediff - itself, because many of those turned out to be unsuitable. - - * The popular third-party library `dash.el' is now required. This - is the only mandatory external dependency now, except for Git and - Emacs themselves, of course. - - * When using Ido inside Magit, users now have to install the - third-party library `ido-completing-read+.el'. This is necessary - because the function `ido-completing-read', which is part of the - built-in library `ido.el', is not a sufficient drop-in replacement - for `completing-read'. - - * The new macro `magit-insert-section' replaces `magit-with-section'. - The macros `magit-cmd-insert-section' and `magit-git-insert-section' - were removed without a direct replacement. - - * The new functions `magit-insert' and `magit-put-face-property' take - care of working around the fact that negative overlay priorities - are not supported, i.e., that overlays always take precedence - against text properties. Previously this was done in various - places, and not always correctly (e.g., in some cases overlays did - not evaporate). - - * The section visibility and movement commands were rewritten from - scratch. All those commands now share the prefix `magit-section-' - and edge cases are handled better. New commands were added that - allow cycling the visibility of sections and their children. From - a user perspective Magit's section handling is now quite similar to - that of Org mode. - - * The macro `magit-section-action' was removed. The related macro - `magit-section-case' still exists and will continue to do so. The - action variant provided user-customizable hooks, but these hooks - were rarely, if ever, used. Instead of such action hooks, users who - wish to extend Magit now have to use type-specific section keymaps. - - * Section highlighting was rewritten from scratch. The new - implementation uses hooks to allow washing certain section types - differently than others - without obfuscating the simple cases. - Washing diffs is much more complicated than washing all other - sections, and that part has been factored out. The washing of - all other section types is now quite simple. - - * The appearance of the region now indicates whether it is valid as a - selection. As far as Magit is concerned, valid selections are hunk - internal regions and regions that mark sibling sections of the same - type. When a region does not satisfy one of these, then it is - displayed the sames as in other buffers and Magit cannot act on it. - - * The new option `magit-no-confirm' makes it easy to forgo having to - confirm potentially dangerous actions. Many of these actions are - only dangerous for users who don't know how to undo them. When the - wip modes are turned on, many more previously fatal actions can be - easily undone. Adding `safe-with-wip' here makes it unnecessary to - confirm these actions. - - * The new Refs buffer combines the features of the old Wazzup and - Branch Manager buffers into one, more powerful and efficient - synthesis. For each reference, cherries can be shown by expanding - the ref section, but unlike in the Wazzup buffer, the cherries are - not calculated until the expansion happens, making it vastly more - efficient. Besides local and remote branches, the buffer now also - lists tags, and users can add additional sections listing other - refs, e.g., stashes. The format of refs headers is now - customizable. - - * File-visiting buffers are now reverted without using code from the - built-in `autorevert.el` library. The function we previously used - was intended for internal use only and indeed, changes made there - broke Magit in the past. - - * The new option `magit-revert-buffers' controls whether and how - buffers visiting tracked files are reverted. As before, such - buffers are reverted by default. But by default this is now done - rather noisily to encourage users to read the doc-string and - pick what is right for them. It's now also possible to revert - asynchronously and for the user to be asked every time there are - buffers that could be reverted. This option replaces - `magit-auto-revert-mode`. - - * Many new section inserters are available. Some are variations of - default inserters; `magit-insert-unpulled-cherries', for example, is - like `magit-insert-unpulled-commits' but prefixes each commit with - "+" or "-" to indicate its "cherry state". Other inserters are - completely new (e.g., `magit-insert-unpulled-module-commits'). - - * The header sections in status buffers can now be customized using - the new `magit-status-headers-hook'. This is an additional section - insertion hook; separating it from `magit-status-sections-hook' - gives users complete control over what information is displayed in - the headers, while still making the first header the parent section - of all the other header lines. - - * Many commands that previously could only act on the section at - point can now act on all sections selected by a region, which can - span sibling sections of the same type. - - * Many commands now more intelligently dwim based on the section at - point. - - * Where it makes sense, completion and confirmation have been merged - into a single user action. Many commands that previously allowed - carrying out or aborting some action now also allow the user to act - on something different from the default choice. Where one - previously had to confirm with `yes RET', one now confirms with just - `RET' (to accept the default choice, which previously was the only - choice). - - * The distinction between the various "apply variants" has been - clearly worked out, and they now all provide the same feature set. - The variants are: stage, unstage, discard, reverse, and "regular - apply". In all cases, it is possible to act on a file or hunk, or - part of a hunk. When acting on the hunk level, all variants are - implemented on top of `git apply', thus the name "apply variants". - - Un-/staging has always been one of Magit's most beloved features, - and this release takes it to the next level by making the other - apply variants just as consistent, powerful, and intuitive to use. - - All apply variants are context aware, meaning that, for example, the - stage variant knows that an already staged change cannot be staged. - That leads to better error messages. - - * The committing prefix now features additional variants. It was - already possible to quickly create a fixup or squash commit; the - new variants do that and then also instantly perform a rebase to - actually combine these commits with their intended target commits. - - * Rebase sequences are now initiated from the new rebasing prefix. - Several rebasing variants exist, of course including basic - "rebase onto something" and interactive rebase. Other variants - automatically detect and combine squash and fixup commits with - their intended targets. Others let the user edit or reword a - single commit, without having to go through the steps that are - irrelevant in these cases. - - * When a rebase sequence stops at a commit, then the rebasing prefix - instead features suffix commands for continuing, editing, or - aborting the sequence; or skipping the current commit. - - * When a rebase sequence stops, the status buffer displays a list of - the already applied and yet-to-be applied commits. These commits - can be acted on like those in logs. - - * Cherry-picking, reverting, and applying patches using `git am' are - treated the same way as rebasing. A prefix command features - several variants to initiate the sequence. When a sequence is in - progress, then the same prefix instead features suffix commands for - continuing or aborting the sequence, and the status buffer lists - the relevant commits. - - * The magit-specific "rewriting" feature has been removed because it - was a hybrid of "rebasing" and "cherry-picking" and vastly - inferior to both of them. - - * The merging prefix features several new convenient merge variants. - - * Merges can now be previewed before actually carrying them out. - - * When a merge results in conflicts then the commits being merged are - listed in the status buffer, making it easier to review conflicting - changes in the context they were created. - - * Its now possible to discard one side of a conflict directly from - the hunk containing the conflict, using the regular discard key - `k'. It's also possible to restore a conflict. - - * When using an existing branch as the starting-point of a new - branch, it is now automatically configured as the upstream branch. - - * The branching prefix now features suffix commands for un-/setting - the upstream branch. Previously this was coupled with pushing in - a truly obscure way. - - * Branch descriptions can now be displayed in the refs or status - buffer, and the description can be edited using a suffix command - from the branching prefix. - - * The URL of a remote can now be changed from the remoting prefix. - - * A new pulling prefix command was added, which features several new - pulling variants. Previously only one pulling command existed and - it had to be controlled using prefix arguments, which was very - cumbersome. - - * A new pushing prefix command was added, which features several new - pushing variants. Previously only one pushing command existed and - it had to be controlled using prefix arguments, which was very - cumbersome. - - * The various tagging commands are now suffix commands of the new - tagging prefix command. - - * It is now possible to stash, or create a snapshot from, just the - staged or the unstaged changes, instead of both. Suffix commands - for branching, listing, and showing stashes were added to the - stashing prefix - - * When creating stashes the new implementation in `magit-wip.el' is - used instead of `git stash'. This allows the user to create - snapshot stashes without touching any files in the working tree. - - * The submodule prefix now features new suffix commands for adding, - setting up, and fetching modules. - - * Submodules with unmerged commits can now be displayed in the status - buffer. Sections representing submodules can be expanded to show - their unpulled commits. These commits can be acted on like commits - belonging to the super-project. - - * Support for displaying diffs inside the log buffer instead of in a - separate diff buffer has been removed. It might come back one day, - but the old implementation had just fallen behind regular one-line - log too much. - - * The logging prefix features many new infix arguments and suffix - commands, which can now be combined in more flexible ways than - before. - - * Many commands that previously read a single commit, branch, or - file in the minibuffer, can now read multiple, comma-separated items - from the user, while providing completion candidates for all of - them. Likewise, when selecting a range, completion is available - for the second commit too. - - * All of Git's reset variants are now exposed as individual commands, - but not all of them have a key binding by default. - -This was just the tip of the iceberg. - -Authors -------- - - 2187 Jonas Bernoulli - 28 Sebastian Wiesner - 25 Kyle Meyer - 19 Noam Postavsky - 17 Pieter Praet - 12 Rémi Vanicat - 9 Florian Ragwitz - 5 Philippe Vaucher - 5 Ramkumar Ramachandra - 4 Cornelius Mika - 4 Kan-Ru Chen - 4 Syohei Yoshida - 3 Alex Dunn - 3 Alex Kost - 3 Nicolas Richard - 2 Eric Schulte - 2 Ingo Lohmar - 2 Mitchel Humpherys - 2 Peter Eisentraut - 2 Ryan C. Thompson - 1 Adeodato Simó - 1 Andrew Schwartzmeyer - 1 Andy Sawyer - 1 Bradley Wright - 1 Guillaume Martres - 1 John Mastro - 1 John Wiegley - 1 Julien Danjou - 1 Lingchao Xin - 1 Mark Oteiza - 1 Michael Fogleman - 1 Michael Griffiths - 1 Michal Sojka - 1 Natalie Weizenbaum - 1 Oleh Krehel - 1 Peter Vasil - 1 Rüdiger Sonderfeld - 1 Steven E. Harris - 1 Teemu Likonen - 1 Thomas A Caswell - 1 Tim Perkins - 1 Tim Wraight - 1 Wei Huang - 1 Xavier Noria diff --git a/.config/emacs/lisp/magit/docs/RelNotes/2.10.0.txt b/.config/emacs/lisp/magit/docs/RelNotes/2.10.0.txt deleted file mode 100644 index bb42609..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/2.10.0.txt +++ /dev/null @@ -1,85 +0,0 @@ -Magit v2.10.0 Release Notes -=========================== - -Released 4 January 2017 by Jonas Bernoulli. - -We are pleased to announce the release of Magit version 2.10.0, -representing 85 commits by six people over one month. - -Also see https://emacsair.me/2017/01/04/magit-2.10. - -Changes since v2.9.0 --------------------- - -* Many new, well organized, libraries were added, consisting of code - that was previously located inside a messier "magit.el". #2908 - -* The function `magit-display-buffer' now sets the focus on the frame - used to display the selected window. #2865 - -* The Custom groups are better organized now. New groups were added, - but many options also moved between groups that already existed - before. 422d776e, 33c5c1ca - -* Many Custom groups and options now link to the relevant Info nodes - and to other relevant groups. 810d7fb4 - -* Many doc-strings were improved, added, and fixed. 47aae617 - -* Added the function `magit-repolist-column-dirty', which can be added - to `magit-repolist-columns' and `magit-submodule-list-columns'. #2907 - -* The obsolete variable `magit-repository-directory-depth' is no - longer defined as an option. 09993c39 - -* The obsolete hook variable `magit-status-refresh-hook' is no longer - defined explicitly. 7e96e831 - -Fixes since v2.9.0 ------------------- - -* Customizations of hooks were ignored, if the `custom-set-variables' - form was evaluated before the Magit libraries were loaded. #2902 - -* When rebase stopped at a commit, point was no longer placed on that - commit. #2884 - -* When creating a commit, `magit-display-buffer-fullcolumn-most-v1' - filled the entire frame, hiding the commit message buffer. #2891 - -* The commands `magit-reflog' and `magit-reflog-current' reported - a revision's reflog as empty when the name of a file in the - repository, relative to the top-level directory, matched the - revision name. 5264ffcb - -* The function `magit-repolist-column-upstream' returned the current - branch instead of its upstream. 46acbd6d - -* The functions `magit-repolist-column-unpulled-from-upstream' and - `magit-repolist-column-unpushed-to-upstream' raised a type error - if the upstream was configured but did not exist. #2904 - -* The default values of the options `magit-submodule-list-columns' - and `magit-repolist-columns' didn't match the documentation and the - Custom type. But the code that that uses these values is resilient - against that defect and so the only effect was that the values were - reported as mismatched in the Custom interface. 79f6af23 - -* The Custom type of option `magit-update-other-window-delay' didn't - match the default value. eb6d8bde - -* The shell command generated by `magit-emacs-Q-command' could end - up trying to load a directory as a library, due to a bug in Emacs. - 83980c66, debbugs#16406 - -This release also contains documentation updates and typo fixes. - -Authors -------- - - 68 Jonas Bernoulli - 13 Kyle Meyer - 1 Aleksey Uimanov - 1 Alexander Gramiak - 1 Noam Postavsky - 1 Wouter Bolsterlee diff --git a/.config/emacs/lisp/magit/docs/RelNotes/2.10.1.txt b/.config/emacs/lisp/magit/docs/RelNotes/2.10.1.txt deleted file mode 100644 index 7f90600..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/2.10.1.txt +++ /dev/null @@ -1,57 +0,0 @@ -Magit v2.10.1 Release Notes -=========================== - -Changes since v2.10.0 ---------------------- - -* The command `ido-enter-magit-status' is now being autoloaded. #2918 - -* The minor-mode `bug-reference-mode' is now being suggested when - customizing `magit-revision-mode-hook' and `git-commit-setup-hook'. - e0d57c49 - -* The function `magit-version' can now deal with the Magit libraries - being symlinked to, which is required for the new `straight' package - manager. #2967 - -Fixes since v2.10.0 -------------------- - -* When multiple stashes were selected by the region, responding "no" - when asked to confirm the deletion of these stashes resulted in a - type error. #2917 - -* The function `magit-split-range' choked on ranges if one of the - revisions was omitted, breaking a diff variant and potentially - other uses as well. #2928 - -* The function `magit-commit-setup' called without an argument, which - causes the option `enable-local-variables' to be ignored. #2946 - -* When committing inside a repository that was created using `git - init --separate-git-dir', the diff buffer was empty, instead of - showing the changes about to be committed. For some reason that - git command, unlike other commands that do essentially the same - thing, does not set `core.worktree', which confused Magit. #2955 - -* In the repository list buffer, the columns that are supposed to list - unpushed and unpulled commit counts, were blank. #2960 - -* The command `magit-reflog-head' did not properly format reflog lines - for branch renaming events. 2a268e20 - -* The commands `magit-diff-show-or-scroll-down' and - `magit-diff-or-scroll-up' scrolled instead of updated the revision - or stash buffer, when that already showed the requested reference - but that reference no longer pointed at the same revision. #2966 - -This release also contains typo fixes and other documentation fixes. - -Authors -------- - - 16 Jonas Bernoulli - 4 Kyle Meyer - 2 Alex Kost - 1 Kévin Le Gouguec - 1 Radon Rosborough diff --git a/.config/emacs/lisp/magit/docs/RelNotes/2.10.2.txt b/.config/emacs/lisp/magit/docs/RelNotes/2.10.2.txt deleted file mode 100644 index bcaa040..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/2.10.2.txt +++ /dev/null @@ -1,47 +0,0 @@ -Magit v2.10.2 Release Notes -=========================== - -Changes since v2.10.1 ---------------------- - -* The new command `git-rebase-noop' adds a noop action during a - rebase. It can be used to make git perform a rebase even if none - of the commits are selected. #2991 - -Fixes since v2.10.1 -------------------- - -* Cherry-picking a commit with multiple parents was not possible, - because "--mainline" was treated as a switch rather than an option, - and because of a too-strict assertion that only single-parent commits - can be cherry-picked. #2978 - -* `magit-abbrev-length' mishandled two edge cases, returning 0 when - called within an empty repository or outside of a repository. - 077740f5 - -* A bug fix in the last release broke the visit-file functionality in - diff buffers displayed while committing. #2988 - -* Diff buffers did not recognize "rev^-n" as a short-hand for - "rev^n..rev" (new in Git v2.11), resulting in the buffer header - incorrectly indicating that the diff was between "rev^-n" and the - working tree. 293f0cc8 - -* In diff buffers created using the dotted range notation, the command - `magit-diff-visit-file' incorrectly swapped which revision was - visited for deleted and added lines. For example, with the range - "rev1..rev2", calling `magit-diff-visit-file' on a deleted line - visited the blob for rev2. c24f32cd - -This release also contains other minor improvements, bug fixes, and -documentation fixes. - -Authors -------- - - 10 Jonas Bernoulli - 9 Kyle Meyer - 1 Ben North - 1 Fabian Wiget - 1 Mark Oteiza diff --git a/.config/emacs/lisp/magit/docs/RelNotes/2.10.3.txt b/.config/emacs/lisp/magit/docs/RelNotes/2.10.3.txt deleted file mode 100644 index 1a77c40..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/2.10.3.txt +++ /dev/null @@ -1,41 +0,0 @@ -Magit v2.10.3 Release Notes -=========================== - -Changes since v2.10.2 ---------------------- - -* The new command `magit-do-async-shell-command' opens the file at - point with `dired-do-async-shell-command'. "&" is now bound to - this command. #2992 - -Fixes since v2.10.2 -------------------- - -* The command `magit-bisect-run' now uses a shell to run the command - entered in response to the "Enter shell command" prompt. #3001 - -* Discarding a renamed file failed if the original file was within a - directory that no longer existed. #2998 - -* When inserting information about a rebase in progress into the - status buffer, "exec" lines were treated as a commit, leading to an - error. #3002 - -* The command `magit-blame' failed in blob-visiting buffers if the - corresponding file no longer exists in the HEAD or the index. - -* The command `magit-remote-add' asked whether to set the new remote - as the `remote.pushDefault', when that variable is already set and - and it was configured not to ask in that case. 4f565039 - -This release also contains typo fixes and documentation improvements. - -Authors -------- - - 10 Jonas Bernoulli - 2 Kyle Meyer - 1 Basil L. Contovounesios - 1 Damien Cassou - 1 Duianto Vebotci - 1 Noam Postavsky diff --git a/.config/emacs/lisp/magit/docs/RelNotes/2.11.0.txt b/.config/emacs/lisp/magit/docs/RelNotes/2.11.0.txt deleted file mode 100644 index 5ceb776..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/2.11.0.txt +++ /dev/null @@ -1,210 +0,0 @@ -Magit v2.11.0 Release Notes -=========================== - -Released 13th September 2017 by Jonas Bernoulli. - -I am pleased to announce the release of Magit version 2.11.0, -representing 303 commits by 26 contributors over six months. - -Also see https://emacsair.me/2017/09/12/magit-2.11. - -Changes since v2.10.3 ---------------------- - -* The popup `magit-remote-popup' now exposes the `-f' switch for `git - remote add', which allows the user to control whether information - from the remote is fetched after the remote is added. The default - behavior is still to fetch after adding a remote (i.e., the switch - is enabled by default). #2997 - -* Added option `magit-list-refs-sortby' to allow more control over the - order of refs in prompts. #2872 - -* The Magit wrappers around the default Emacs completion functions now - override the default behavior of alphabetically sorting choices when - displaying them in the "*Completions*" buffer. In repositories with - many release tags, the new behavior prevents completion prompts from - being dominated by version tags instead of branch names. #2925 - -* The commands `magit-git-command', `magit-git-command-topdir', - `magit-shell-command', and `magit-shell-command-topdir' now use - `read-shell-command' to read the command and a shell to run it. - Packages like `pcmpl-git' and `bash-completion' can now be used - to get command-line completion when using these commands. #2951 - -* The commands `magit-git-command' and `magit-git-command-topdir' can - now call arbitrary commands. The initial-value when reading the - command is "git ", and you can remove that to call something else. - #2951 - -* Added option `magit-shell-command-verbose-prompt'. #2951 - -* The function `magit-branch-or-commit-at-point' now offers the - appropriate default choice in a `magit-merge-preview-mode' buffer - and in blob-visiting buffers. #3039, #3066 - -* On Travis tests are now run against all supported Emacs releases, as - well as against snapshots of the `master' and `emacs-25' branches. - #3046 - -* Added command `magit-debug-git-executable'. #3044 - -* Added new function `magit-display-file-buffer-other-window' to be - used as `magit-display-file-buffer-function'. - -* Added `--mainline' switch to `magit-revert-popup'. #3018 - -* Added `magit-file-checkout' to `magit-reset-popup'. #3052 - -* When a revision is shown from a log buffer, the revision buffer now - inherits the file restriction of the log buffer. #3056 - -* Added new command `magit-diff-toggle-file-filter'. #3062 - -* Added new option `magit-use-sticky-arguments' that provides more - control over how diff and log commands reuse arguments from existing - buffers. #3074 - -* Added imenu support in log, revision, and status buffers. #3022 - -* Added command `magit-abort-dwim` to abort the current operation. - Depending on the context, this will abort a merge, a rebase, a - patch application, a cherry-pick, a revert, or a bisect. #3017 - -* The command `magit-clone' now suggests a directory name that more - closely follows `git clone' when no directory is given. #3079 - -* The commands `magit-subtree-add', `magit-subtree-pull', and - `magit-subtree-push' now offer more completion candidates. #3081 - -* The log buffer now shows the line range restriction (i.e., `-L' - argument) in its header. #3075 - -* Added new functions `magit-repolist-column-branches' and - `magit-repolist-column-stashes', which insert the count of branches - and stashes into submodules and repository list buffers. By default - they are used in submodule lists but not in the repository list. - -* Text inside brackets in commit messages (including when shown in a - log) are now highlighted using face `magit-keyword'. - -* Invocations of git are cached over the whole body of - `magit-run-git', not just during the status buffer refresh. This - should make staging and unstaging slightly faster. #3096 - -* When reading a value for the `--reuse-message' option, the popup - `magit-commit-popup' now prompts with all ref names, offering - `ORIG_HEAD' as the default if it exists. #3110 - -* Added bookmark support in status, refs, log, reflog, stashes, - cherry, diff, revision, stash, and submodule-list buffers. #3113 - -* Added new function `magit-insert-modules', a wrapper around the - existing `magit-insert-modules-*' functions. Also added options - `magit-module-sections-hook' and `magit-module-sections-nested', - to allow tuning the behavior of this function. #3141 - -* Renamed function `magit-insert-submodules' to - `magit-insert-modules-overview' for consistency with other - `magit-insert-modules-*' functions. #3141 - -* Inserting module sections is much faster now. #3141 - -* Added `--no-verify' switch to `magit-rebase-popup'. #3144 - -* The `--no-verify' switch in `magit-commit-popup' is now bound to "h" - instead of "n" for consistency with `magit-push-popup' and - `magit-rebase-popup'. #3144 - -* Added support for the file "EDIT_DESCRIPTION", which is used instead - of "BRANCH_DESCRIPTION" for editing a branch's description as of Git - 2.13.0. #3149 - -Fixes since v2.10.3 -------------------- - -* Rebasing was sometimes interrupted by an error about the index lock - already being held. This happened because VC asynchronously checks - for files with conflict, which involved using a git command that - grabs the lock. Magit now redefines that VC command to use a git - command that does not grab the lock. #2708, debbugs#21559 - -* Adding an untracked subdirectory as a submodule failed if a remote - was not configured for the subdirectory repository. #3047 - -* Parsing the log buffer failed if the log displayed a ref that - contained parentheses in its name. #3028 - -* Parsing the `git show' and `git log' output for a signed commit - failed with the Git variable `log.showSignature' enabled. #3061 - -* When deleting the current branch, `magit-branch-delete' did not ask - for confirmation in some cases. #3058 - -* When using a non-standard `magit-display-file-buffer-function' that - does not select the window used to display the buffer, then the - point in that window was not adjusted. #3082 - -* `git-rebase-mode' did wrongly assume that there is no space after - the comment character in action lines that are commented out. #3085 - -* The command `magit-show-commit' mistakenly displayed a tag's commit - when point was on a branch with the same name. #3098 - -* The command `magit-log-buffer-file' miscalculated line numbers from - the region. #3075 - -* Staging a link failed when it points to a repository. - -* When setting the upstream of a branch that isn't the current branch, - the user was asked what branch to use as the upstream of the current - branch anyway, even though the correct branch would then be modified. - -* When deleting a branch that is merged into the current branch but - not into its own upstream branch, then the user was not offered to - force the deletion, causing it to fail. #3107 - -* With `find-file-visit-truename' set to a non-nil value, the commands - `magit-status' and `magit-init' failed to detect when their - directory argument was a symlink that resolved to the output of - `magit-toplevel'. #3115 - -* Using an url instead of a remote name as `branch..remote' was - not properly supported, causing issues when trying to pull or push. - #3116 - -* The log margin displayed invalid information for cherries. #3163 - -This release also contains the fixes described in the v2.10.{1,2,3} -release notes, as well as other minor improvements, bug fixes, typo -fixes, and documentation fixes. - -Authors -------- - - 148 Jonas Bernoulli - 93 Kyle Meyer - 15 Damien Cassou - 15 Noam Postavsky - 5 Basil L. Contovounesios - 3 Justin Guenther - 2 Alex Kost - 2 Duianto Vebotci - 2 Radon Rosborough - 2 Štěpán Němec - 1 Adam Benanti - 1 Allen Li - 1 Ben North - 1 Erik Anderson - 1 Eyal Lotem - 1 Fabian Wiget - 1 Ioan-Adrian Ratiu - 1 Jeremy Meng - 1 Justin Burkett - 1 Justin Thomas - 1 Kévin Le Gouguec - 1 Marc Sherry - 1 Mark Karpov - 1 Mark Oteiza - 1 Sean Whitton - 1 Yuri Khan diff --git a/.config/emacs/lisp/magit/docs/RelNotes/2.12.0.txt b/.config/emacs/lisp/magit/docs/RelNotes/2.12.0.txt deleted file mode 100644 index 5f1980b..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/2.12.0.txt +++ /dev/null @@ -1,645 +0,0 @@ -Magit v2.12.0 Release Notes -=========================== - -Released 29th March 2018 by Jonas Bernoulli. - -I am pleased to announce the release of Magit version 2.12.0, -representing 610 commits by 30 contributors over six months. - -Also see https://emacsair.me/2018/03/29/magit-2.12. - -Upcoming breaking changes -------------------------- - -* An upcoming release will remove support for older versions of Emacs. - It isn't yet certain in what Magit release that will happen and what - the new minimal version of Emacs will be. You should consider to - update to the latest Emacs release now, or at least to v25.1, which - was released one and a half years ago. - -* Likewise support for older versions of Git is going to be removed. - You should update to at least v2.4, which was released almost three - years ago. Older releases don't get security updates anymore, which - is another reason to update. - -* The option `magit-no-confirm-default' has been demoted to a variable - and will be removed in v2.13.0. Please migrate your customizations - to the new option `magit-dwim-selection'. #3232 - -Changes since v2.11.0 ---------------------- - -* Added new commands `magit-previous-line' and `magit-next-line' as - substitutes for `previous-line' and `next-line'. Magit's selection - mechanism is based on the region but selects an area that is larger - than the region. This causes shift-selection to select two lines on - the first invocation when using the vanilla commands. On section - headings and inside hunk bodies the new magit-specific variants - don't move point on the first invocation and thereby they only - select a single section or line. Which inconsistency you prefer - is a matter of preference. #2912 - - To use the Magit-specific variants add this to your init file: - - (define-key magit-mode-map [remap previous-line] 'magit-previous-line) - (define-key magit-mode-map [remap next-line] 'magit-next-line) - -* The command `magit-refs-popup' now remembers arguments and they are - displayed in the header-line of `magit-refs-mode' buffers. The popup - command still invokes the default action by default when invoked from - another buffer, but when invoked from a `magit-refs-mode' buffer it - now shows the popup. #2898 - -* The module overview section now shows a hash for modules that don't - have a tag and column alignment is optimized. #3160 - -* The diff that is being displayed while committing learned about a - few more special cases. #3095 - -* Added new command `magit-branch-or-checkout' as a potential - substitute for `magit-checkout'. Setup instructions can be found in - the manual. #3104 - -* Added new customizable options `magit-log-highlight-keywords' and - `magit-diff-highlight-keywords', which control whether text inside - brackets is highlighted in magit-log and magit-diff buffers - respectively. #3190 - -* When the names of Magit buffers are not uniquified then their names - now end with an asterisk. When the `uniquify' package is used, then - that still is not possible due to limitations in that package. #2841 - -* When selecting a fixup target then the log graph, which makes it - less likely that you attempt to modify a merged commit, which would - result in the merges being lost when rebasing. c0209c74d - -* Added the existing commands `magit-blame' and `magit-blob-next' to - the `magit-file-popup' popup. - -* Added new command `magit-blame-reverse'. See the updated manual - for information on how to best use this and other blaming commands. - #3055 - -* Keywords in brackets are now being highlighted in `magit-refs-mode' - and `git-rebase-mode' buffers, and the headers of `magit-status-mode' - buffers, like they already were in logs. #3179 - -* Added new variable `magit-buffer-lock-functions' to support - third-party packages in creating Magit-like buffers. #3191 - -* Improve padding of head-line and add new faces `magit-header-line-key' - and `magit-header-line-log-select'. #3194 - -* When a stash has a note attached to it, then show it in the - `magit-stash-mode' buffer. aff2fba8f - -* Added new command `magit-rebase-remove-commit' to the rebase popup. - -* The remote popup can now be used to set various remote related - variables. #3165 - -* Added new commands `magit-patch-apply' and `magit-patch-apply-popup'. - The latter is available from inside `magit-am-popup' ("w"). #2940 - -* Added new command `magit-patch-save' for saving a diff into a patch - file. In diff buffers it is bound to "C-x C-w". #2950 - -* Added new command `magit-stash-branch-here', which — unlike the - existing `magit-stash-branch' — creates a branch that starts at - the current HEAD instead of at the commit that was current when - the stash was created. #2935 - -* Added new command `magit-dired-log' intended to be bound in - `dired-mode-map'. #3011 - -* The list of rebase actions displayed in the status buffer now also - shows "exec" actions. #3003 - -* While it exists, the stash created by `git rebase --autostash' is - now also displayed in the list of stashes. #3146 - -* When the current branch has no upstream or when all commits have - already been pushed there, then the status buffer now shows - `magit-log-section-commit-count' recent commits. If you previously - used `magit-insert-unpulled-from-upstream-or-recent', then remove - that from `magit-status-sections-hook', as it is an obsolete alias - for `magit-insert-unpulled-from-upstream' now. #3227 - -* When switching between showing "Unmerged into " and - "Recent commits", preserve the visibility of that section. #3227 - -* When prompting for a branch to delete, the current branch is no - longer offered as default choice, except in cases where it is likely - that that is actually what the user wants. #2924 - -* Added new popup `magit-worktree-popup' and bound "%" to it. #2927 - -* The commands `magit-file-delete' and `magit-file-untrack' now act on - the selected files and with a prefix argument they force the action. - #2930 - -* When requesting the history of a single file that is no longer being - tracked, use the `--full-history' argument. Otherwise no history at - all would be shown. #3012 - -* Added new option `magit-patch-save-arguments'. #3218 - -* Leading tabs in files no longer cause misalignment in diffs. This - is done by overriding the mechanism used by the display engine to - determine how wide a tab should be, which doesn't work when there - are additional characters before the "leading" tabs that should - count as an additional, but very short tab-stop. #3185 - -* The command `magit-visit-ref' now drops the prefix argument before - calling `magit-show-commit' when appropriate, and when using the - `create-branch' variant and the branch exists, then it offers to - simply checking it out instead of resetting it first. #3009 - -* The output of `magit-list-repositories' is now sorted by module path - instead of module name. b6f6cf4a6 - -* For a long time Magit has supported selecting two or more sibling - sections using the region and then acting on that selection instead - of only on the current section. Single-section selections were not - supported and a region that did not span multiple siblings was not - visualized as a selection. Now that is supported. - - Not every section-aware command was adjusted to take single-section - selections into account because in many cases that would have led to - undesired changes in behavior. #3026 - -* The command `magit-branch-spinoff' now spins off just HEAD when that - constitutes the single-section selection. Previously one could only - spin off all commits that weren't in the upstream yet or at least - two commits. #2920 - -* Added switch `--local-user' to the tag popup. #3237 - -* When discarding untracked files, then offer to delete the buffers - visiting them. #3243 - -* When there is a valid selection based on the region, then the region - itself was never visualized. Now it is, but only if it stays within - a single line. #3249 - -* Added new command `magit-branch-checkout' and bound "l" in the - branch popup to it. This command always checks out a local branch. - Valid inputs are an existing local branch, a remote branch for which - no corresponding local branch exists, and a new branch name that - doesn't match the name of any existing local or remote branch. #2906 - -* The command `magit-show-commit' now offers the revision at point as - the default completion choice if the less generic mechanisms used to - determine the "current" revision fail. This is useful for visiting - revisions mentioned in commit messages. #2949 - -* Hashes inside commit messages are now turned into `commit' sections. - Note that this can be disabled and that even if you do so you can - still visit the commit at point using "RET". #2949 - -* The documentation regarding completion, confirmation, the selection, - and the hunk-internal region was significantly extended. It might - be worth reading that. - -* Added new option `magit-dwim-selection', which allows configuring - commands that would otherwise ask the user to select among possible - candidates to use the default instead, with or without confirmation. - #3232 - -* When there is a stash at point, then the commands `magit-stash-drop' - and `magit-stash-pop' now ask for confirmation. The former command - previously allowed users to select another stash instead and the - latter used to act on the stash at point without giving the user a - chance to abort. These changes are implemented using the new option - `magit-dwim-selection' and can easily be reverted. #2916 - -* Aborting a commit is seen as an error by Git and like all such - errors it was reported to users, which led to confusion and a few - bug reports. Now that non-error is being suppressed. #2932 - -* The option `magit-ref-namespaces' was demoted to a variable and its - format changed. #2923 - -* Some refs that are being displayed in logs are now being compressed - to save space while providing more information. #2923 - -* Added new option `magit-submodule-fetch-jobs'. By default multiple - modules are being fetched in parallel now. #3261 - -* The command `magit-show-commit' now also shows notes specified using - `notes.displayRef', not just those specified using `core.notesRef'. - #2857 - -* The package `magit-popup' is maintained in its own repository now. - 4d5d9bfac - -* The popup `magit-notes-popup' now shows the values of the relevant - variables and allows changing them. #2857 - -* The cherry-picking commands now try to use or not use the - `--mainline' argument as appropriate instead of erroring out. #2980 - -* Added `magit' as an alias for `magit-status' because I have been - told that that improves discoverability. This might or might not - make it easier for users to get started with Magit without taking - a brief glimpse at the documentation. #3290 - -* The command `magit-log-buffer-file' now also works in Dired buffers. - -* The commands `magit-stage-untracked' has been taught about the Borg - package manager. When staging a package repository it now offers to - also assimilate (aka install) that package. dc857e2ed - -* Added new command `magit-browse-pull-request', which reads an open - pull request and then visits it in a browser. For now this only - supports Github, but other Git forges will be supported in the - future. #3134 - -* Added new commands `magit-checkout-pull-request' and - `magit-branch-pull-request' to the branch popup. For now they only - support Github, but other Git forges will be supported in the future. - #3134 - -* The command `magit-branch-delete' now offers to also delete the - corresponding remote after deleting a local branch that was created - with `magit-branch-pull-request' or `magit-checkout-pull-request', - provided that remote has no other tracking branches. #3134 - -* When it is not possible to blame in reverse, then the blame popup - does not offer that command anymore. c6ef61b2e - -* The mode line process indicator, displayed in the mode line when Git - is run for side-effects, is now more visible than before, and is - additionally used to highlight process errors. - - New face `magit-mode-line-process' is applied to the mode line - process indicator to improve the visibility of pending asynchronous - processes (in particular), as Magit remains responsive after - initiating such commands (for instance fetching or rebasing), but - will not update its buffers until the process has completed, which - might take longer than anticipated. Customize this face if you wish - to make this indicator more (or less) visible. #3284 - - If the Git process returns an error, the mode line process indicator - is no longer removed, and new face `magit-mode-line-process-error` - is applied to highlight the error status. Details of the error from - the process buffer are also provided as a tool-tip. The error - indicator will remain visible in the mode line until a magit buffer - is refreshed. If you do not want errors to be indicated in the mode - line, customize the `magit-process-display-mode-line-error' user - option. #3297 - -* When staging and unstaging at the file level and there are arguments - that cause whitespace differences to be hidden, then apply the - visible changes using `git-apply' instead of using `git-add' and - `git-rm' because doing that would also un-/stage the invisible - changes. #3102 - -* Added new command `magit-diff-visit-file-other-window'. It isn't - bound by default because that would result in changes to existing - key bindings, which is something that is frowned upon. To use this - command add something like this to your init file. #2833 - - (define-key magit-file-section-map (kbd "SPC") - 'magit-diff-visit-file-other-window) - (define-key magit-hunk-section-map (kbd "SPC") - 'magit-diff-visit-file-other-window) - -* The widths of tabs in diffs can now be adjusted to match the widths - that would be used in the corresponding file-visiting buffers. This - is disabled by default because it can be expensive to determine the - appropriate values (and also unnecessary when using spaces for - indentation). Use the new option `magit-diff-adjust-tab-width' to - control if and when the tab widths should be adjusted. #2929 - -* Added documentation about how to contribute to the documentation. - -* In the references buffer the remote part of the branch names are now - hidden in the remote specific lists of branches by default, which is - done to preserves space. The option `magit-refs-show-remote-prefix' - can be used to revert this change. - -* The mode `git-commit-mode' now offers three font-lock levels, - including one that is fruitier than the previous font-lock level. - Local and remote branches are shown using different colors now. - 7a50bfdb0 ff - -* When a signed tag points at the shown revision, then the revision - buffer now also contains information about the tag signature. #3015 - -* The commands `magit-remote-remove' and `magit-branch-delete' now - unset the relevant push-remote related variables, which Git fails to - do, unlike for other variable affected by the removal of a remote or - branch. Likewise the command `magit-remote-rename' now renames such - variables. #2850 - -* Depending on the value of the new `magit-branch-rename-push-target' - option the command `magit-branch-rename' may now also preserve the - local branch's push-remote or even rename the push branch on the - remote. The default is to do both. #2850 - -* Added argument `--subject-prefix' to the patch popup. 24ce90832 - -* The section visibility is now being cached for all sections. - Previously this was only done for some sections. When a section - disappeared and later appeared again, then it went back to its - initial visibility. The option `magit-section-cache-visibility' can - be used to restrict the cache to certain sections again. #2780 - -* The section visibility cache can now also remember that a section - should be expanded instead of being hidden when the latter is the - default and the section reappears. Previously only the opposite - was possible. #2780 - -* For `magit-status-mode' and `magit-refs-mode' buffers the visibility - cache now persists when killing the buffer. #2780 - -* Added command `magit-remote-prune-refspec', which is necessary - because Git does not ignore invalid refspecs and instead refuses - to fetch using only the refspecs that are still valid. #3134 - -* Sections are now defined as classes instead of as structs. This - is only a first step towards taking advantage of generic methods. - A few subclasses are already being defined and dedicated slot - accessors have been deprecated in favor of `oref'. 651a9abcc ff - -* When asking the user whether to save modified file-visiting buffers - during a refresh, then also allow them to remember the choice for - the current session. I still think it is better to just always save - by setting the option `magit-save-repository-buffers' to `dontask'. - #3344 - -* The terminology about modules as used by Git is ambiguous. Magit - now avoids the term "initialized" and instead uses the term - "populated" to refer to a module whose working directory exists. - The names of commands have been adjusted accordingly. For example, - unlike "git submodule init", which does *not* actually "initialize" - a module, `magit-submodule-popuplate' does "populate" a module - (using "git submodule update --init"). #2911 - -* Most module commands now default to act on the selected modules or - if no modules are selected the current module, if any. Otherwise - they fall back to read a single module from the user. Previously - some of these commands acted on all modules and it was not possible - to perform the respective actions on a subset of modules. Acting - on all suitable modules is still possible using a prefix argument. - #2911 - -* Many arguments have been added to the module popup. #2911 - -* Added new option `magit-refs-filter-alist', which allows omitting - some references from being displayed in `magit-refs-mode' buffers. - -* Added new command `magit-merge-squash'. #3348 - -* Several new libraries were created from code previously in magit.el. - 0d6389680 - -* Added new commands `magit-merge-absorb' and `magit-merge-into', - which not only merge a local branch into another but also remove - the merged branch. #2922. - -* Added new commands `magit-cherry-harvest', `magit-cherry-donate', - `magit-cherry-spinout' and `magit-cherry-spinoff', which move - commits from one branch to another and also remove them from the - branch where they were previously located. #2921 - -* Added new command `magit-diff-unmerged' and taught `magit-diff-dwim' - about unmerged changes too. #3382 - -* The command `magit-push-refspecs' got its own history variable. - #3361 - -* By default the names of Magit buffers now either have a star at both - ends, or at neither when using the `uniquify' package. 831372a4f - -* Added new commands `magit-branch-shelve' and - `magit-branch-unshelve'. Use them to replace a branch with a less - visible ref while preserving the ref log. This is useful for work - that you probably but not certainly will end up discarding. You - might want to add these commands to the branch popup. 568b11f64 - -* The look of `magit-refs-mode' buffers was changed to save horizontal - space and three new options `magit-refs-primary-column-width', - `magit-refs-focus-column-width' and `magit-refs-pad-commit-counts' - were added. #3378 - -* When the dispatch popup is invoked in non-Magit buffers, then certain - actions that cannot be used there are no longer shown. 83cc91a30 - -* When the dispatch popup is invoked in a file-visiting buffer, then - it now also lists the actions from the file popup. 40361273a - -* Added new variable `magit-log-format-message-function'. #3384 - -* Added commands `magit-commit-reshelve' and `magit-reshelve-since', - replacing and improving upon commands from the `magit-rockstar' - package, which was deprecated. The former changes the dates of HEAD - and the latter those of a range of commits leading up to HEAD. - -* Added argument `--reverse' to the log popup. When that argument is - used, then the incompatible `--graph' is silently dropped. 07e1d69d2 - -* Added new option `magit-log-header-line-function'. #3395 - -* Added new command `magit-remote-prune'. 6258dd92c - -* Added new hook `magit-unwind-refresh-hook', which is like the - existing `magit-post-refresh-hook' except that is runs even if an - error occurs during the refresh. 9f838cc04 - -Fixes since v2.11.0 -------------------- - -* `git-commit-propertize-diff' could end up making the buffer - read-only. 746f2361b - -bc1093846 magit-popup: locally set help-window-select when describing function -c9689c670 magit-popup: locally set another display-buffer variable - -* `git-rebase-mode-show-keybindings' failed to process non-English - usage instructions in interactive rebase buffers. #3175 - -* The refresh cache was not properly invalidated after creating a new - repository. 7a1f1eb44 - -* The `with-editor-mode' minor-mode was sometimes enabled twice in the - same buffer. 9be36868b - -* For bare repositories all files were shown as being deleted in some - contexts. b5f05c457 - -* When a command was invoked from a popup and it set `this-command', - then that was later overwritten. a74c9b9d4 - -* While setting `magit-credential-cache-daemon-socket's initial value - an error occurred when `credential.helper's value is the empty string. - 4b15d5825 - -* Fixup commands did not warn about merges in the rebase range until - after creating the fixup commit. #3176 - -* Instant fixup allowed selecting a commit that is not reachable from - HEAD, which, for the instant variants (but only those), clearly is - a user mistake that should be caught immediately. #3176 - -* If `magit-git-executable' is an absolute path, then an error - occurred in `magit-debug-git-executable'. 9b7e34c29 - -8ed2eb4f5 magit-branch-reset: use magit-local-branch-at-point - -* The previous window configuration was not restored by - `magit-log-select-pick' and `magit-log-select-quit'. #3211 - -* When `magit-branch-spinoff' failed to perform the checkout it - never-the-less attempted to perform the subsequent steps. #3210 - -* Jumping to the correct location in a man page failed for many - switches and options. deb482063 ff - -* The default action of `magit-branch-config-popup' was a command that - isn't even available in the popup. eaa836fe2 - -* The command `magit-branch-spinoff' didn't try to prevent the user - from entering a string containing whitespace as a branch name. - bd6055ab2 - -* The command `magit-commit' failed to commit everything after asking - for confirmation if it is called from a subdirectory. #3221 - -* The command `magit-completing-read' didn't offer any completion - candidates. 387257f20 - -* In some cases an error occurred when showing the remote popup because - the length of the remotes name was not taken into account. a9177e5b9 - -* The command `magit-branch-rename' failed to rename a local branch if - a tag existed with the same name. #3222 - -* The command `magit-file-delete' ignored the prefix argument instead - of forcing the action as intended. 0df686bfd - -* Fixed a broken highlighting special case. #3238 - -* When staging all unstaged changes using "s" on "Unstaged changes" - while there also are staged changes, then the user was not asked for - confirmation. #3238 - -* When reverting a commit users are required to edit the revert - message on some platforms but not on others. #3239 - -* In a secondary worktree `magit-git-dir' failed to return a remote - path when the repository is accessed using Tramp. #3228 - -* When the user chose the default offered by `magit-patch-apply', - then that function failed to expand the file-name so that Git would - understand it. ab00c5ba2 - -* The face `magit-graph' was also used for the commit message, which - only was noticeable when the face was customized. It appears that - nobody ever did that. 47e94767b - -* When `magit-branch-read-upstream-first' is nil, then the value - returned by `magit-branch-read-args' was broken. #3268 - -* Fixed encoding of non-ascii filename arguments to git on - `windows-nt' systems. #3250 - -* A bug in `magit-list-active-notes-refs' slowed down - `magit-show-commit'. #3275 - -* The command `magit-worktree-checkout' wasn't able to checkout - arbitrary commits, just refs. #3277 - -* Due to misunderstood `flyspell' implementation details - `git-commit-turn-on-flyspell' did some unnecessary work and made - claims that are not actually true. 24c966082 - -* When the git executable could not be found, then Magit often claimed - that the user was doing something outside of a Git repository - instead. #3310 - -* The command `magit-submodule-add' always used a kludge that is - only needed when using Ido, resulting in a unnecessary removal - of functionality. 5e43377d2 - -* The function `magit-maybe-save-repository-buffers' in some cases - needlessly redisplayed a message. #3319 - -* The branch description was displayed in weird ways in a few places. - d98c44bd7, 9003b85da - -* When stashing untracked files, then the untracked files in - subdirectories were not removed from the working tree. #3334 - -* The command `magit-worktree-delete' failed to delete a worktree when - its directory no longer existed. #3355 - -* A kludge used to work around a bug in Emacs 24 prevented - `magit-copy-buffer-revision' from deactivating the mark. #3352 - -* When visiting the last blob that still had the line at point in a diff, - then that only jumped to the correct line, but not the correct column. - ebe3b5229 - -* For unpopulated modules `magit-list-submodules' showed information - about the super-repository instead. Now such modules are omitted. - 1c4fa9b14 - -* The commands `magit-am-apply-patches' and `magit-am-apply-maildir' - did not work over Tramp because they passed Tramp file names directly - to git. This was fixed in a way that should prevent similar issues - elsewhere. #3368 - -* The function `magit-branch-commit-at-point' preferred tags over - branches, which is a strange default for most callers. f2b318856 - -* The arguments set in the popup were ignored when displaying tags - in refs buffers. ae007a757 - -* When `magit-diff-section-arguments' calls for it, then all - diff-related sections are supposed to be limited to a subdirectory, - but sections listing untracked and tracked files ignored it. #3376 - -* Saving wip refs often failed because `magit-update-ref' used the - refresh cache. e0e1a44f3 - -* Buffers listing repositories using `tabulated-list-mode' did not - preserve point when being refreshed. 2f0302635 - -This release also contains other minor improvements, bug fixes, typo -fixes, and documentation fixes. - -Authors -------- - - 500 Jonas Bernoulli - 26 Kyle Meyer - 15 Phil Sainty - 13 Alexander Gramiak - 13 Noam Postavsky - 7 Sean Allred - 4 Basil L. Contovounesios - 3 Bastian Beischer - 3 Damien Cassou - 3 Štěpán Němec - 2 Bar Magal - 2 Daniel Mai - 2 Matthew Fluet - 1 Chris LaRose - 1 Daniel Gröber - 1 Daniel Kraus - 1 David Ellison - 1 Fritz Stelzer - 1 Jim Blandy - 1 John Mastro - 1 Kenny Ballou - 1 Matthieu Hauglustaine - 1 Matus Goljer - 1 Orivej Desh - 1 Philipp Stephani - 1 Radon Rosborough - 1 Vladimir Panteleev - 1 Wilfred Hughes - 1 Wouter Bolsterlee - 1 Xu Chunyang diff --git a/.config/emacs/lisp/magit/docs/RelNotes/2.12.1.txt b/.config/emacs/lisp/magit/docs/RelNotes/2.12.1.txt deleted file mode 100644 index a7e0971..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/2.12.1.txt +++ /dev/null @@ -1,16 +0,0 @@ -Magit v2.12.1 Release Notes -=========================== - -Fixes since v2.12.0 -------------------- - -* Magit 2.12.0 depended on a non-existent Magit-Popup version. - -* Key bindings in `magit-remote-popup' conflicted. - -Authors -------- - - 8 Jonas Bernoulli - 1 Dean Kariniemi - 1 Phil Sainty diff --git a/.config/emacs/lisp/magit/docs/RelNotes/2.13.0.txt b/.config/emacs/lisp/magit/docs/RelNotes/2.13.0.txt deleted file mode 100644 index 9b93813..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/2.13.0.txt +++ /dev/null @@ -1,122 +0,0 @@ -Magit v2.13.0 Release Notes -=========================== - -Released 2nd June 2018 by Jonas Bernoulli. - -I am pleased to announce the release of Magit version 2.13.0, -representing 166 commits by 18 contributors over two months. - -Also see https://emacsair.me/2018/06/02/magit-2.13. - -Upcoming breaking changes -------------------------- - -* This is the last release to support Emacs 24.4. Going forward at - least Emacs 25.1 is required. - -* This is the last release to support Git 1.9.4. Going forward at - least Git 2.4 is required. - -* Many functions and variables that have been declared obsolete for - a while now are going to be removed after this release. - -All of these changes will happen on "master", the development branch. -Note that the snapshot packages on Melpa are built from that branch. -If you cannot update Emacs and/or Git now, then you should pin Magit -to Melpa-Stable to stick with this release (and bugfix releases) for -the time being. - -Breaking changes ----------------- - -* As announced earlier, the obsolete option `magit-no-confirm-default' - has been removed. #3232 - -Changes since v2.12.0 ---------------------- - -* Augmenting a file- or blob-visiting buffer with blame information - was completely rewritten, making the implementation more robust and - adding many new features. It is now possible blame in order to get - an answer to the question "what commits remove these lines". It is - no longer necessary for the buffer to be put into `read-only-mode', - when displaying blame information. New visualization styles were - added and users can define their own styles. New commands to visit - blobs related to the current chunk were added. - -* Added new command `magit-tag-release'. This is a fairly opinionated - command and its only use to you might be to serve as a template for - your own variant. - -* Added new section inserter `magit-insert-ignored-files', which - could be added to `magit-status-sections-hook'. - -* The mode `global-magit-file-mode' is now enabled by default, making - the `magit-file-popup' available on "C-c M-g". 0ec28b97 - -* Added new commands `magit-log-trace-definition' and - `magit-diff-trace-definition', which show a log with diffs about the - definition at point. #2588 - -* Added new commands `magit-edit-line-commit' and - `magit-diff-edit-hunk-commit', which allow editing the commit that - added the line at point. febe79ba 22b13337 - -* The interactive prompts for the various reset commands now indicate - the branch which is going to be reset. #3438 - -* Added new option `magit-published-branches', providing an additional - safety-net. If you try to modify a commit that has been pushed to - one of these branches already, then you are now being asked whether - you really want to do that. Do not rely on this exclusively, there - are edge-cases that are ambiguous and are not always handled as you - might have expected. add4a7f3 ff - -* Gravatar images are now being inserted asynchronously. #3452 - -* After deleting the current worktree, `magit-delete-worktree' now - shows the status buffer for another worktree. d9cd4611 - -* Added new command `magit-worktree-checkout-pull-request'. a3d788ec - -* New variable `magit-get-previous-branch-timeout' limits the amount - of time spent in `magit-get-previous-branch'. #3457 - -Fixes since v2.12.0 -------------------- - -* The recently added command `magit-branch-pull-request' had various - issues concerning pull-requests referencing branches from the - upstream repository. #3416 #3417 #3461 - -* The values of diffstat sections was wrong for sections that - represent renamed files. 66d9558f - -* Time zones were not handled correctly when calculating times for - blame headings. #3443 - -This release also contains the fixes described in the v2.12.1 release -notes, as well as other minor improvements, bug fixes, typo fixes, and -documentation fixes. - -Authors -------- - - 138 Jonas Bernoulli - 6 Kyle Meyer - 2 Alban Gruin - 2 Basil L. Contovounesios - 2 Buster Copley - 2 Christophe Junke - 2 Mario Rodas - 2 Phil Sainty - 1 Aaron Madlon-Kay - 1 Ben North - 1 Dean Kariniemi - 1 Eli Barzilay - 1 Jon Vanderwijk - 1 Jonathan Leech-Pepin - 1 Justin Guenther - 1 Li-Yun Chang - 1 Marc Sherry - 1 Noam Postavsky diff --git a/.config/emacs/lisp/magit/docs/RelNotes/2.13.1.txt b/.config/emacs/lisp/magit/docs/RelNotes/2.13.1.txt deleted file mode 100644 index 3447dab..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/2.13.1.txt +++ /dev/null @@ -1,34 +0,0 @@ -Magit v2.13.1 Release Notes -=========================== - -Fixes since v2.13.0 -------------------- - -* The prompt used by `magit-rebase-interactive-assert' was wrong. - 37d76f409 - -* `magit-rebase-autosquash' asked for confirmation when the user - already confirmed earlier. 02e6c75b6 - -* `magit-log-wash-rev` errored in ~magit-cherry-mode~, starting with - Emacs 26.1. 1ee577b35 - -* Magit used a completion function to make the built-in completion - respect the collection's order. Even though that wasn't necessary - for Ivy and Helm it did the same here, which became a problem when a - change in Helm caused fuzzy completion to break in combination with - a completion function. Likewise a change in Ivy caused Magit's sort - order to be ignored, which we work around now. #3476, #3477 - -* When using cygwin, then `git-commit-setup-font-lock' could end up - trying to run git in a non-existent directory. #3505 - -* `magit-insert-modules-unpushed-to-pushremote' failed to insert - anything due to a typo in the used commit range. d4e159f35 - -Authors -------- - - 11 Jonas Bernoulli - 8 Kyle Meyer - 5 Noam Postavsky diff --git a/.config/emacs/lisp/magit/docs/RelNotes/2.2.0.txt b/.config/emacs/lisp/magit/docs/RelNotes/2.2.0.txt deleted file mode 100644 index 2b77c4a..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/2.2.0.txt +++ /dev/null @@ -1,219 +0,0 @@ -Magit v2.2.0 Release Notes -========================== - -Released 16 August 2015 by Jonas Bernoulli. - -We are pleased to announce the release of Magit version 2.2.0, -representing 321 commits by 19 people over 6 weeks. - -I would like to thank Kyle Meyer and Noam Postavsky for joining -the developer team and helping me with this release. -- Jonas - -Changes since v2.1.0 --------------------- - -* The Elpa packages `with-editor' and `magit-popup' now depend on the - package `async' and turn on the mode `async-bytecomp-package-mode'. - If available, the mode is turned on even when these packages have - not been installed from an Elpa archive. It is being turned on in - both of these libraries because any one of them might be the first - package from the Magit repository that is being updated. - - It is possible to prevent the mode from being turned on when loading - these libraries by setting `async-bytecomp-allowed-packages' to nil - before loading them. If you do that, then you must mention that you - have done so when reporting a bug (which might therefore be due to - miscompiled files). - - Turning on `async-bytecomp-package-mode' advises `package--compile', - instructing it to compile Magit and its dependencies (as well as - others packages listed in `async-bytecomp-allowed-packages' and - their dependencies) in a separate Emacs instance. - - Unfortunately it is necessary that we do this because when an old - version of a package is already loaded when a new version is being - installed, then the old version sometimes interferes during - compilation of the new version, leading to miscompiled files. - - This usually does not happen very often, but when updating from - Magit v1 to v2 then it is expected, which is why users were - instructed to uninstall the old version before installing v2.1.0. - Unfortunately many users never saw those instructions, so we have - no choice but to use this approach to get rid of miscompiled files. - -* Two new commands have been added to the diff refresh popup that - allow the range of the previous diff to be manipulated. - `magit-diff-flip-revs' swaps the revisions of the range, and - `magit-diff-switch-range-type' toggles between ".." and "..." range - types. - -* The commands `magit-ediff-show-unstaged', `magit-ediff-show-staged', - `magit-ediff-show-commit', and `magit-ediff-show-working-tree' have - been added to the Ediff popup. - -* New option `magit-ediff-dwim-show-on-hunks' controls whether calling - `magit-ediff-dwim' runs a show variant (`magit-ediff-show-unstaged' - or `magit-ediff-show-staged') rather than `magit-ediff-stage' when - point is on an uncommitted hunk. - -* `magit-diff' and `magit-ediff-compare' no longer prompt the user for - confirmation when constructing a range from the last and first - commits selected by a region. A prefix argument can now be used to - specify that the diff is between the second revision and the common - ancestor of both revisions (i.e., the "..." range type is used). - -* `magit-ediff-*' variants now limit file choices to those that have - changed between the revisions of interest. If only one file has - changed, this file is used without prompting. - -* `magit-diff' and `magit-ediff-compare' now consider the location at - point when choosing the default for the prompt, and this default - value usually corresponds with the actions of their DWIM - counterparts. - -* The key in Ediff popup for `magit-ediff-compare' has changed from - "d" to "r" to be consistent with the key in the diff popup for the - similarly behaved `magit-diff`. - -* Entering a single commit for the range to `magit-ediff-compare' now - compares the commit with the working tree (like `magit-diff' and - `git diff') rather than the previous commit. - -* The popup `magit-diff-refresh-popup' and its suffix commands and - helper functions were fixed. Most importantly file arguments and - diff-type arguments are no longer lost when this popup is used - - it only changes those arguments it is supposed to change. Also - the popup only lists the arguments which can actually be used in - the current buffer (in status buffers fewer are supported than in - diff-only buffers). - -* The popup `magit-diff-popup' and its suffix commands now use the - arguments currently in the `magit-diff-mode' buffer of the current - repository. Previously the arguments were always reset to the - default value of `magit-diff-arguments'. - -* The default values of `magit-diff-section-arguments' and - `magit-diff-arguments' now contain the `--no-ext-diff' switch. - -* New popup `magit-log-refresh-popup' allows changing the log - arguments used in the current buffer. This allows changing the - arguments used in a log buffer without having to specify the - reference(s) again. And it makes it possible to change the log - arguments used in the status buffer, which previously required that - option `magit-log-section-arguments' was customized manually. - -* When a log is displayed for the purpose of having the user select - a commit, then this is now displayed in a buffer separate from the - regular log buffer. New option `magit-log-select-buffer-name-format' - controls the name of that buffer and new option - `magit-log-select-arguments' controls the arguments. - -* The default value of `magit-log-section-arguments' now contains the - `--decorate' switch. - -* `magit-log-buffer-file' respects the log arguments currently in - effect in the repositories log buffer, or if that doesn't exist the - default value of `magit-log-arguments'. Because this command is not - invoked from the log popup, it's now also possible to turn on the - `--follow' using a prefix argument. - -* Log graphs are no longer shown in color by default, because turning - the control sequences into faces is very inefficient. To allow - users to get back the colorful graphs, the `--color' switch has been - added to the log popup. - -* In the refs manager, `RET' on a local branch again "visits" that - branch by checking it out (like in v1.4). With a prefix argument it - instead "visits" the branch by showing information about other refs - relative to the visited one (like in v2.1 even without a prefix - argument). - - When the new option `magit-visit-ref-create' is non-nil, then a - remote branch is "visited" by creating a new local branch that - tracks that remote branch, and checking out that local branch. - -* To avoid losing any standard functionality, `C-w' and `M-w' now - fallback to `kill-ring-save' when the region is active. They also - work in more places and in some cases copy more useful information - than before. - -* New option `magit-push-always-verify' has been added because changes - in v2.1 caused many users to accidentally push to `master' instead - of a remote feature branch as intended. All users should set this - option to nil, but only after having read the documentation. The - commands that respect this option instruct users to consult its - documentation. - -* Moving through a log using `n' and `p' is now much faster because - the revision buffer is no longer recreated for each commit along the - way. Because Emacs does not support key-down-events this had to be - implemented using a timer, which has the unfortunate effect that it - leads to a delay even when only pressing one of these keys briefly - to move by a single line. This delay can be adjusted using the new - option `magit-diff-auto-show-delay'. - -* When creating a new branch, first reading the starting point and - only then the name of the new branch has advantages. But many users - disagree, so the option `magit-branch-read-upstream-first' has been - added. It defaults to t. - -* New commands `magit-wip-log' and `magit-wip-log-current' allow - showing log for a branch and its wip refs (which the various wip - modes commit to). - -* New command `magit-submodule-deinit'. - -* New command `magit-commit-augment' allows the user to pick a commit - to squash into and edit the squash commit message. - -* New push commands `magit-push-implicitly' and `magit-push-quickly'. - -* When reading user input, many commands now offer a better default - choice and better completion candidates. - -* All apply variants now use `--3way' when called with a prefix - argument. - -* Log commands now respect the entries in the .mailmap file. - -* The command `magit-pull-current' now also fetches tags by default. - -* When a file has conflicts then the type of conflict is shown now. - -* New option `magit-log-show-refname-after-summary'. - -* New section inserter `magit-insert-user-header'. - -* New face `magit-section-secondary-heading'. - -* New commands `magit-run-gitk-all' and `magit-run-gitk-branches'. - The existing command `magit-run-gitk' now always calls `gitk' - without any arguments. - -* New commands `magit-shell-command' and `magit-shell-command-topdir'. - -This release also contains various documentation fixes, code -clean-ups, bug fixes, and other small to medium improvements. - -Authors -------- - - 225 Jonas Bernoulli - 67 Kyle Meyer - 8 Noam Postavsky - 3 Mitchel Humpherys - 2 Greg Lucas - 2 Mark Karpov - 2 Yuichi Higashi - 1 Johann Klähn - 1 Josiah Schwab - 1 Kan-Ru Chen - 1 Nicklas Lindgren - 1 Phil Sainty - 1 Richard Kim - 1 Robin Green - 1 Rémi Vanicat - 1 Steven Vancoillie - 1 Thomas Frössman - 1 Ting-Yu Lin - 1 Vineet Naik diff --git a/.config/emacs/lisp/magit/docs/RelNotes/2.2.1.txt b/.config/emacs/lisp/magit/docs/RelNotes/2.2.1.txt deleted file mode 100644 index 11771bf..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/2.2.1.txt +++ /dev/null @@ -1,45 +0,0 @@ -Magit v2.2.1 Release Notes -========================== - -Released 24 August 2015 by Jonas Bernoulli. - -This is a bugfix release. - -* The version strings in the manual were not set to "2.2" when v2.2.0 - was released. - -* Some menu bindings were not adjusted when commands were renamed. - -* The "next" tag was never shown in the "Tag(s)" header of the status - buffer. - -* Blaming did not abort gracefully when the user killed the buffer. - -* Blaming failed on indirect buffers. - -* Blaming did not detect when a file was untracked. - -* Blaming passed the wrong line range when the file's buffer was - narrowed. - -* `magit-shell-command-topdir' used `magit-git-command' instead of - `magit-shell-command'. - -* `magit-copy-as-kill' added "nil" to the `kill-ring' when there was - nothing useful to put there. - -* `magit-find-file-hook', `magit-find-index-hook', - `magit-refresh-popup-buffer-hook' were used without being defined - using `defvar'. - -* `magit-format-ref-labels' failed to work around a Git bug, resulting - in refnames not being colorized when `--simplify-by-decoration' is - used. - -This release also contains various documentation fixes. - -Authors -------- - - 16 Jonas Bernoulli - 11 Kyle Meyer diff --git a/.config/emacs/lisp/magit/docs/RelNotes/2.2.2.txt b/.config/emacs/lisp/magit/docs/RelNotes/2.2.2.txt deleted file mode 100644 index 1d5ec52..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/2.2.2.txt +++ /dev/null @@ -1,45 +0,0 @@ -Magit v2.2.2 Release Notes -========================== - -Released 3 September 2015 by Jonas Bernoulli. - -This is a bugfix release. - -* `magit-diff-wash-diff' choked on unmerged binary files. #2211 - -* `magit-blame-popup' did not allow empty input when reading a value - for "-C" or "-M". #2208 - -* The `emacsclient' executables belonging to non-current alternative - installations of Emacs on Debian were not considered when setting - the default value of `with-editor-emacsclient-executable'. #2217 - -* `server-edit', which switches to a buffer preferably one with - another client, was used when finishing or aborting a `with-editor' - session. When `emacsclient' was used to connect to a server and - then a commit or rebase was invoked, then there would be another - client and switching to its buffer after finishing the commit or - rebase would be undesirable. Now we use `server-done' instead. - #2197 - -* When `--stat' abbreviates the name of a file, then that name was - stored in the section object instead of the full name. #2199 - -* `magit-file-relative-name' with non-nil TRACKED failed in Tramp - repositories. #2206 - -* After failing to clone, `magit-clone' also tried to show the status - of the non-existent clone. #2203 - -* `magit-wip-log' did not display a log if the working tree or index - ref did not exist. - -This release also contains various documentation fixes and code -clean-ups. - -Authors -------- - - 29 Jonas Bernoulli - 5 Kyle Meyer - 1 Barak A. Pearlmutter diff --git a/.config/emacs/lisp/magit/docs/RelNotes/2.3.0.txt b/.config/emacs/lisp/magit/docs/RelNotes/2.3.0.txt deleted file mode 100644 index ae09967..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/2.3.0.txt +++ /dev/null @@ -1,251 +0,0 @@ -Magit v2.3.0 Release Notes -========================== - -Released 28 October 2015 by Jonas Bernoulli. - -We are pleased to announce the release of Magit version 2.3.0, -representing 367 commits by 12 people over 10 weeks. - -Changes since v2.2.0 --------------------- - -* Added `--interactive' switch to `magit-rebase-popup' so that rebase - variants which normally perform a non-interactive rebase can be used - to perform an interactive rebase too. #2186 - -* Commands that perform an interactive rebase should no longer be used - non-interactively (i.e., they should only be used as commands). #2187 - -* Rebasing commands now can start with a root commit. Root commits - are detected automatically, so users don't have to use the `--root' - switch explicitly. #2187 - -* Added new command `magit-checkout-file'. - -* Added new option `magit-bury-buffer-function' to give users more - control over how Magit buffers are buried, replacing the old binary - option `magit-restore-window-configuration'. The default is still - the same, i.e., `magit-restore-window-configuration' is used. #2193 - -* Added new function `magit-mode-quit-window' as a simpler variant to - `magit-restore-window-configuration'. #2193 - -* Information about related refs in `magit-revision-mode' buffers are - now grouped in the same section as other headers and are formatted - like those other headers instead of like diffstats. The redundant - header which previously grouped the related refs section is gone. - All headers are inserted by the new `magit-insert-revision-headers' - section inserter. #2216 - -* No longer avoid calling git more than absolutely necessary when - creating a `magit-revision-mode' buffer. This simplifies parsing, - makes it simpler to prettify how information is presented, allows - users to customize how and in what order information is presented, - and prepares for faster, asynchronously created diffs. #2216 - -* The various sections in revision buffers are now inserted using new - section inserters named `magit-insert-revision-{*}', all of which - are part of the default value of `magit-revision-sections-hook'. - #2216 - -* The various sections in diff buffers are now inserted using new - section inserters named `magit-insert-diff-{*}', all of which are - part of the default value of `magit-diff-sections-hook'. #2216 - -* Added new option `magit-revision-headers-format' whose value is - passed to `git show --format=' to insert most of the headers, - excluding the related-refs headers. The default value now uses - placeholders which respect information in the file ".mailmap". - #2216 - -* Removed options `magit-revision-show-notes', - `magit-diff-show-xref-buttons', `magit-revision-show-xref-buttons', - `magit-diff-show-diffstat', and `magit-revision-show-diffstat'. - Whether these sections are inserted is now controlled using the - hooks `magit-diff-section-hook' and `magit-revision-section-hook'. - #2216 - -* Gravatar images can now be shown in `magit-revision-buffers'. New - option `magit-revision-show-gravatars' controls whether these images - should be inserted and can also be used to adjust to customizations - of `magit-revision-headers-format'. - - This feature is not enabled by default due to privacy concerns. - - Gravatar images are spliced into two halves which are then displayed - on separate lines. On OS X the splicing has a bug in some Emacs - builds, which causes the top and bottom halves to be interchanged. - Setting the new option `magit-revision-use-gravatar-kludge' to `t' - works around this issue. #2216 - -* After using the region to stage or discard parts of a hunk, point is - now placed on the beginning of the next or previous block of changed - lines. Previously we just jumped to the beginning of the hunk at - the same index as the previous hunk, but that often was very far - away from where point was before the refresh. #2227 - -* The function `magit-toplevel' was refactored and many tests were - added. It now returns the correct value when a symlink to a - sub-directory of a working tree is involved. #2242 - -* New option `magit-keep-region-overlay' allows displaying the region - overlay together with the visualization of a valid Magit selection. - See the doc-string for why we think you shouldn't do that, but if - you disagree then you can now have it your way. #2091 - -* Avoid the inefficiency of `git log --graph --max-count=N REV' (it - calculates the graph for all reachable commits, not just the N - commits), by additionally limiting the history using a range - calculated from REV and N, when possible. #2243 - -* Renamed `magit-file-buffer-mode' to `magit-file-mode'. Related - symbols were renamed accordingly. - -* Added new minor mode `magit-blob-mode' and new commands - `magit-blob-previous' and `magit-blob-next'. #2195 - -* Added new commands `magit-branch-spinoff' and `magit-branch-reset'. - #2191 - -* Added new option `magit-status-expand-stashes'. - -* In addition to `default-directory' also set `list-buffers-directory' - to the top-level of the working tree in Magit buffers, causing that - directory to be displayed in the "File" column of the *Buffer List* - buffer. - -* Added a kludge to keep Cygwin and MYSYS2 executables from expanding - globs when called from a native Windows Emacs executable. #2281 - -* Added a revision stack. The new commands `magit-copy-section-value' - and `magit-copy-buffer-revision', which are intended for use inside - Magit buffers, push an entry to the stack, and the new command - `magit-pop-revision-stack' inserts a representation into an editable - buffer. New option `magit-pop-revision-stack-format' controls how - the representation of the revision is formatted. The old commands - `magit-copy-as-kill' and `magit-copy-buffer-thing-as-kill' have been - removed. #2225 - -* The default values of options `magit-commit-extend-override-date' - and `magit-commit-extend-override-date' changed to `t'. - -* Added new option `magit-log-show-margin'. - -* Added new option `magit-log-remove-graph-args'. #2226 - -* Added support for showing actionable diffs inside logs. #2226 - -* Added basic support for tracing the evolution of a region. #2226 - -* Added new command `magit-stash-format-patch'. - -* All apply variants learned how to apply multiple hunks at once. #2271 - -* Regular apply learned how to apply multiple files at once. #2271 - -* `git-commit-setup' learned to handle Cygwin paths. It had to be - taught about that separately from the rest of Magit, because, for - historic reasons, we try to keep the `git-commit' package usable - without Magit. - -* The signatures of `magit-mode-setup' and `magit-mode-get-buffer' - have changed, and `magit-mode-get-buffer-create' has been removed. - Extensions have to be adjusted accordingly. #2282. - -* All Magit-Mode buffers (including process buffers, but excluding - popup, blob-visiting, and file-visiting buffers, whose major-modes - do not derive from `magit-mode' and therefore aren't "Magit-Mode - buffers") are now displayed using `magit-display-buffer', which is a - wrapper around the low-level `display-buffer'. High-level functions - such as `pop-to-buffer' and `switch-to-buffer' are no longer used to - display Magit buffers. - - `magit-display-buffer' uses the function specified by the new option - `magit-display-buffer-function' to actually display the buffer in - some window. The default value is `magit-display-buffer-traditional'. - By implementing their own variant to wrap around `display-buffer', - users can take complete control over how Magit buffers are displayed. - It's also possible to use `display-buffer' directly and specify the - display actions in `display-buffer-alist'. - - Added new options `magit-pre-display-buffer-hook' and - `magit-post-display-buffer-hook', and removed the options - `magit-status-buffer-switch-function' and - `magit-diff-switch-buffer-function'. #2282 - -* Added new options `magit-generate-buffer-name-function', - `magit-buffer-name-format', and `magit-uniquify-buffer-names', - replacing the various `magit-{*}-buffer-name-format' options. #2282 - -* Added new command `magit-toggle-buffer-lock'. Previously it was - possible to prevent Magit from reusing an existing buffer to display - something else, using the command `magit-rename-buffer' (which was - removed). Now this is done by locking the buffer to its value. - #2282 - -* The status buffer is now always refreshed after running a Magit - command triggers a refresh. Previously that was only the case if - the buffer in which the command was invoked was a Magit buffer too. - -* Added optional support for refreshing the status buffer every time a - buffer visiting a file, which is tracked in the current repository, - is saved. To enable this add `magit-after-save-refresh-buffers' to - `after-save-hook'. - -* Added new functions `magit-log-maybe-update-revision-buffer', - `magit-log-maybe-update-blob-buffer', - `magit-status-maybe-update-revision-buffer', and - `magit-status-maybe-update-blob-buffer', and added some of them to - `magit-section-movement-hook'. Removed the function - `magit-log-maybe-show-commit', which served about the same purpose - as these new functions. Previously one had to customize the option - `magit-diff-auto-show' to control when the other buffer was updated, - now one does so by adding or removing the above functions to or from - `magit-section-movement-hook'. The other window is only ever - updated now, to initially create it, use `SPC'. #2338 - -* Added new hook `magit-process-find-password-functions', with no - default members. These functions, if any, are run when git requests - a password from the user, if there are no such functions, or if they - fail, then the user has to type the password as before. Added new - function `magit-process-password-auth-source'. It can be added to - that hook and uses `auth-source' to get the password from one of the - sources it supports. #2311 - -* Removed broken support for unicode log graphs. - -* `magit-expand-git-file-name' learned to use the output of `mount' to - map Cygwin paths into native Windows paths. `git-commit-setup' now - uses `magit-expand-git-file-name' if available. #2348 - -* Added new function `magit-define-popup-sequence-action' and taught - related functions about `:sequence-actions'. - -* Added new hook `magit-credential-hook' and added new hook function - `magit-maybe-start-credential-cache-daemon' to it. This allows - starting Git's credential daemon separately, which is necessary - because Emacs sends SIGHUP and closes the pty when e.g `git push' - (which started the daemon) finishes. Upon receiving that signal - the daemon terminates. We work around this by starting the daemon - directly before invoking the git subcommand which might need - credentials. #2360 - -This release also contains the changes described in the v2.2.1 and -v2.2.2 release notes, as well as various other documentation fixes, -code clean-ups, bug fixes, and other small to medium improvements. - -Authors -------- - - 305 Jonas Bernoulli - 38 Kyle Meyer - 15 Noam Postavsky - 1 Andriy Kmit' - 1 Barak A. Pearlmutter - 1 Brian Warner - 1 Damien Cassou - 1 John Mastro - 1 Nicolas Petton - 1 Nikolay Martynov - 1 Peter Jaros - 1 Phil Sainty diff --git a/.config/emacs/lisp/magit/docs/RelNotes/2.3.1.txt b/.config/emacs/lisp/magit/docs/RelNotes/2.3.1.txt deleted file mode 100644 index b1d1291..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/2.3.1.txt +++ /dev/null @@ -1,31 +0,0 @@ -Magit v2.3.1 Release Notes -========================== - -Released 11 November 2015 by Jonas Bernoulli. - -This is a bugfix release. - -* `magit-stash-drop' now shows a message with the hash of the dropped - stash to make it easier to recover from dropping the wrong stash. - -* `magit-revert-buffers' now avoids needlessly connecting to unrelated - hosts. It first checks whether a given file is on the same host as - the repository, and only if that is so it checks whether the file is - located inside the repository, using `file-in-directory-p', which, - for Tramp files, requires connecting to the remote host. - -* `magit-commit-message-buffer' no longer hangs when a symlink to the - repository is involved. - -This release also contains various documentation fixes and code -clean-ups. - -Authors -------- - - 10 Jonas Bernoulli - 3 Noam Postavsky - 2 Kyle Meyer - 1 Carl Lieberman - 1 David L. Rager - 1 Syohei Yoshida diff --git a/.config/emacs/lisp/magit/docs/RelNotes/2.4.0.txt b/.config/emacs/lisp/magit/docs/RelNotes/2.4.0.txt deleted file mode 100644 index bedd075..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/2.4.0.txt +++ /dev/null @@ -1,147 +0,0 @@ -Magit v2.4.0 Release Notes -========================== - -Released 18 January 2016 by Jonas Bernoulli. - -We are pleased to announce the release of Magit version 2.4.0, -representing 269 commits by 14 people over 12 weeks. - -Also see http://emacsair.me/2016/01/18/magit-2.4. - -Changes since v2.3.0 --------------------- - -* The new mode `magit-auto-revert-mode', a magit-specific globalized - variant of `auto-revert-mode', replaces the old implementation, which - was configured using the option `magit-revert-buffers'. The new mode - is enabled for all users by default. It may be disabled before - loading magit by setting `magit-auto-revert-mode' (or the obsolete - alias `magit-revert-buffers') to nil. To disable the mode after - loading magit, a call to (magit-auto-revert-mode -1) is required. - #2474 - -* The option `magit-refresh-status-buffer' was added, allowing users - to prevent automatic refreshes of the status buffer for performance - reasons. - -* All of Git's push-related variables are now honored. #2414 - -* In addition to the upstream branch, the push-remote (configured - using `branch..pushRemote' or `remote.pushDefault') is now - also fully supported. #2414 - -* The status buffer now features up to four logs listing unpulled and - unpushed commits. Two for the upstream and two for the push-remote. - #2414 - -* The branch popup now shows the most important Git variables that are - in some way related to branches. The values of these variables can - now be conveniently changed from that popup. #2414 - -* The fetch, pull, push, and rebase popups now feature an action which - acts on the push-remote, another which acts on the upstream, and yet - another which acts on any other source or target. For each of these - actions the respective branch is shown in the popup. - - The actions in the push popup are displayed even if the respective - variables are unset - they then offer to set these variables before - pushing. Setting `magit-push-current-set-remote-if-missing' to nil - disables this. - - Many key bindings were changed for consistency and safety reasons. - Likewise many commands were renamed and their behavior was adjusted. - Some new commands, related to the push-remote, were added. #2414 - -* The command `magit-push-implicitly' was removed from the push popup. - The command's doc-string explains how to put it back. If these - instructions are followed, then the popup shows what will happen if - the command is used. #2453 - -* The command `magit-push-to-remote' was added. The command's - doc-string explains how to add it to the push popup. #2453 - -* The option `magit-push-always-verify' was removed. That was only a - temporary kludge to keep users from shooting themselves in the foot. - This is no longer necessary because one now always sees where one is - about to push to. #2414 - -* The popup command `magit-pull-and-fetch-popup' was added as a - possible replacement for the separate `magit-push-popup' and - `magit-fetch-popup'. #2452 - -* The option `magit-branch-prefer-remote-upstream' was added for users - who prefer to always use remote branches as upstreams. #2447 - -* The options `magit-clone-set-remote.pushDefault' and - `magit-remote-add-set-remote.pushDefault' were added. #2447 - -* When Git is run for side-effects and exits with a non-zero status, - then the respective error message is now inserted into the status - buffer. This should help those users who do not see that message - when it is being displayed in the echo area. - -* Popups gained support for a new event type `:variable', which can be - used to change the value of Git variables. This can only be used in - combination with Magit (just `magit-popup.el' by itself is not - sufficient). #2409 - -* The backward-compatibility kludge `magit-branch-manager' has been - removed. The one and only binding to show the refs buffer now is - "y"; the "b v" binding has been removed. - -* The command `with-editor-finish' now runs the new hook - `with-editor-post-finish-hook'. - -* The command `magit-diff-visit-file' now runs the new hook - `magit-diff-visit-file-hook'. - -* When the upstream branch or push remote is configured but the - respective branch does not actually exist, then that is now reported - in the header of the status buffer. #2390 - -* The header line about the upstream branch in the status buffer is - now prefixed with either "Merge" or "Rebase", depending on the value - of `branch..rebase'. #2390 - -* `magit-define-popup' learned two new arguments, `:setup-function' and - `:refresh-function'. These arguments should be used instead of the - MODE argument, which is now deprecated. #2389 - -* Negative text properties are no longer faked; that was just too ugly - and inefficient. Since v2.1.0 Magit no longer sets the background - color for any faces except for those related to diffs. Third-party - themes which still set the background color of non-diff faces have - to be adjusted, because the background color of these faces would be - shadowed by the highlighting of the current section. This does not - apply to diff-related faces because diff sections are highlighted - differently from other sections. #2387 - -* The commands `git-rebase-move-line-up' and `git-rebase-move-line-down' - have been extended. When a region is active, they now operate on - all lines touched by the region, not just the current line. In - addition, a numeric prefix can now be given to specify how many - lines the current line or selection is moved across. - -* The option `magit-popup-display-action' was added. - -This release also contains the changes described in the v2.3.1 release -notes, as well as various other documentation fixes, code clean-ups, -bug fixes, and other small to medium improvements. - -Authors -------- - - 226 Jonas Bernoulli - 22 Kyle Meyer - 10 Noam Postavsky - 1 Carl Lieberman - 1 Damien Cassou - 1 David L. Rager - 1 John Mastro - 1 Lele Gaifax - 1 Michael Heerdegen - 1 Miloš Mošić - 1 Raimon Grau - 1 Sylvain Rousseau - 1 Syohei Yoshida - 1 Zach Latta diff --git a/.config/emacs/lisp/magit/docs/RelNotes/2.4.1.txt b/.config/emacs/lisp/magit/docs/RelNotes/2.4.1.txt deleted file mode 100644 index 872a6df..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/2.4.1.txt +++ /dev/null @@ -1,31 +0,0 @@ -Magit v2.4.1 Release Notes -========================== - -Updates since v2.4.0 --------------------- - -* Added new utility functions `magit-rev-abbrev', `magit-ref-p', and - `magit-tag-p'. - -Fixes since v2.4.0 ------------------- - -* When determining the emacsclient executable most suitable for the - current emacs instance, With-Editor ignored any executable that is - actually named "emacsclient-snapshot". - -* When determining the most suitable git executable, an error occurred - if "Git for Windows 1.x" is used and an cygpath executable is - available. - -* An error occurred when refreshing the status buffer when there is a - new, staged but not yet committed, submodule. - -This release also contains typofixes. - -Authors -------- - - 9 Jonas Bernoulli - 4 Kyle Meyer - 1 Noam Postavsky diff --git a/.config/emacs/lisp/magit/docs/RelNotes/2.5.0.txt b/.config/emacs/lisp/magit/docs/RelNotes/2.5.0.txt deleted file mode 100644 index cce9fed..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/2.5.0.txt +++ /dev/null @@ -1,122 +0,0 @@ -Magit v2.5.0 Release Notes -========================== - -Released 30 January 2016 by Jonas Bernoulli. - -We are pleased to announce the release of Magit version 2.5.0, -representing 78 commits by 4 contributors over 2 weeks. - -Also see http://emacsair.me/2016/02/10/magit-2.5. - -Changes since v2.4.0 --------------------- - -* The library `with-editor.el' reincarnated as a separate repository. - - It was already available as a separate package, and since it can be - of use for packages that have absolutely nothing to do with `magit' - it makes sense to maintain it separately. That wasn't done before - because that would have made it harder to change it and its users - within the magit repository in parallel. I expect there will be - few such changes in the future. - -* Added new library `magit-submodule.el'. It contains code that was - previously spread across various libraries. - -* Added new option `auto-revert-buffer-list-filter' and redefined - `auto-revert-buffers' from `autorevert.el' to use it. Added new - predicates `magit-auto-revert-buffer-p' and the more restrictive - `magit-auto-revert-repository-buffer-p', which are both intended - to be used as potential value of the option. - - For now the option defaults to `nil', but that might change in a - future release. When Magit explicitly calls `auto-revert-buffers' - (as opposed to when that is called due to a file notification event - or by a timer), and `auto-revert-buffer-list-filter' is `nil', then - it is let-bound to `magit-auto-revert-repository-buffer-p'. - - Users who use Tramp and experience delays, should consider setting - the option to `magit-auto-revert-repository-buffer-p'. - -* By default, invoking `magit-unstage' on a committed change now - performs an action which is somewhat similar to unstaging. The - change is reverted in the index, but not the working tree. This - allows extracting changes from HEAD. - - Setting the new option `magit-unstage-committed' to nil, disables - this behavior. Attempting to unstage a committed change would then - result in an error again. - -* Because file notifications may arrive with a delay, the option - `magit-auto-revert-immediately' now defaults to `t' even when file - notifications can be used, - -* Like `magit-refresh' already did, `magit-refresh-all' now runs the - hooks `magit-pre-refresh-hook' and `magit-post-refresh-hook'. - -* The heading of the section which lists commits that exist in the - current branch but not in its upstream was changed from "Unpushed - to " to "Unmerged into ", because one usually - should merge into that branch instead of pushing to it. - -* Added new commands `magit-remote-set-head' and - `magit-remote-unset-head'. - -* By default `magit-clone' now deletes the symbolic-ref "origin/HEAD" - right after running `git clone', which insists on creating it. - - The new option `magit-clone-set-remote-head' can be set to `t' to - go back to keeping that symbolic-ref. We default to removing it, - because it does not actually get automatically updated when the - HEAD of the remote changes, which makes it rather pointless. - -* Added new option `magit-prefer-remote-upstream' which controls - whether commands which read the upstream or starting-point from - the user would rather offer a local or a remote branch as default - completion candidate. - -* Added the switch `--cover-letter' to `magit-patch-popup', and taught - `magit-format-patch' to immediately open the letter in a buffer. - -* Added new option `++order' to the various log popups. This option - and its value are converted to `--VALUE-order' before calling `git'. - This option was added instead of the switches `--author-date-order', - `--date-order', and `--topo-order' because adding all three would be - too noisy and because they are mutually exclusive. - -Fixes since v2.4.1 ------------------- - -* Creating a stash in a secondary working tree failed if no other - stash already existed in the repository. - -* Creating a Magit buffer failed if `uniquify-buffer-name-style's - value is `nil'. - -* Resetting a branch to an arbitrary commit caused its upstream - configuration to be mangled. - -* Resetting a branch to another branch caused the former to be - configured as the upstream of the latter. That behavior was - introduced by accident when the argument `--track' was replaced with - the variable `branch.autoSetupMerge' in the popup. Because it would - be undesirable to restore the `--track' argument in the popup, one - now has to use a prefix argument to set the upstream while resetting. - -* The manually set state of the margin in log and reflog buffers was - not preserved and instead reset to the default state when a command - was invoked which changes what log/reflog is being displayed. - -* Pressing RET on a variable in a popup caused an error. - -This release also contains the fixes described in the v2.4.1 release -notes, as well as various typofixes, documentation updates, code -clean-ups, bug fixes, and other small improvements. - -Authors -------- - - 62 Jonas Bernoulli - 9 Kyle Meyer - 4 Noam Postavsky - 3 Alex Dunn diff --git a/.config/emacs/lisp/magit/docs/RelNotes/2.6.0.txt b/.config/emacs/lisp/magit/docs/RelNotes/2.6.0.txt deleted file mode 100644 index c58fdc2..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/2.6.0.txt +++ /dev/null @@ -1,134 +0,0 @@ -Magit v2.6.0 Release Notes -========================== - -Released 29 March 2016 by Jonas Bernoulli. - -We are pleased to announce the release of Magit version 2.6.0, -representing 77 commits by 7 contributors over 2 months. - -Also see http://emacsair.me/2016/03/29/magit-2.6. - -Updates since v2.5.0 --------------------- - -* Added a cache, which memorizes the values of some function calls for - the duration of a refresh. This cuts the calls to git in half. - -* Added new option `magit-diff-hide-trailing-cr-characters'. When its - value is non-nil (the default on Windows), then ^M characters at the - end of diff lines are hidden. - -* Added new command `magit-diff-buffer-file-popup' intended for use in - file-visiting buffers. It shows the same popup as `magit-diff-popup' - but starts out already limited to the visited file. - -* Added new command `magit-ediff-show-stash', which is available in - the Ediff popup and will be used when `magit-ediff-dwim' is called - with point on a stash. - -* Added new command `magit-reset-popup' featuring all the available - reset variants. - -* Added new command `magit-push-refspecs', which allows pushing using - one or more comma-separated and refspecs, which are explicitly typed - in the minibuffer. - -* Added new commands `magit-fetch-refspec' and `magit-fetch-branch'. - -* Added new section inserters - `magit-insert-modules-unpulled-from-pushremote' and - `magit-insert-modules-unpushed-to-pushremote', and renamed - `magit-insert-unpulled-module-commits' to - `magit-insert-modules-unpulled-from-upstream' and - `magit-insert-unpushed-module-commits' to - `magit-insert-modules-unpushed-to-upstream'. - -* The command `magit-submodule-add' now allows using a module name - different from the path of the module. - -* If `magit-push-current-set-remote-if-missing's value is `default', - then the command `magit-push-current-to-pushremote' now offers to - set `remote.pushDefault' unless the push-remote is already set in - some way. Previously this command offered to set the local value - `branch.NAME.pushRemote' for all non-nil values of the option. - -* When washing the diff that is to be displayed while writing a - commit message takes too long, then it is now possible to abort that - by pressing `C-g'. Previously that would have aborted the commit. - -* When `magit-process-raise-error' is non-nil, then the displayed - error message now also mentions the `default-directory', which is - useful when using Magit as a library in another packages that runs - git in many different repositories. - -* The `magit-insert-section' macro's TYPE argument can now have the - form `(eval FORM)' instead of a symbol. An atomic TYPE is never - evaluated, but FORM is evaluated at run-time. - -Fixes since v2.5.0 ------------------- - -* Staging hunks/regions belonging to files with CRLF line endings on - Windows (or, to be precise, when `default-process-coding-system' had - CRLF end-of-line conversion) ended up erroneously staging changes - with LF line endings. Magit now ensures line endings are preserved - by enforcing a `process-coding-system' with LF end-of-line - conversion. The new behavior may be disabled by setting the option - `magit-process-ensure-unix-line-ending' to `nil'. - -* If the user sets the variable `magit-auto-revert-mode' or the - obsolete alias `magit-revert-buffers' to nil anytime during startup - (before or after `magit-autorevert' is loaded) then the mode is now - no longer turned on (actually it is explicitly turned off). - -* When a revision buffer was limited to a set of files, its header - line did not say so. - -* The function `magit-run-git-with-input' had stopped calling - `magit-pre-call-git-hook' and logging its git command to the - magit-process buffer. - -* The function `magit-diff-wash-submodule did not handle some less - common cases. - -* The command `magit-section-cycle-diffs' hung when hiding sections. - -* Invoking `magit-commit-popup's default action by invoking the popup - command with a prefix argument failed due to a typo. - -* The command `magit-toggle-buffer-lock' failed if another buffer is - already locked to the same value. - -* The command `magit-clone' did not switch to the cloned repository - before trying to delete the symbolic-ref "origin/HEAD". - -* The commands `magit-insert-unpulled-from-pushremote' and - `magit-insert-unpushed-to-pushremote' missed an edge case when - checking whether their section should be inserted into the status - buffer. - -* The command `magit-merge-preview' did not recognize sections for - added or deleted files. - -* The command `magit-show-stash' did not properly handle untracked - files that were within subdirectories. - -* On `windows-nt' systems, having `mount' in `exec-path' caused Magit - to assume that git is from Cygwin. - -* Added a kludge to work around a bug in Apple's OS X which causes - `file-accessible-directory-p' to return incorrect results. - -This release also contains typofixes, documentation updates, and code -clean-ups. - -Authors -------- - - 53 Jonas Bernoulli - 13 Kyle Meyer - 4 Luís Oliveira - 4 Noam Postavsky - 1 Dan Erikson - 1 Dato Simó - 1 Russell Black diff --git a/.config/emacs/lisp/magit/docs/RelNotes/2.6.1.txt b/.config/emacs/lisp/magit/docs/RelNotes/2.6.1.txt deleted file mode 100644 index 075f1c0..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/2.6.1.txt +++ /dev/null @@ -1,40 +0,0 @@ -Magit v2.6.1 Release Notes -========================== - -Fixes since v2.6.0 ------------------- - -* When a submodule is manually removed without staging the removal, - then the status buffer could no longer be updated. - -* In some cases not all modified submodules were shown in the status - buffer. - -* Visiting a blob did turn on `diff-hl-mode' if the global mode is on. - -* Stash and wipref were needlessly signed if signing is enabled. - -* The command `git-commit-save-message' did not strip diffs produced - by `git commit --verbose'. - -* Diffs produced by `git commit --verbose' were not completely - highlighted in the commit message buffer. - -* When the commit message buffer contains nothing but a single line - that does not end with a newline, then a warning was shown about - there being a non-empty second line. - -* When installing from Melpa, `async-bytecomp-package-mode' was no - longer activated early enough. - -This release also contains documentation updates, typofixes, fixes for -minor bugs, and other small improvements. - -Authors -------- - - 14 Jonas Bernoulli - 5 Kyle Meyer - 1 Fritz Grabo - 1 Ingo Lohmar - 1 Noam Postavsky diff --git a/.config/emacs/lisp/magit/docs/RelNotes/2.6.2.txt b/.config/emacs/lisp/magit/docs/RelNotes/2.6.2.txt deleted file mode 100644 index 9433128..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/2.6.2.txt +++ /dev/null @@ -1,52 +0,0 @@ -Magit v2.6.2 Release Notes -========================== - -Changes since v2.6.1 --------------------- - -* Added new section inserter `magit-insert-submodules'. For each - submodule it inserts the module path and a description of its tip. - -* When re-adding an already configured but for some reason unstaged - submodule, then `magit-submodule-add' now offers the configured - submodule name as default choice. - -Fixes since v2.6.1 ------------------- - -* When possible `git merge (--no-commit|--edit)' perform fast-forward - merges, which isn't what one would expect. `magit-merge-nocommit' - and `magit-merge-editmsg' now work around that by always using - `--no-ff'. - -* The command `magit-log', when called with `--patch' but without - `--graph', deleted the first two characters of file names in the - diff. - -* When performing an instant fixup/squash, the rebase often failed - because the commit process still held the lock on `index.lock'. - -* The command `magit-submodule-add' offered an invalid default choice - for the module path and allowed selecting a file that isn't a - repository. - -* `git-rebase-mode' failed to prevent `save-place-mode' from having an - effect. - -* The section inserter `magit-insert-unpulled-from-upstream-or-recent' - failed to insert the recent commits instead when no upstream is - configured. - -* Two key bindings in `magit-pull-and-fetch-popup' conflicted. - -* The default value for `magit-cygwin-mount-points' checked if - "git.exe" was a cygwin flavor of git, instead of the (possibly user - customized) value of `magit-git-executable'. - -Authors -------- - - 21 Jonas Bernoulli - 1 John Mastro - 1 Kyle Meyer - 1 Noam Postavsky diff --git a/.config/emacs/lisp/magit/docs/RelNotes/2.7.0.txt b/.config/emacs/lisp/magit/docs/RelNotes/2.7.0.txt deleted file mode 100644 index 74c6ce9..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/2.7.0.txt +++ /dev/null @@ -1,81 +0,0 @@ -Magit v2.7.0 Release Notes -========================== - -Released 19 May 2016 by Jonas Bernoulli. - -We are pleased to announce the release of Magit version 2.7.0, -representing 116 commits by 7 people over 7 weeks. - -Also see http://emacsair.me/2016/05/19/magit-2.7. - -Changes since v2.6.0 --------------------- - -* Added new popup `magit-subtree-popup' and bound "O" to it. - -* Added new popup `magit-branch-config-popup' and made it available - from the popups `magit-branch-popup', `magit-pull-and-fetch-popup', - `magit-pull-popup', `magit-fetch-popup', and `magit-push-popup'. - - With a prefix argument it reads a branch to be configured in the - minibuffer instead of using the current branch. - -* Added new option `magit-branch-popup-show-variables', defaulting to - t to avoid changing key bindings. When set to nil, no variables are - displayed directly in the `magit-branch-popup', instead the subpopup - `magit-branch-config-popup' has to be used. - -* Added new popup command `magit-log-buffer-file-popup'. - -* Added new command `magit-diff-buffer-file' and new option - `magit-diff-buffer-file-locked'. When the value of the option is - non-nil, the default, then the command uses a dedicated buffer. - -* Added new option `magit-log-buffer-file-locked'. When its value is - non-nil, the default, then `magit-log-buffer-file' uses a dedicated - buffer. - -* Added new commands `magit-worktree-checkout', - `magit-worktree-branch', `magit-worktree-delete', - and `magit-worktree-status'. - -* Added new section inserter `magit-insert-worktrees' - -* The command `magit-clone' now runs asynchronously, which avoids - blocking Emacs and allows handling password prompts. - -* The command `magit-stage' learned to stage an untracked file while - leaving its content unstaged (i.e., `git add --intent-to-add') when - called with a prefix argument. - -* The command `magit-reverse' learned to use `--reject' to ensure that - non-conflicting hunks are applied and that conflicting hunks are put - into reject files. - -* When the command `magit-discard' is used on staged changes, then - that is done by first reversing the changes in the index and then in - the working tree. The second step could fail due to conflicts. Now - the `--reject' argument is used, which ensures that non-conflicting - hunks are applied and that conflicting hunks are put into reject - files. - -* The command `magit-rebase-continue' learned to reuse the old commit - message as-is when called with a prefix argument. - -* In the refs buffer symbolic refs, such as "remotes/origin/HEAD", are - no longer omitted from the lists of local and remote branches. - -This release also contains the fixes described in the v2.6.1 and -v2.6.2 release notes, as well as various other documentation fixes, -code clean-ups, bug fixes, and other small to medium improvements. - -Authors -------- - - 95 Jonas Bernoulli - 10 Kyle Meyer - 7 Noam Postavsky - 1 Bart Bakker - 1 Fritz Grabo - 1 Ingo Lohmar - 1 John Mastro diff --git a/.config/emacs/lisp/magit/docs/RelNotes/2.8.0.txt b/.config/emacs/lisp/magit/docs/RelNotes/2.8.0.txt deleted file mode 100644 index 2ca6b70..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/2.8.0.txt +++ /dev/null @@ -1,128 +0,0 @@ -Magit v2.8.0 Release Notes -========================== - -Released 21 August 2016 by Jonas Bernoulli. - -We are pleased to announce the release of Magit version 2.8.0, -representing 124 commits by 11 people over 3 months. - -Also see http://emacsair.me/2016/08/21/magit-2.8. - -Changes since v2.7.0 --------------------- - -* Added several new functions that are suitable values for - `magit-display-buffer-function': - `magit-display-buffer-same-window-except-diff-v1', - `magit-display-buffer-fullframe-status-v1', - `magit-display-buffer-fullframe-status-topleft-v1', and - `magit-display-buffer-fullcolumn-most-v1'. - -* Added new commands `magit-list-repositories' and related new option - `magit-repolist-columns'. - -* Added new commands `magit-list-submodules and related new option - `magit-submodule-list-columns'. - -* Added new command `magit-branch-orphan'. - -* Added new command `magit-log-move-to-parent'. - -* Added support for globbing in file arguments of diff and log - commands. - -* Added support for showing and copying bad commit identified by git - bisect. - -* Added new option `magit-log-output-coding-system'. - -* Added new option `magit-no-message', which can be used to suppress - certain messages whose usefulness are being disputed. - -* Taught `magit-find-file-noselect' and `magit-find-index-noselect' to - use Emacs' encoding detection, and enable `revert-buffer' to work in - those buffers. This makes `magit-ediff-*' commands more useful for - files with non-standard encoding. - -* Taught `magit-insert-bisect-rest' to show the log graph by default. - The new option `magit-bisect-show-graph' controls this. - -* Taught `magit-insert-submodules' to display more information. - -* When a refresh causes the previously current hunk section to - disappear, which happens when it was applied in some way, then we - attempt to move to a sibling hunk. When that succeeds, then that is - now considered a proper move and `magit-section-movement-hook' is - called, which in turn may cause the current hunk to be recentered. - -* In addition to the directory, each member of the value of option - `magit-repository-directories' can now specify the depth to look for - repositories inside that directory, overriding the default depth - specified using the option `magit-repository-directories-depth'. - -* Blob visiting buffers can now be reverted, which is useful when they - visit a reference. - -* Command `magit-stage' can now be used outside of Magit buffers. - -* Commands that read a branch or commit from the user now also offer - tags as completion candidates. - -* Taught `magit-insert-worktrees' to use relative filenames. - -Fixes since v2.7.0 ------------------- - -* Function `magit-get-all' did split multi-line values into multiple - values. - -* Function `magit-subtree-read-prefix' which is used in order to read - the `--prefix' argument from the subtree popup was missing. - -* Command `magit-blame' failed when run in a blob buffer for a file - located in a subdirectory. - -* Command `magit-diff-visit-file' didn't visit a blob when called - inside a `magit-stash-mode' buffer. - -* Command `magit-submodule-add' did not allow picking a path that - does not exist yet and read the path before the url. - -* Command `magit-submodule-setup' did update existing modules, which - can cause them to become detached. - -* Command `magit-popup-describe-function' could create an extra window - on wide frames. - -* Commands `magit-diff-show-or-scroll-{up,down}' failed to scroll - stash buffers. - -* Mode `git-rebase-mode' did not respect the Git variable - `core.commentChar'. - -* Sections in the process buffer sometimes had invalid parent - sections, causing movement and visibility commands to fail, and - expected Git errors not to be handled gracefully in some cases. - -* Merges where not performed asynchronously, which made it impossible - to read a passphrase from the user, needed for commit signing. - -* In bare repositories tracked files were listed as deleted. - -This release also contains typofixes, documentation updates, code -clean-ups, bug fixes, and other small to medium improvements. - -Authors -------- - - 59 Jonas Bernoulli - 33 Noam Postavsky - 23 Kyle Meyer - 2 Mario Rodas - 1 Andriy Kmit' - 1 Basil L. Contovounesios - 1 Chris Shoemaker - 1 Ivan Brennan - 1 Laverne Schrock - 1 Samuel W. Flint - 1 Wilfred Hughes diff --git a/.config/emacs/lisp/magit/docs/RelNotes/2.9.0.txt b/.config/emacs/lisp/magit/docs/RelNotes/2.9.0.txt deleted file mode 100644 index d7fa73c..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/2.9.0.txt +++ /dev/null @@ -1,437 +0,0 @@ -Magit v2.9.0 Release Notes -========================== - -Released 7 December 2016 by Jonas Bernoulli. - -We are pleased to announce the release of Magit version 2.9.0, -representing 250 commits by 18 people over 15 weeks. - -Also see https://emacsair.me/2016/12/07/magit-2.9. - -Breaking changes since v2.8.0 ------------------------------ - -* For historic reasons "RET" behaved differently in `magit-refs-mode' - than anywhere else. "RET" is one of Magit's most essential key - bindings and users quickly learn that regardless of what is actually - at point, it always shows more information about that thing in - another buffer. It can be very confusing if the references buffer - breaks this convention. - - Now `magit-visit-ref' behaves just like `magit-show-commit' even in - `magit-refs-mode' buffers. By default at least; you can easily - revert this change using: - - (setq magit-visit-ref-behavior '(checkout-any focus-on-ref)) - - However we recommend that you instead press "b b RET" to checkout - the reference at point, just like you always had to do in other - buffers. And "C-u y o RET" to make commit counts and lists of - cherries commits relative to the reference at point. - - Furthermore the option `magit-visit-ref-create' was removed. If you - previously had that set to `t', then you can achieve the same using: - - (add-to-list 'magit-visit-ref-behavior 'create-branch) - - However we recommend that you instead press "b c RET RET", just like - you always had to do in other buffers. #2868 - -* The option `magit-popup-show-common-commands' now defaults to `nil'. - - This was done to make popups less noisy but increases the odds - that some users will never become aware of the common commands. - To counter that, the usage instructions displayed in the echo area - now also mention the key that can be used to show these commands - temporarily. #2868 - - You can easily revert this change using: - - (setq magit-popup-show-common-commands t) - -* The option `magit-popup-use-prefix-argument' defaults to `default' - now, meaning that the use of a prefix argument causes the popup's - default action to be invoked directly without the popup being shown - first. - - Previously the use of a prefix argument did not invoke the popup - or its default action, and instead informed users that they had to - choose what behavior they wanted and that they had to set the option - accordingly. Doing that was necessary three years ago, when the - default behavior changed when "magit-key-mode.el" was replaced with - "magit-popup.el". Now we don't need that safety net anymore. #2868 - -* If, and only if, point is on a removed line in a diff, then "RET" - now jumps to the last commit which still had that line, not the - commit which removed that line. Staged changes are excluded from - this new behavior because in that case it seems favorable to always - visit the file in the working tree to make further changes. #2755 - - You can easily revert this change using: - - (setq magit-diff-visit-previous-blob nil) - -* The margin that by default is displayed in pure log buffers and - optionally in some other buffers that contain logs is now more - flexible and easier to customize and to change on the fly. - - The popup that "L" is bound to now features three commands that - for changing the appearance of the margin: `magit-toggle-margin', - `magit-toggle-margin-details' and `magit-cycle-margin-style'. - - The binding for `magit-toggle-margin' has changed from "L t" to the - simpler "L L". You can easily revert this change using: - - (magit-change-popup-key 'magit-log-refresh-popup :action ?L ?t) - (magit-change-popup-key 'magit-margin-popup :action ?L ?t) - - For each mode that supports the margin there now exists a dedicated - option named `magit-*-margin', which controls whether the margin is - shown initially, whether the author name is displayed in addition - to the committer date, and how that committer date is formatted. - All of these options can be found in the new `magit-margin' Custom - group. - - It is now possible to show the actual committer date, using a time - format of your choosing. Previously the only option was to display - the age of the commit. - - The old options that were previously used to configure the margin - have been removed. If you have customized `magit-log-show-margin', - `magit-reflog-show-margin' and/or `magit-refs-show-margin', then you - now have to customize the respective new variable whose names do not - contain "-show". The same applies if you have previously changed - the value of `magit-log-margin-spec'. Unfortunately this cannot be - automated because the format of the values has changed and because - the old customizations do not unambiguously map to the new options. - - You might also want to customize the options `magit-status-margin', - `magit-stashes-margin' and `magit-log-select-margin', for all of - which no corresponding `magit-*-show-margin' used to exist. Another - new option is `magit-refs-margin-for-tags'. - - If you choose to display the commit dates instead of the commit - ages in all supported modes, then you should set `magit-log-margin' - before loading `magit'. If you do that then the default values of - the other `magit-*-margin' options will use the same commit date - style without you having to customize each option individually. - #2885, #2792 - -* By default Git-Commit no longer complains about a summary line that - is too long by some standards. You can easily revert this change - using: 2f115d51 - - (add-to-list 'git-commit-style-convention-checks - 'overlong-summary-line) - -* In buffers used to write commit messages `fill-column' is no longer - set to 72. Instead the default value 70 is used (or whatever local - or global value is set up through other means). You can easily - revert this change using: #2848, #2852 - - (setq git-commit-fill-column 72) - -* When it takes too long to parse diffs, then Magit used to stop - expanding diff sections after one second. This was a constant - source of confusion and one second is a very long time anyway, so - this did not really help hiding the slowness, so this kludge was - effectively dropped. You can easily revert this change using: - - (setq magit-diff-expansion-threshold 1.0) - - By the way, improving performance will soon be a priority again. - #2886 - -Changes since v2.8.0 --------------------- - -* Magit has a new shiny logo! It was created by Dmitriy A. from - Prospect One. Thanks a lot! https://prospectone.io/portfolio/magit - -* The new option `magit-branch-adjust-remote-upstream-alist' can be - used to configure what branch to use as upstream when branching a - remote branch. Without setting this option the upstream ends up - being the same branch as the one referred to by the push-remote. - 85c3053d - -* The per-refresh cache, which is used to save calls to git because - that is surprisingly slow on Windows, has been improved for calls to - `git config'. Instead of just avoiding identical calls to `git - config' as for other sub-commands, we now call `git config --list' - only once per refresh to obtain a list of all variables and their - values. #2743 - -* When visiting a file or blob buffer by pressing "RET" while point is - inside a diff, then the position this jumps to is now accurate (even - when jumping to the file in the working tree from a diff that wasn't - about changes in the working tree). #2828 - -* When visiting a file or blob buffer by pressing "RET" while point is - inside a diff, then the buffer may be widened but only if necessary. - If it isn't necessary to widen the buffer to jump to the appropriate - location, because that position falls into the narrowed region, then - that the buffer isn't widened. #2804, #2818 - -* Hunk refinement is now faster. Users who previously set - `magit-diff-refine-hunk' to `nil' due to performance issues may - find that it now works well even when set to `all'. #2834 - -* The new options `magit-diff-highlight-hunk-region-functions' and - `magit-diff-unmarked-lines-keep-foreground' (which was previously - defined as an undocumented variable) allow tuning the appearance - of the hunk-internal region. - - The new function `magit-diff-highlight-hunk-region-using-face', - provides a new style; it makes the hunk-internal region bold (or - italic). I recommend you customize the above option to use this - function instead of one of the functions mentioned below. - - The new functions `magit-diff-highlight-hunk-region-using-overlays' - and `magit-diff-highlight-hunk-region-using-underline' draw one-pixel - lines before and after the hunk-internal region. Both of these - functions have (different) glitches and due to limitations of Emacs' - display engine it is not possible to fix those. #2293, #2758, #2791 - -* Added command `magit-find-git-config-file' and variants to make it - easier to open a file located in the git directory when ".git" is - a regular file whose contents describe the location of the real git - directory. 8664223c - -* Added command `magit-emacs-Q-command' to make troubleshooting and - bug reporting easier for users not installing from the git - repository. #2856 - -* The command `magit-branch-spinoff' learned to remove only a subset - of commits from the previously current branch, instead of resetting - it to its upstream, when the region selects commits reachable from - HEAD. 1e652b87 - -* The command `magit-branch-delete' now falls back to deleting the - tracking branch when the user attempts to delete a remote branch - which does not actually exist on the remote anymore. #2778 - -* The command `magit-diff-dwim' learned about additional cases. On - a non-current branch it now shows the diff for "CURRENT...BRANCH" - (instead of "BRANCH..CURRENT") and inside a stash buffer it shows - the diff for the commit at point. #2812 - -* The command `magit-push', which "o" is bound to in the push popup, - now offers the push-branch as default choice. Only if that is not - set does it default to the upstream as before. And when pushing a - commit that is reachable from HEAD, then it offers to push to the - push-branch or upstream of the current branch (which still has to - be forced explicitly). #2820 - -* Log commands now support completion of refs in the "refs/tags" and - "refs/pull" namespaces. #2878 - -* Added option `magit-no-confirm-default' to allow specifying commands - which should just use the default choice instead of having the user - confirm that by pressing RET. I recommend you don't use this, but - if you think that the defaults are so good that you always want to - use them, then this might make it a bit easier for you. #2741 - -* Added option `magit-slow-confirm' for users who are afraid they - would answer `y-or-n-p' questions to quickly. One action, deleting - all stashes, now defaults to having to be confirmed with "yes RET". - #2752 - -* Added option `magit-view-git-manual-method' to allow following links - to the Git Info manual by visiting the respective manpage instead. - de38266a - -* The option `magit-branch-prefer-remote-upstream' now also supports - regexps as members instead of only complete branch names. #2823 - -* The option `magit-branch-read-upstream-first' used to be a boolean. - Now it supports a third value `fallback', which means to read the - upstream first like `t', but if the value provided by the user does - not reference an existing revision, then it is treated as the name of - the new branch and the upstream is read using the second prompt, as - if the value of this option were `nil'. #2741 - -* When deleting a stash, the hash is now logged to the process log - buffer in addition to *Messages*, making it more likely that a - user who accidentally deleted a stash would find the information - required to undo that. #2746 - -* The environment variable `INSIDE_EMACS' is now set when calling git. - #2789 - -* `magit-define-popup' now allows specifying `:max-action-columns' per - section by using a function that returns a different value based on - the heading, which is passed as argument. 964fcbe0 - -* Added support for new gpg status letters X, Y, R, and E. #2845 - -* Added `hl-line-mode' to `magit-repolist-hook' and - `magit-submodule-list-hook' and defined those hooks explicitly. - 9f806732 - -* Added the `--gpg-sign=' option to the revert popup. 916e4599 - -* Added the `--sort=' option to the show-refs popup. (Use "C-u y" to - show the popup instead of invoking its default action as "y" does.) - 8ab81f06 - -* Added new faces `git-rebase-comment-heading' - and `git-rebase-comment-hash'. #2769 - -* `whitespace-mode' is not compatible with Magit buffers, where it is - now actively prevented from being turned on by the user. #2821 - -Fixes since v2.8.0 ------------------- - -* The command `magit-list-repositories' failed on empty repositories. - 09fac022 - -* The Git variable `pull.rebase' was ignored when determining whether - the current branch is being rebased onto its upstream in order to - display that information in the status buffer. 9c946ee3 - -* On 32-bit systems `magit-format-log-margin' failed because it tried - to truncate a time float that was too large for that. #2765 - -* On Emacs v25.1 the hunk-internal region flashed briefly on - mouse-down-1 events and the delimiting horizontal lines could end - up having the height of a regular line instead of just a single - pixel. #2758 - -* On Windows, when using a `windows-nt' Emacs together with a cygwin - Git, we failed to instruct Emacs to not use dos shell quoting when - calling git. And if Git wasn't available, then that caused an - error, which prevented Magit from being loaded. #2842 - -* The encoding of commit messages is controlled by the Git variable - `i18n.logOutputEncoding' but we failed to take that into account. - Fixes by setting `i18n.logOutputEncoding' to UTF-8, but only inside - Magit and only for `window-nt'. #2738, #2813 - -* It wasn't taken into account, until a few days after the release, - that as of Git v2.11, the default abbreviation size is no longer - hardcoded as 7 but instead scales with the repository size. #2880 - -* File and directory local variables were not honored in the buffers - used to write commit messages. #2852 - -* The caching mechanism that is supposed to ensure that sections of - unpulled and unpushed commits remain collapsed even when they - disappear was broken for a while. 0ad041c4 - -* Process sentinels did not in all cases ensure that the correct - buffer was current before doing something that assumes that this is - the case. Almost always that did not matter because it was the case - anyway, but if other timers are running then it is possible that - those make the wrong buffer current. #2836 - -* Process sentinels and filters used when blaming assumed that the - `exit' process status indicates success. #2836 - -* The commands `magit-clone' and `magit-init' did not work over Tramp. - #2806, #2807 - -* The commands `magit-worktree-checkout' and `magit-worktree-branch' - did not expand the path they pass to git, which is necessary because - git does not know the meaning of "~/". #2796 - -* The commands which create fixup/squash commands and then immediately - squash them into the target commit did not remove `--gpg-sign' or - add `--no-gpg-sign'. Signing such commits is not only unnecessary; - unless the passphrase was cached earlier, trying to sign resulted in - the process indefinitely waiting for the passphrase to arrive with - no way for the user to actually provide it. #2799 - -* Depending on the value of `magit-save-repository-buffers' the user - might have been asked whether s/he wants to save "git-rebase-todo", - which is never necessary and just a distraction. #2770, #2771 - -* The function `magit-save-repository-buffers' did not follow symlinks. - #2843 - -* Directories whose names begin with a period were filtered out when - using `magit-repository-directories' to calculate a list of repos. - #2830 - -* The user name and email, which are displayed when reading a gpg key - from the user, were not stripped from the chosen value before being - handed off to git. #2761 - -* When the upstream of the current branch is a remote whose url isn't - configured then that caused an error when refreshing the status - buffer. #2858 - -* Buffers visiting a blob used the file's `default-directory' - even when that directory did not exist in the working tree. The - top-level directory is now used as `default-directory' when the - subdirectory does not exist. cfe46766 - -* When visiting a directory by displaying a Dired buffer, we used to - display a buffer for the parent of the directory in question and - placed point on the name of the directory. But the intention always - was to show the Dired buffer for the directory itself. 5665ba94 - -* Visiting or deleting a submodule listed inside "Modules" failed. - The latter is now done by de-initalizing the module. c26b746e - -* In the list of commits that are being rebased in the status buffer, - HEAD was sometimes prefixed with "same" when "stop" would have been - correct. #2877 - -* The highlighting of a non-empty second line in a commit message was - not automatically updated. #2777 - -* When `--force-with-lease' was added to the `magit-push-popup', - `--force' was removed, but sometimes the former just isn't enough. - be39a9ba - -* The face `magit-diff-file-heading-highlight' used to inherit from - `magit-diff-file-heading', which by default makes text bold. That - resulted in the complete current heading to be bold, but only the - file-name part is supposed to be bold. a4b52516 - -* The manual stated that "DEL" in Git Rebase mode was bound to - `magit-diff-show-or-scroll-down', which was not the case. A new - command `git-rebase-show-or-scroll-down` has been added and bound - to "DEL" to provide this functionality. #2863 - -* The function `magit-repolist-status' did not expand the filename - which may be necessary when listing submodules. cc8c1385 - -* The macro `magit-with-temp-index' did honor the refresh cache, even - though its BODY may contain calls to git that are identical to - outside calls during the same refresh, but which are expected to - return a different value due to the use of a different index. #2883 - -* The log margin did not show the author of stashes. #2846 - -* The status header about the upstream did not take - `branch.NAME.rebase' into account. e65f15d0 - -* Highlighting overlays could not be garbage collected until after a - refresh. #2888 - -This release also contains typofixes, documentation updates, -code clean-ups, and other small bug fixes and improvements. - -Authors -------- - - 196 Jonas Bernoulli - 21 Kyle Meyer - 12 Noam Postavsky - 4 Alexander Gramiak - 2 Adam Porter - 2 Marco Wahl - 2 Sean Allred - 1 Allen - 1 Basil L. Contovounesios - 1 Chillar Anand - 1 Graham Dobbins - 1 Joakim Jalap - 1 Josiah Schwab - 1 Keshav Kini - 1 Marian Schubert - 1 Philipp Stephani - 1 Tunc Uzlu - 1 York Zhao diff --git a/.config/emacs/lisp/magit/docs/RelNotes/2.90.0.org b/.config/emacs/lisp/magit/docs/RelNotes/2.90.0.org deleted file mode 100644 index 4d9f6e5..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/2.90.0.org +++ /dev/null @@ -1,423 +0,0 @@ -* Magit v2.90.0 Release Notes - -Released 8th November 2018 by Jonas Bernoulli. - -I am pleased to announce the release of Magit version 2.90.0, -representing 395 commits by 18 contributors over five months. - -Also see https://emacsair.me/2018/11/08/magit-2.90. - -** Breaking changes - -- Dropped support for Emacs 24.4. At least Emacs 25.1 is required - now. - -- Dropped support for Git 1. At least Git 2.0.0 is required now. The - reason 2.0.0 is the new minimal version isn't its roundness but the - discovery that some parts of Magit already depended on that release - for two years. Since we will soon drop support for versions before - (probably) 2.4.0 anyway, we don't add a backward compatibility - kludge for the feature that already requires 2.0.0 but instead bump - the minimal version a first time. - -- Many commands were renamed, making their names longer. The old - names are defined as aliases for now. This is part one of a two - part change. In this release we rename, for example, ~magit-tag~ to - ~magit-tag-create~ and in a later release ~magit-tag-popup~ will be - renamed to ~magit-tag~. #3619 - -- Removed many obsolete variable and function aliases. - -- Removed many obsolete variables that are not mere aliases. - -- Removed ~magit-section~ accessor functions. Use the ~oref~ and ~oset~ - functions instead. - -- The function ~magit-section-when~ has been deprecated in favor - of ~magit-section-match~ or the new ~magit-section-value-if~. The - signatures of some related low-level functions have changed. #3590 - -- The ~submodule~ section type has been renamed to ~module~, same for the - plural variant and the related section-specific keymaps. 35f803c9c, - 59e3891fd - -- Added a new function ~magit-completing-read-multiple*~, which is more - like ~magit-completing-read~ than ~magit-completing-read-multiple~. - Authors of extension should use the new function, which eventually - will replace the old one. cb4d59190 - -** Changes since v2.13.0 - -- Added a new mode ~magit-wip-mode~, which enables automatic committing - to work-in-progress refs whenever that makes sense. Previously - multiple ~magit-wip-*~ modes had to be enabled to accomplish the same. - These modes still exist, the new mode is implemented on top of them, - but their explicit use by the user is discouraged. #3534 - -- Added a new option ~magit-wip-merge-branch~, which causes the current - branch to be merged into its wip refs after creating a new commit on - the current branch. This isn't enabled by default yet because some - additional tooling is required to deal with the fact that this - prevents the wip refs from ever being garbage collected, and results - in unwieldy commit graphs when history manipulation is involved. - #3534 - -- Added new commands ~magit-wip-log-index~ and ~magit-wip-log-worktree~. - #3534 - -- It is now possible to specify the major-mode used to edit commit - messages on a per-repository basis. The same major-mode is also - used to prettify commit messages when displaying existing commit - messages in ~magit-revision-mode~ buffers. - - To set the major-mode to be used for commit messages add an entry - to the appropriate ~.dir-locals.el~ file using ~git-commit-mode~ as - the key, as if that mode were a major-mode. This can also be used - to set other variables in the buffers used to /edit/ commit messages. - - If ~$GIT_WORK_TREE/.git~ is a file, then ~$GIT_WORK_TREE/.dir-locals.el~ - would normally not apply when editing a file inside ~$GIT_DIR~. Magit - uses it anyway unless ~$GIT_DIR/.dir-locals.el~ exists. - - 55ba0534c, d7412da32, c5269547a - -- Added a new major-mode ~git-commit-elisp-text-mode~ intended to be - used when editing commit messages for Elisp projects. It derives - from ~text-mode~ and additionally highlights ~`symbols'~ and "strings". - d7fa6632b - -- Changed the order and the initial visibility of log sections in the - status buffer to optimize for "usefulness". Previously the focus - was on making it more likely that the user did not ignore the less - frequently useful logs, but that was quite annoying because it got - in the way of the more frequently performed tasks. #3518 - -- Added new option ~magit-status-initial-section~, which controls which - section point is placed on when a status buffer is created. The new - default is to place point on the section that follows the headers, - i.e., the second section. This is quite flexible, you might want to - read the doc-string. 87de83da8, #3562, #3518 - -- Added new commands ~magit-commit-absorb~ and ~magit-commit-absorb-popup~. - These commands depend on the ~git-autofixup~ script, which is available - from https://github.com/torbiak/git-autofixup. #3053 - -- Began migrating from using section "types" to using section classes - that can inherit from other classes. #3590 - -- Removed many backward compatibility hacks, which are no longer - necessary. - -- Began to use features and many convenience functions that we - couldn't use before because we still supported Emacs 24.4. - -- ~magit-file-rename~ now reads the target from the same directory as - the source. This is more convenient because removing parts of the - path is easier than adding them again. - -- Added new ~magit-gitignore-popup~ and bound ~I~ to it, making it - possible to use ~i~ for the ~magit-imerge-popup~ from the ~magit-imerge~ - package. - -- Renamed the existing command ~magit-describe-section~ to - ~magit-describe-section-briefly~ and added a new command - ~magit-describe-section~, which pops up a ~*Help*~ buffer, - which contains information about the function and hook - used to insert the section. #3539 - -- Added new ~magit-refname-pullreq~ face and a corresponding entry to - ~magit-ref-namespaces~. - -- Added new option ~magit-log-trace-definition-function~, which allows - specifying the function that ~magit-log-trace-definition~ should use - to determine the function at point. The default is ~which-function~. - Previously the less complete ~add-log-current-defun~ was used. - #3483, 9ff266358 - -- fixup! and squash! are now highlighted like [keywords] in logs. - 426773040 - -- Added new stub commands ~magit-browse-thing~ and ~magit-edit-thing~. - Like other ~magit-*-thing~ functions they are intend to be replaced - in section-specific keymaps. The ~forge~ package will use do so for - these commands. 56fccaca6, 0fa3092eb - -- In case they are bound when Magit is loaded then ~$GIT_DIR~ and - ~$GIT_WORK_TREE~ are unset now. Magit breaks if these variables are - set and the most likely cause for them to be set is a user error. - 2d7d5d840 - -- ~magit-merge-into~ now only offers local branches for completion and - defaults to the upstream. If the upstream is a remote branch then - it defaults to the respective local branch. a52d70198 - -- It is now possible to set the face used to highlight the headings of - certain sections using the new ~heading-highlight-face~ slot. 2319a1e0e - -- The summary line of a commit message and the first line of notes are - now emphasized more to make it more obvious what text is part of the - commit message and what text was added by a note. fda4b936c - -- Detection of the branch at point was improved. #3530 - -- Added new shortstat margin style for logs. Performance isn't good - yet, so you might want to avoid this for long logs. #3035 - -- Added new variable ~magit-perl-executable~ for platforms that put ~perl~ - in unusual places. We use ~perl~ for some one-liners that are embedded - in lisp because we known that it is available because ~git~ depends on - it. #3538 - -- Added new command ~magit-reset-worktree~. The existing ~magit-reset-*~ - commands already implemented the variants supported by ~git reset~, - now Magit also implements the variant missing from that. b4d5c2bee - -- Improved ~magit-process-password-auth-source~'s entry matching. - 60a335e5c - -- Added new hook ~magit-create-buffer~ hook. 2113dfc3d - -- When the user "discards" a file with conflicts then they are asked - which side of the conflict they want to keep. When multiple files - are selected, then it is now possible to decide for all of them at - once. #3553 - -- Added option ~--ignore-submodules~ to diff popups. This option does - not only affect diffs but also the dedicated module sections and can - therefore be used to temporarily hide all information about modules, - which can be expensive to calculate. #3555, #3568 - -- Added ~--graph~ to the default value of ~magit-log-select-arguments~ - instead of hard-coding this argument for some of the users of the - log-select machinery. #3559 - -- The upstream of the current branch is no emphasized in logs, by - default by making it italic. #3573 - -- Added new command ~magit-submodule-remove~ and the new related option - ~magit-submodule-remove-trash-gitdirs~. The default is to not trash - the gitdirs. ~magit-submodule-add~ now offers to reuse an existing - gitdir when re-adding a submodule. #3585 - -- ~magit-submodule-add~ is run asynchronously now. #3585 - -- Information about the running Git process is now also shown in the - mode-line of buffers that were created after the process was - started. 43264c873 - -- Rebase commands that continue a rebase sequence can now use ~git rbr~ - instead of ~git rebase~. To initiate a rebase sequence using ~git rbr~ - you may use https://github.com/fanatoly/magit-rbr. c2cd780b2 - -- The manual is now also available in epub format, but it isn't very - pretty. #3579 - -- Added new hooks ~magit-stage-hook~ and ~magit-unstage-hook~. #3496 - -- Added new hook ~git-commit-post-finish-hook~, a hook that has been - requested many times but which I did not implement before because it - is impossible to make 100% reliable. When the ~emacsclient~ returns, - then that does not mean that the calling process is done too. We - avoid a race condition by waiting for ~HEAD~ to point to a different - commit than it used to point to, before running the hook. If it - takes longer than a second for this to happen, then the hook is not - run. A few unsafe commands are also blacklisted because they - perform other things after creating the commit and that would lead - to another race condition. #3615, d445a3d30, af4bf8df8 - - This hook is used instead of ~with-editor-post-finish-hook~ (on which - the former is build) to merge the current branch into its wip refs - when ~magit-wip-merge-branch~ is non-nil. - -- Added new hook ~magit-post-commit-hook~, which is only run after - running a ~magit-commit-*~ command that does not require the user - to edit the commit message. #3615 - -- ~magit-format-patch~ can now be told to only include the changes to - certain files in the patch. It now also refreshes Magit buffers. - #3601 - -- The list of related refs in ~magit-revision-mode~ buffers is no longer - truncate when it doesn't fit on a single line. Instead users can - now specify the kinds of refs that should be inserted in such - buffers using the option ~magit-revision-insert-related-refs~. #3487 - -- Added new function ~magit-gitdir~ scheduled to replace ~magit-git-dir~ - eventually because the latter has a really strange signature. - 5f407a29a - -- Created new libraries from existing code. 9efcb1e8b ff - -- The option ~magit-revision-show-gravatar~ is now easier to customize. - Customizing it to only show one of the two images actually works - now. f4b8fee66, b82228bc6 - -- The option ~magit-repository-directories~ has a non-nil default value - now. f77d1158b - -- The list of stashes in the status buffer is initially collapsed now. - 4dc1d0593 - -- The commands ~magit-previous-line~ and ~magit-next-line~ are used by - default now. 3ae75c865 - -- Added support for ~--left-right~ output in logs. #3627 - -- Added new option ~magit-with-editor-envvar~. Changing its value from - ~GIT_EDITOR~ to ~GIT_SEQUENCE_EDITOR~ allows users to continue to use - Magit (~git-rebase.el~ actually) to edit rebase sequence but to use - another editor to edit commit messages and such. #3629 - -- Added new option ~magit-clone-default-directory~. #3635 - -- ~magit-ref-namespaces~ is now taken into account when colorizing - branch names in buffers listing refs. #3645 - -- Added new option ~magit-revision-fill-summary-line~. #3610 - -** Fixes since v2.13.0 - -- A confirmation prompt during rebase was wrong. 37d76f409 - -- ~magit-rebase-autosquash~ asked for confirmation when the user already - confirmed earlier. 02e6c75b6 - -- ~magit-commit-add-log~ inserted after the diff that gets inserted if - ~commit.verbose~ is ~true~. #3480 - -- ~magit-log-wash-rev~ errored in ~magit-cherry-mode~, starting with Emacs - 26.1. - -- ~magit-dired-jump~ failed, starting with Emacs 26.1. #3469 - -- Magit used a completion function to make the built-in completion - respect the collection's order. Even though that wasn't necessary - for Ivy and Helm it did the same here, which became a problem when a - change in Helm caused fuzzy completion to break in combination with - a completion function. Likewise a change in Ivy caused Magit's sort - order to be ignored, which we work around now. #3476, #3477 - -- In some edge cases ~magit-branch-pull-request~ used to set Git - variables to invalid values. #3417 - -- The section visibility cache used ~eq~ when it should have used ~equal~. - It also briefly used ~alist-get~, which we cannot do because that did - not take a ~testfn~ argument in Emacs 25. #3495, #3499 - -- Detecting whether a commit has already been pushed to a "publishing" - branch was much slower than it had to be. #3519 - -- ~magit-gitignore-popup~'s autoload definition was broken. - -- When using cygwin, then ~git-commit-setup-font-lock~ could end up - trying to run git in a non-existent directory. #3505 - -- ~magit-completing-read~ did not protect the value of ~this-command~ even - though there is code that assumes it does. #3529 - -- ~magit-read-file-trace~ in some cases claimed that valid user input - was invalid even though it was valid. Now we don't try to validate - it anymore. #3531 - -- We didn't account for the surprising fact that asking whether the - value of a local variable is risky can change point. #3541 - -- ~magit-merge-into~ signaled an error if the upstream of the current - branch isn't configured instead of letting the user pick a target. - #3550 - -- Some of the more complex ~magit-cherry-*~ variants did not abort if - the first step failed. #3556 - -- Trying to visit a commit of a submodule directly from the status - buffer of the super-projects resulted in an error. #3563 - -- ~magit-file-rename~ failed to rename a file that is located at the - top-level of the working tree. #3569 - -- Magit didn't account for ~git rebase -i --root~ corrupting the root - commit's author date field, resulting in its output being corrupted - too. #3574 - -- If given one invalid rev, then ~magit-rev-eq~ returned ~nil~, but when - both revs are invalid, then it returned ~t~. Now it returns ~nil~ in - both cases. - -- In an edge case ~magit-diff-type~ falsely concluded that the - uncommitted changes in a diff buffer already are committed. #2627 - -- ~magit--github-url-p~ failed to return ~t~ for an url for Github - Enterprise instances. #3572 - -- Trying to insert Gravatar images resulted in an error if the service - is not reachable. #3597 - -- ~magit-display-buffer~ always selected the appropriate frame even if - that was already selected. That is undesirable because selecting - a frame has side-effects. f07eb85c6 - -- A key binding was not updated when ~magit-submodule-deinit~ was renamed - to ~magit-submodule-unpopulate~. b06845208 - -- ~magit-submodule-visit~ could end up re-populating the visited module. - 3d794cd01 - -- The third-party ~git-annex~ program converts submodule gitdirs to - symlinks, which we did not account for. #3599 - -- ~magit-bisect-start~ did fail silently when invalid user input, which - flipped the good and bad revisions, instead of providing an - informative error message. #3604 - -- ~magit-bisect-start~ did fail silently when there are uncommitted - changes instead of providing an informative error message. In some - cases it actually is possible to bisect with uncommitted changes but - that would be dangerous and we do not try to detect whether that is - the case and just always error out. #3604 - -- When applying changes, then the ~--unidiff-zero~ and ~-C0~ arguments - were not automatically used when needed. The former wasn't used - because of a bug, the latter because I was not aware that there - was an edge case that makes that necessary. #3608 - -- Backported a fix (from Emacs 27) for an Emacs bug that sometimes - caused ~git rebase~ to fail to acquire the ~index.lock~. #2708, - https://debbugs.gnu.org/cgi/bugreport.cgi?bug=21559 - -- Autoloading ~magit-submodules~ didn't work. #3618 - -- Reverting files failed if the selection contained only binary files. - c7bbe3e9a - -- ~magit-read-repository~ failed when ~magit-repository-directories~ is - non-nil but no repository can be found in those directories. #3636 - -- Attempting to reverse changes to binary files failed with an error - that wasn't informative enough. #3625 - -- When a local branch is being renamed, then ~magit-branch-rename~ used - to also rename the (remote) push-target, which is unsafe in some - cases. Now it always asks the user before doing so. 14c7b1381 - -* Authors - - 333 Jonas Bernoulli - 31 Kyle Meyer - 13 Noam Postavsky - 2 Phil Sainty - 1 Alex Branham - 1 Aria Edmonds - 1 Arialdo Martini - 1 Basil L. Contovounesios - 1 Benjamin Motz - 1 Bob Uhl - 1 Eric Prud'hommeaux - 1 Felix Yan - 1 John Morris - 1 Jordan Galby - 1 Louis Roché - 1 Mak Kolybabi - 1 Miciah Masters - 1 N. Troy de Freitas - 1 Pierre Neidhardt - 1 Raimon Grau diff --git a/.config/emacs/lisp/magit/docs/RelNotes/2.90.1.org b/.config/emacs/lisp/magit/docs/RelNotes/2.90.1.org deleted file mode 100644 index 2c601f8..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/2.90.1.org +++ /dev/null @@ -1,39 +0,0 @@ -* Magit v2.90.1 Release Notes -** Changes since v2.90.0 - -- Added ~bug-reference-mode~ to ~git-commit-setup-hook~. e19e8fb1e - -- The "Version" column in ~magit-submodule-list-mode~ and - ~magit-repolist-mode~ buffers now shows when a repository is dirty. - 0b86dbfd6 - -- Added new command ~magit-log-merged~. This command requires - ~git-when-merged~ (https://github.com/mhagger/git-when-merged). It - isn't bound in ~magit-log-popup~ by default. To add it, you can use - something like - - #+BEGIN_SRC emacs-lisp - (magit-define-popup-action 'magit-log-popup - ?m "Log commit's merge" 'magit-log-merged) - #+END_SRC - - #3657 - -** Fixes since v2.90.0 - -- Bumped the minimal required version of ~git-commit~ to the correct - version. e9bd33758 - -- Dropped the new "v" prefix that we started to add to release tags - starting with the previous release in places where that prefix is - undesirable. f441cf6d7 - -- Staging and unstaging submodules while ~diff.submodule~'s value is ~log~ - broke shortly before the v2.90.0 release. #3654 - -* Authors - - 10 Jonas Bernoulli - 1 Allen Li - 1 Kevin Brubeck Unhammer - 1 Kyle Meyer diff --git a/.config/emacs/lisp/magit/docs/RelNotes/3.0.0.org b/.config/emacs/lisp/magit/docs/RelNotes/3.0.0.org deleted file mode 100644 index 0c9883d..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/3.0.0.org +++ /dev/null @@ -1,686 +0,0 @@ -* Magit v3.0.0 Release Notes - -Released 25th May 2021 by Jonas Bernoulli. - -I am pleased to announce the release of Magit version 3.0.0, -representing 1264 commits by 87 contributors over 2.5 years. - -Also see https://emacsair.me/2021/05/25/magit-3.0. - -** Breaking changes - -- Dropped support for Git v2.0 and v2.1. - -- After some users intervened I have decided to NOT drop support for - Emacs 25 in this release as I had intended to do. Emacs 25 should - remain supported for at least a few more releases. - -- Magit now uses Transient instead of Magit-Popup. In the transition - many popups gained new arguments and/or commands, most of which are - not mentioned explicitly in these release notes. Many of these - commands are hidden by default because they are only useful to a - subset of users. See https://emacsair.me/2019/02/14/transient-0.1 - for information about the new Transient library and how to enable - hidden commands, among other things. - -- The commands ~magit-branch-pull-request~, ~magit-checkout-pull-request~ - and ~magit-worktree-checkout-pull-request~ were removed in favor of - improved implementations provided by the new Forge package. (See - https://emacsair.me/2018/12/19/forge-0.1 for more information about - Forge.) - -- ~C-c C-e~ is no longer bound to ~magit-dispatch-popup~. It is bound to - ~magit-edit-thing~ now, so that Forge can add section-specific - bindings using this key. ~magit-dispatch-popup~ has been renamed to - ~magit-dispatch~ and continues to be available on ~h~, ~?~ and ~C-c C-c~. - #3659 - -- ~C-c C-b~ is no longer bound to ~magit-browse-thing~ to avoid a conflict - with ~magit-go-backward~ in diff and log buffers. ~C-c C-w~ (as in web) - is used instead now. #3659 - -- The option ~magit-display-file-buffer-function~ was removed. 8a214c9fb - -- The buffer-local variable ~magit-refresh-arguments~ was replaced with - several variables because ~(nth N magit-refresh-arguments)~ just isn't - very informative. Several related API functions had to be changed - in incompatible ways. This was done by adding new functions and - keeping the old variable and functions around for backward - compatibility. Packages using the obsolete variable and functions - should be adjusted soon. #3836 - -- Magit-Section is now distributed as a separate package, as announced - here: https://emacsair.me/2020/01/23/magit-section. #4003 - -- Magit now adds three global key bindings, which can be prevented - by setting the new option ~magit-define-global-key-bindings~ before - loading ~magit~. Note that if you bind these keys to other commands - anywhere in your init file (even *after* loading ~magit~), then Magit - won't override those bindings. See the options doc-string for - more information. #4237 - -- Magit no longer depends on ~async-bytecomp~ to avoid a certain class - of mystery bugs because this effort backfired. 86eec7ba3 - -- ~global-git-commit-mode~ is no longer autoloaded. Users who commit - from the command-line but still want to use ~git-commit-mode~, might - now have to load ~git-commit~ explicitly in their init file. - 13f20763a - -** Changes since v2.90.0 - -- It isn't always obvious that a section can be expanded, especially - to users who are just getting started with Magit. Mainly to make - it easier for those users, expandable and collapsible sections now - get an indicator in the fringe. - - The new option ~magit-section-visibility-indicator~ can be used to - disable this or to select the alternative style, which shows an - ellipsis at the end of the heading of each expandable section - instead. #3679 - -- The "Version" column in ~magit-submodule-list-mode~ and - ~magit-repolist-mode~ buffers now shows when a repository is dirty. - 0b86dbfd6 - -- Added new command ~magit-log-merged~. This command requires - ~git-when-merged~ (https://github.com/mhagger/git-when-merged). - It is a suffix of ~magit-log~ but is disabled by default. #3657 - -- Added new class slot ~keymap~ to allow other packages to define - section-specific keymaps without naming them ~magit-TYPE-section-map~, - which would mean using a symbol prefix (~magit-~) that does not match - the package name. - -- Added new option ~magit-diff-refine-ignore-whitespace~, overriding and - defaulting to the value of ~smerge-refine-ignore-whitespace~. #3671 - -- Added new option ~magit-diff-paint-whitespace-lines~, which controls - in what kind of lines (added/removed/context) whitespace errors are - highlighted. #3671 - -- It is now possible to show whitespace errors only in uncommitted - changes by setting ~magit-diff-paint-whitespace~ to ~uncommitted~. The - obsolete value ~status~ is treated as a synonym. The intention always - was to allow limiting to uncommitted changes and limiting to changes - shown in the status buffer was the closest approximation readily - available when this feature was first added. #3671 - -- The commands ~magit-commit-instant-fixup~, ~magit-commit-instant-squash~ - and ~magit-rebase-autosquash~ now unconditionally preserve empty - commits that were already present before the autosquash rebase - performed by these commands. This is the safe default; if you want - to drop such commits, then you have to enable ~--autosquash~ in the - popup and then invoke ~magit-rebase-interactive~. #3670 - -- ~magit-rebase-remove-commit~ now supports removing the ~HEAD~ - commit. #4195 - -- The option ~magit-repository-directories~ defaults to ~nil~ again - because the non-nil default added in v2.90.0 led to surprising - changes in behavior. The documentation of this option and the - related ~magit-status~ command were made less ambiguous. #3673 - -- Renamed the face ~git-commit-note~ to ~git-commit-keyword~ because that - is what text in brackets is called elsewhere in Magit and because - the term "note" was ambiguous in this context. The old face name - is still defined as an alias, but that will be removed eventually. - -- The command ~magit-worktree-checkout~ now also offers tags and remote - branches as completion candidates. #3692 - -- The command ~magit-commit-reword~ now always uses ~--allow-empty~ - because when you reword an empty commit, then you have already - confirmed that you are okay with that commit being empty. - -- The new buffer-local variable ~git-commit-need-summary-line~ can - be of use if you want to write Git notes without separating the - first line with an empty line from the rest of the text. #3676 - -- Made ~magit-tag-release~ more flexible and added it as a suffix of - ~magit-tag~. 2d14f84b2 - -- Bound "C-c C-o" (in addition to "C-c C-w") to ~magit-browse-thing~ for - consistency with ~org-open-at-point~'s binding. 1e1193666 - -- ~magit-copy-section-value~ now supports stripping diff markers. #3716 - -- ~magit-insert-*-branch-header~ now colorizes keywords in the message. - 98e328200 - -- ~magit-unstage~ can now unstage files that were staged using - ~--intent-to-add~. #3753 - -- ~magit-read-branch-or-commit~ now offers symbolic refnames such as - ~ORIG_HEAD~ as completion candidates. #3766 - -- ~magit-stage-modified~ and ~magit-unstage-all~ now take the log file - filter into account. #3767 - -- New command ~magit-skip-worktree~ can be used to tell Git to pretend - that the working tree version is up-to-date; ~magit-no-skip-worktree~ - does the opposite. Both commands are available from the - ~magit-gitignore~ prefix but are disabled by default. #3710 - -- ~--rebase-merges~, an option available in Git version 2.18.0 and - later, is now supported. The ~--rebase-merges~ infix of - ~magit-rebase~ is disabled by default. #3762 - -- New command ~git-rebase-break~ inserts a "break" action in the - rebase to-do sequence (available as of Git v2.20). #3762 - -- ~git-rebase-kill-line~ and the commands for changing the action of a - commit line (e.g., ~git-rebase-squash~) learned to work on all lines - selected by the region. #4172 - -- The ~--color-moved~ diff argument is supported now, but isn't - available from the diff transients by default. To enable it - use "C-x l" in those transients. #3424 - -- Added new option ~magit-revision-filter-files-on-follow~ that - controls whether a revision buffer shown from a log shares the log's - file restriction despite ~--follow~ being in the log arguments. - #3680 - -- ~magit-cherry~ is now available from the ~magit-dispatch~ prefix. - ef311f378 - -- ~magit-cherry-spinoff~ now offers the upstream as the default - starting-point. e5a2a0ac2 - -- Added new command ~magit-branch-spinout~. #3794. - -- ~magit-process-password-auth-source~ now allows the use of emails as - usernames. 05d82d501 - -- Added new option ~magit-prefer-push-default~, which controls whether - commands that configure the push-remote do so by setting the value - of ~remote.pushDefault~ or ~branch..pushRemote~. Also removed - option ~magit-remote-set-if-missing~. 07ca042b6 - -- Support for bookmarks was rewritten from scratch. #3836, cd391a035 - -- The new options ~magit-prefix-use-buffer-arguments~ and - ~magit-direct-use-buffer-arguments~ replace the old option - ~magit-use-sticky-arguments~. The default "stickiness" of arguments - has changed. #3836, 0e67ca9eb - -- Like when moving through a log, moving through a list of cherries - now automatically updates the revision or blob buffer. #3836 - -- Added new option ~magit-worktree-read-directory-name-function~. #3820 - -- Basic optional support for ~libgit2~ was added, but because so few - functions are currently implemented using that library, opting in - currently has almost no effect. #3841 - -- ~git bisect~ is now run asynchronously. #3802 - -- ~magit-bisect~ now supports specifying alternate terms. The new - infixes and suffix related to this functionality are disabled by - default. - -- ~magit-branch-or-commit-at-point~ now falls back to an abbreviated - hash instead of something like "master~2", because the latter often - leads to undesirable behavior. fd5eb5b43 - -- ~magit-toggle-buffer-lock~ is now a suffix of both ~magit-diff~ and - ~magit-log~. c09993112 - -- When invoked with a prefix argument, then ~magit-clone~ now acts as a - prefix command. If the new option ~magit-clone-always-transient~ is - non-nil, then it always acts as a prefix command. #3846 - -- Clone commands now accept repository names and similar abbreviations - in addition to complete urls. The new options ~magit-clone-name-alist~ - and ~magit-clone-url-format~ control how the translation is done. #3846 - -- When called from ~magit-dispatch~, then ~magit-diff~ and ~magit-log~ no - longer set the file limit to the file visited in the current buffer. - ccc72469e - -- ~RET~ (~magit-diff-visit-file~) on a committed change now always visits - the respective commit. Previously it did that for all commits - except the ~HEAD~ commit. This made it impossible to visit the ~HEAD~ - commit using this or a related command and also was inconsistent. - - Likewise ~RET~ on an uncommitted removal now visits ~HEAD~, the last - commit that still had those lines. Previously it visited the file - in the working tree, making it difficult to blame the previous - version of modified lines. - - Now ~C-RET~ (~magit-diff-visit-worktree~) has to be used to visit the - file in the working tree for any commit or uncommitted removals. - Setting the new option ~magit-diff-visit-avoid-head-blob~ to a non-nil - value restores the old behavior of ~magit-diff-visit-file~. #3848 - -- ~magit-diff-visit-worktree~ now does a much better job at jumping to - the correct location in the file. c9e5425cd - -- Added new command ~magit-find-file-other-frame~. 9a69c74ca - -- Renamed command ~magit-diff-visit-file-worktree~ to - ~magit-diff-visit-worktree-file~. 4f739cd35 - -- Added new commands ~magit-diff-visit-file-other-frame~, - ~magit-diff-visit-worktree-file-other-window~, and - ~magit-diff-visit-worktree-file-other-frame~. 756d61911, 6704b3248 - -- Added new option ~magit-process-prompt-functions~. #3845 - -- ~magit-find-file~ is now available from ~magit-file-dispatch~. - 9c587d458 - -- ~magit-find-file~ and related commands learned to visit a file from - the worktree or index. #3860 - -- ~magit-find-file~ and related commands learned to go to the position - in the visited file that corresponds to the position in the - previously current buffer. #3860 - -- ~magit-diff-buffer-file~ learned to visit a commit instead of a range - when appropriate. #3860 - -- ~magit-show-commit~ and ~magit-diff-buffer-file~ learned to go to the - position in the diff that corresponds to the position in the - previously current file-visiting buffer. #3860 - -- Added new command ~magit-blob-visit-file~. When visiting a blob, then - it goes to the same location in the respective file in the working - tree. #3860 - -- ~magit-add-change-log-entry{,-other-window}~ learned to extract the - file name from blob-visiting buffers. - -- ~magit-tag-release~ now runs ~git~ asynchronously. #3855 - -- When invoked with two prefix arguments, then ~magit-mode-burry-buffer~ - now also kills all other Magit buffers associated with the current - repository. #3863 - -- ~magit-branch-or-commit-at-point~ was taught about Forge pull-requests. - 9447edd12 - -- When merging a branch that corresponds to a Forge pull-request, then - the commit message is modified to contain the pull-request number. - 15331d7c0 - -- For consistency ~magit-file-rename~ now also renames buffers that - visit untracked files. #3916 - -- Additional history simplification arguments were added to the log - transients. Because only a minority of users will use those, they - were put on levels that are not shown by default. 8f8a2f1cf - -- Added new commands ~magit-assume-unchanged, ~magit-no-assume-unchanged~, - ~magit-jump-to-skip-worktree~ and ~magit-jump-to-assume-unchanged~, and - section inserter ~magit-insert-assume-unchanged-files~. 2d0de8614 ff - -- Magit buffers are now compatible with ~whitespace-mode~ (and other - modes which use font-lock). #3840 - -- Added new command ~magit-status-here~ available from file-visiting - buffers at ~C-c M-g g~. This command tries to go to the position in - the status buffer that corresponds to the position in the current - file-visiting buffer. Setting ~magit-status-goto-file-position~ to - a non-nil value causes ~magit-status~ to behave the same way. #3930 - -- Replaced ~magit-repolist-column-dirty~ with ~magit-repolist-column-flag~ - which allows specifying arbitrary flags and predicates in custom order - using ~magit-repolist-column-flag-alist~. #3936 #3937 - -- The buffer that shows a stash is now updated automatically when - moving through a list of stashes if the user added the new - ~magit-status-maybe-update-stash-buffer~ and/or - ~magit-stashes-maybe-update-stash-buffer~ to - ~magit-section-movement-hook~. #3943 - -- Added new commands ~magit-log-matching-branches~ and - ~magit-log-matching-tags~. #3958, #3983 - -- Added new option ~magit-disable-line-numbers~. #3971 - -- Added new option ~magit-log-margin-show-committer-date~. 1b9995238 - -- Added new command ~magit-worktree-move~ to allow you to move an - existing worktree to a new directory. #3978 - -- Introduced two new faces to customize the appearance of commit messages: - ~magit-diff-revision-summary~ and ~magit-diff-revision-summary-highlight~. - #3988 - -- Commands under the ~magit-gitignore~ prefix now include directories - that contain only untracked files as completion candidates. #3985 - -- Added new command ~magit-toggle-verbose-refresh~. c63ec3920 - -- Added new function ~magit-disable-section-inserter~, which can be used - to disable a section only in the current repository. This mechanism - is useful for exceptionally large repositories. #4017 - -- Added new transient prefix command ~magit-status-jump~ and turned the - existing jumper commands into suffixes. 655950f40 - -- Added new option ~magit-copy-revision-abbreviated~. #4014 - -- Added new transient prefix command ~git-commit-insert-pseudo-header~ - and turned the existing inserter commands into suffixes. e88242679 - -- Added new command ~magit-push-notes-ref~. dff0bca6f - -- The ~--irreversible-delete~ diff argument is supported now, but isn't - available from the diff transients by default. To enable it use - "C-x l" in those transients. #4056 - -- Added new command ~magit-reset-keep~. 0ea8b0ef6 - -- Added new option ~magit-reshelve-since-committer-only~. #4101 - -- Added new command ~magit-commit-absorb~ as an alternative to - ~magit-commit-autofixup~. 9423edc0b - -- Added new option ~magit-status-use-buffer-arguments~. #4046 - -- Added new command ~magit-project-status~. #4173 - -- Added new variable ~magit-process-extreme-logging~ for debugging - purposes. #4217 - -- Taught Isearch and Swiper how to expand Magit sections when the - current match is inside a hidden section and how to close sections - again. #3999 - -- Added new command ~magit-commit-absorb-modules~. 10b4bec53 - -- Added new transient command ~magit-shortlog~. #4262 - -- Added new command ~magit-generate-changelog~. c5e118111 - -- The name of the main branch is no longer hard-coded to "master". - Now we use the value of ~init.defaultBranch~ if that is set and the - named branch exists. If not, then some other names that are - commonly used for the main branch are tried as a potential fallback. - c4494ac0b - -- Added new option ~magit-diff-extra-stat-arguments~. 1bd4fe26e - -- Added support for ~git-credential-manager-core~. #4318 - -- The name of the upstream remote is no longer hard-code to "origin". - See the doc-string of function ~magit-primary-remote~ to learn how to - customize this. f883b62fe - -This release also contains numerous other improvements. - -** Fixes since v2.90.0 - -- Bumped the minimal required version of ~git-commit~ to the correct - version. e9bd33758 - -- Dropped the new "v" prefix that we started to add to release tags - starting with the previous release in places where that prefix is - undesirable. f441cf6d7 - -- Staging and unstaging submodules while ~diff.submodule~'s value is ~log~ - broke shortly before the v2.90.0 release. #3654 - -- When another window is already displaying the file buffer, then - ~magit-display-file-buffer-other-window~ did additionally display - it in the current window. #3662 - -- It was undefined whether highlighting of word-granularity - differences or of whitespace-error had higher priority. #3671 - -- The Custom type definition of ~magit-diff-adjust-tab-width~ was - broken. #3671 - -- In the log-select buffers point was no longer placed on the same - commit as was at point in the buffer from which the command was - invoked. #3674 - -- ~magit-diff-type~ falsely concluded that a diff buffer showed - unstaged changes when diffing a range where the right side resolves - to the same commit as ~HEAD~. #3666 - -- ~magit-log-trace-definition-function~ defaulted to ~which-function~, - which isn't reliable because it used Imenu, which uses a cache but - by default never invalidates. Now we use ~magit-which-function~, a - replacement that never uses an outdated cache. - -- ~magit-log-trace-definition~ didn't account for Git treating "-" - differently from, e.g., "_", leading to false-positives like - "foo-suffix" being considered a match for "foo". - -- ~magit-log-trace-definition~ didn't do the escaping that Git expects - for function names with colons. #4051 - -- A regression in ~magit-log-move-to-parent~ prevented it from doing its - job. #3682 - -- Since v2.11.0 ~magit-log-revision-headers-format~ lines in the log - output (shown via ~++header~) weren't displayed properly when - ~--graph~ was enabled. #4129 - -- ~magit-clone~ didn't run ~magit-credential-hook~. #3683 - -- ~magit-list-repositories~ failed if one of the repositories that it - tries to list is empty. #3686 - -- The summary element from ~git-commit-font-lock-keyword-1~ lost against - the elements of ~git-commit-elisp-text-mode-keywords~, causing the - summary line to lose its special appearance when a "string" or - `symbol' appears in it. - -- ~magit-split-branch-name~ did not take into account that remote names - can contain slashes. #3685 - -- ~magit-which-function~ now simply resets Imenu's cache and then calls - ~which-function~. The old approach that tried to outsmart Imenu was - broken. #3691 - -- ~magit-describe-section-briefly~ did not actually display a section - ident when called interactively, as the docstring claimed. Now it - displays the section ident, which is useful in - ~magit-status-initial-section~. - -- Section movement commands got confused by type change sections being - treated as a special kind of hunk. #3698 - -- ~x-strech-cursor~ was set globally. #3707 - -- ~magit-blame-echo~ was broken. #3720 - -- ~magit-rev-name~ sometimes returned ~nil~ even when it could return a - name and it returned, e.g., "origin/HEAD" instead of "origin/master". - 2042957a7, d500c442 - -- ~magit-insert-*-branch-header~ did not account for empty commit - messages. #3719 - -- ~magit--painted-branch-at-point~ failed in some cases, causing an - error. e7e612e3c - -- In newer Git versions the rebase list shown in the status buffer - could contain duplicated entries for the current commit. 1e1cd0e28 - -- When deleting a remote branch failed, the logic for deciding whether - to prune the local remote-tracking ref was too loose, leading to - false positives. #3650 - -- ~magit-ediff-stage~ offered untracked files as completion candidates - even though it cannot handle those. 8dd612dfb - -- Fix handling of passphrase prompts which are output with leading - carriage return, such as those produced by Openssh 8.0. #3843 - -- The default value for ~magit-view-git-manual-method~ was treated as - invalid. #3873 - -- Unlike other ~magit-*-files~ functions, ~magit-ignored-files~ returned - paths relative to the current directory instead of the top-level of - the repository. 6d3f12d58 - -- Staging a hunk applied the change to the wrong location in rare - cases where repetitive diff context prevented ~git apply~ from - finding the correct location. #3924 - -- Staging a hunk with no context now aborts, as staging a region - within such a hunk already did, to avoid unintended and confusing - results. #3924 - -- Adjusted many faces so that they continue to extend to the edge of - the window as intended. This was made necessary by a backward - incompatible change in Emacs 27. #3986 - -- The ability to stage regions from within intent-to-add files broke - for users running Git v2.19.0 or later due to a change in the - default display of these files in the diff output. #4026 - -- ~magit-stash-branch-here~ applied the stash without checking out the - new branch. d3cee7f8c - -- A regression in v2.90.0 led to ~magit-wip-mode~ committing to "/refs/heads/HEAD" rather than "/HEAD" when on a - detached head. - -- Modifying a file, marking it with a "skip-worktree" or "assume - unchanged" bit, and then modifying it again triggered a failure in - ~magit-wip-commit-worktree~. #4037 - -- ~magit-abbrev-length~ returned an incorrect result when - ~core.abbrev~ was explicitly set to "auto". - -- Calling ~magit-status~ in a repository with a corrupt Git - configuration didn't propagate the error and instead preseted the - directory as though it was uninitialized. #4337 - -- When the status buffer is not shown in any buffer but point is on - a hunk, and editing and saving the respective file causes, that - hunk to disappear or change, then Magit ended up changing point - in the file-visiting buffer. #4196 - -- Various bug fixes to - ~magit-branch-delete~ (3e73ff19d), - ~magit--{upstream,pushbranch}-suffix-predicate~ (0ce7fbbc2), - ~magit-patch-create~ (470272a0f), - ~magit--cherry-spinoff-read-args~ (add276810), - ~magit-refs--insert-cherry-commits~ (3b37e6dc1), - ~magit--{pushbranch,upstream}-suffix-predicate~ (cef3b1217), - ~magit-diff-insert-file-section~ (01cf0c165), - ~magit-insert-unpushed-to-upstream-or-recent~ (02445d6e3), - ~magit-ref-equal~ (46862d9d2), - ~magit-ref-fullname~ (66b85daea), - ~magit-insert-unpulled-from-upstream~ (0363e9bac), - ~magit-git-version~ (0abc761f5), - ~auto-revert-buffers--buffer-list-filter~ (713bd64bf), - ~magit-insert-revision-gravatar~ (1f7e84c26), - ~magit-process-unset-mode-line~ (457a685e5), - ~magit-ido-completing-read~ (f52ab7977), - ~magit-file-untrack~ (0984d77fb), - ~magit-ref-p~ (8b33bc7c7), - ~git-commit-setup~ (675b75ded), - ~magit-{,no-}skip-worktree~ (34d6ac27d), - ~magit-fetch-all~ (904bb82ca), - ~magit-branch-configure~ (7246bf291), - ~magit--maybe-update-blob-buffer~ (1d57893a6), - ~magit-...-maybe-update-...-buffer~ (8d3459b55), - ~magit-read-gpg-secret-key~ (9d68a455d), - ~magit-gitignore-in-subdir~ (8c4e8ed74), - ~magit-save-repository-buffers~ (82136796f), - ~magit-stash-drop~ (a4972766a), - ~magit-ignore-submodules-p~ (a7699f868), - ~magit-log-propertize-keywords~ (ac1ee3df5), - and then I stopped adding to this list. - -This release also contains numerous other bug fixes, typo fixes, and -documentation fixes. - -* Authors - - 1001 Jonas Bernoulli - 120 Kyle Meyer - 10 Basil L. Contovounesios - 9 Noam Postavsky - 5 Vladimir Panteleev - 4 Damien Cassou - 4 Daniel Martín - 4 Sam Cedarbaum - 4 Štěpán Němec - 3 Adam Porter - 3 Benjamin Motz - 3 Kévin Le Gouguec - 2 Alban Gruin - 2 Allen Li - 2 Bastian Beischer - 2 Clément Pit-Claudel - 2 Daniel Fleischer - 2 Evan Torrie - 2 Ingmar Sittl - 2 Leo Vivier - 2 Martin Polden - 2 Naoya Yamashita - 2 Phil Sainty - 2 Philipp Stephani - 2 Radon Rosborough - 2 Ryan C. Thompson - 2 Szunti - 2 Tassilo Horn - 2 Thierry Volpiatto - 2 Troy Hinckley - 2 zilongshanren - 1 Adam Kruszewski - 1 Adam Spiers - 1 Alexander Miller - 1 Andrew Eggenberger - 1 Andrew Psaltis - 1 Andrew Schwartzmeyer - 1 Arnau Roig Ninerola - 1 Ashlynn Anderson - 1 Ben North - 1 Brian Leung - 1 Dan Davison - 1 Danny Zhu - 1 David Ellison - 1 Dominique Quatravaux - 1 Eric - 1 Fritz Grabo - 1 Gregory Heytings - 1 Hussein Ait-Lahcen - 1 Ian Milligan - 1 Ilya Grigoriev - 1 Johann Klähn - 1 Johannes Altmanninger - 1 Jonas Galvão Xavier - 1 Jonathan Arnett - 1 Jonathan del Strother - 1 Jordan Galby - 1 Josh Elsasser - 1 Justin Guenther - 1 Keshav Kini - 1 Kevin Brubeck Unhammer - 1 Kevin J. Foley - 1 Knut Olav Bøhmer - 1 Magnus Malm - 1 Mario Rodas - 1 Martin Joerg - 1 Matthew Kraai - 1 Maxim Cournoyer - 1 Michael Griffiths - 1 Ola x Nilsson - 1 Pancho Horrillo - 1 Philipp Fehre - 1 Pritam Baral - 1 Roey Darwish Dror - 1 Sean Whitton - 1 Simon Pintarelli - 1 Steve Purcell - 1 Thomas Fini Hansen - 1 Topi Miettinen - 1 Tsuyoshi Kitamoto - 1 Vitaly Ostashov - 1 Vladimir Sedach - 1 Wojciech Siewierski - 1 Yann Herklotz - 1 Ynilu - 1 Zhu Zihao - 1 zakora diff --git a/.config/emacs/lisp/magit/docs/RelNotes/3.1.0.org b/.config/emacs/lisp/magit/docs/RelNotes/3.1.0.org deleted file mode 100644 index 9467c7b..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/3.1.0.org +++ /dev/null @@ -1,58 +0,0 @@ -* Magit v3.1.0 Release Notes - -Released 1st July 2021 by Jonas Bernoulli. - -I am pleased to announce the release of Magit version 3.1.0, -representing 31 commits by 4 contributors over one month. - -Also see https://emacsair.me/2021/07/01/magit-3.1. - -** Breaking changes - -- The function signature of ~magit-completing-read-multiple~ was not - compatible with that of ~completing-read-multiple~, so we deprecate - it. Use the improved ~magit-completing-read-multiple*~ instead. - #4420 - -- The description of ~magit-merge-into~ in the merge menu was changed - to "dissolve" (from "merge into"). In the future we are going to - change the key binding from "i" to "d" as well, to keep it mnemonic. - We don't make both changes at once in the hope that this makes the - transition easier for existing users. 4c096921f - -** Changes since v3.0.0 - -- Adjusted to changes to Eieio in Emacs 28. a3626277c, 54a0019f3 - -- Added new command ~magit-log-move-to-revision~. #4418 - -- ~A m~ is now also bound to ~magit-merge-squash~. Despite the name it - fits better there. 51152fdec - -** Fixes since v3.0.0 - -- Fixed ~magit-emacs-Q-command~ and ~make build~ for ELPA users. - f50c3aa56 - -- Fixed reading choice in ~magit-process-git-credential-manager-core~. - #4396 - -- ~magit-blame~ didn't account for quoted file names when parsing - output from ~git blame~. #4400 - -- A regression in v3.0.0 prevented ~magit-bisect-run~ from executing - ~git bisect run~ unless ~magit-bisect-start~ was called beforehand. - f592e367d - -- ~magit-log-select-quit~ failed to call ~magit-log-select-quit-function~. - #4423 - -- The entry for pull-requests in ~magit-list-refs-namespaces~ did not - match the ref names used by Forge for that purpose. 4c3373f9a - -* Authors - - 24 Jonas Bernoulli - 3 Kyle Meyer - 1 Siavash Askari Nasr - 1 TEC diff --git a/.config/emacs/lisp/magit/docs/RelNotes/3.2.0.org b/.config/emacs/lisp/magit/docs/RelNotes/3.2.0.org deleted file mode 100644 index 11f1ef4..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/3.2.0.org +++ /dev/null @@ -1,85 +0,0 @@ -* Magit v3.2.0 Release Notes - -Released 1st August 2021 by Jonas Bernoulli. - -I am pleased to announce the release of Magit version 3.2.0, -representing 84 commits by 5 contributors over one month. - -Also see https://emacsair.me/2021/08/01/magit-3.2. - -** Changes since v3.1.0 - -- The default of ~magit-bury-buffer-function~ was changed to - ~magit-mode-quit-window~. #4412 - -- Added new option ~magit-remote-git-executable~ alongside the existing - ~magit-git-executable~. Previously the latter was used for local and - remote ~git~ processes alike, now the former specifies the executable - that is used when Tramp is involved. Using a single variable was - problematic because we had to use an absolute path on Windows for - performance reasons but that path was almost certainly wrong when - using Tramp. #4447 - -- We now use an absolute path for ~magit-git-executable~ on macOS as - well because at least for some macOS users using just the name of - the executable performs horribly. #4447 - -- The section showing openpgp output in the revision buffer is now - collapsible and starts out collapsed for good signatures or when the - certificate is missing. This hopefully makes it more appealing to - enable ~--show-signature~ (and maybe even encourages some authors to - start signing commits). 1e08ac6fd - -- A mode change or rename can now be applied (un-/staged etc.) without - also applying edits to the same file and vice-versa. #4439 - -- Many commands that act on (or default to) the commit at point now - pick that up in a few more places; when the string at point is a - known hash, on a blame chunk, and on a hunk or file inside a log. - d8d3e4813, 40ad7a25c, 402112c6e - -- The default ~magit-pop-revision-stack-format~ now include the - committer date. 1f85297a3 - -- The default ~magit-log-revision-headers-format~ now includes notes. - 33bd79fd45 - -- Added new options ~magit-repolist-sort-key~ - and ~magit-submodule-list-sort-key~. #4409 - -- Added new function ~magit-repolist-column-flags~. 35067f512 - -- Added new option ~magit-ediff-use-indirect-buffers~. #4395 - -- Added new function ~magit-process-git~. fd5cf6173 - -- Added new function ~magit-git-config-p~. 60f82a323 - -** Fixes since v3.1.0 - -- In the normal case ~magit-name-tag~ failed to return the tag. - 14170b4ea - -- ~magit-completing-read-multiple*~ tried to use a variable that is - unbound if ~helm~ isn't loaded. 29b0cb489 - -- Some push commands couldn't deal with remote and branch names that - contain the percent character. #4428 - -- ~magit-git-shortlog~ got stuck in the repository in which it was first - invoked. 384610edb - -- ~magit-commit-augment~ did not support ~--allow-empty~. bbdfd4287 - -- Squash commands didn't fully take ~--author~ into account. 02d2917c6 - -- ~magit-completing-read-multiple*~ conflicted with the ~consult~ package. - #4437 - -* Authors - - 73 Jonas Bernoulli - 6 Kyle Meyer - 2 Boruch Baum - 1 Philippe Cavalaria - 1 Toon Claes diff --git a/.config/emacs/lisp/magit/docs/RelNotes/3.2.1.org b/.config/emacs/lisp/magit/docs/RelNotes/3.2.1.org deleted file mode 100644 index 2573a5b..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/3.2.1.org +++ /dev/null @@ -1,12 +0,0 @@ -* Magit v3.2.1 Release Notes - -Released 6st August 2021 by Jonas Bernoulli. - -I am pleased to announce the release of Magit version 3.2.1. - -This is the first release that is available from NonGNU Elpa. It is -identical to version 3.2.0 except for dependency metadata, which had -to be changed so that this package could be released on NonGNU Elpa. - -Also see https://emacsair.me/2021/08/06/nongnu-elpa -and https://elpa.nongnu.org/nongnu/magit.html. diff --git a/.config/emacs/lisp/magit/docs/RelNotes/3.3.0.org b/.config/emacs/lisp/magit/docs/RelNotes/3.3.0.org deleted file mode 100644 index 47371b4..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/3.3.0.org +++ /dev/null @@ -1,137 +0,0 @@ -* Magit v3.3.0 Release Notes - -Released 4th October 2021 by Jonas Bernoulli. - -I am pleased to announce the release of Magit version 3.3.0, -representing 88 commits by 6 contributors over two month. - -Also see https://emacsair.me/2021/10/04/magit-3.3. - -** Breaking changes - -- The last remaining alphabetic keys (both lower- and uppercase) are - now bound in ~magit-mode-map~. ~H~ to ~magit-describe-section~, ~j~ to the - new ~magit-status-quick~ (or ~magit-status-jump~ in status buffers), ~J~ - to the new ~magit-display-repository-buffer~, ~Q~ to ~magit-git-command~ - and ~Z~ to ~magit-worktree~, and once Forge is loaded, then ~N~ to - ~forge-dispatch~. (~Z~ used to be bound to ~magit-stash~, which now is - only available on ~z~.) #4259, 9bec1c54a, e401bd4d3 - -- ~I~ is now bound to ~magit-init~ instead of ~magit-gitignore~, which - continues to be available on ~i~. Users of the ~magit-imerge~ package - (which previously bound ~i~) should consult its library header for a - suggestion on how to resolve the resulting conflict. b54b537db - -** Changes since v3.2.0 - -- No longer automatically add ~--full-history~ when showing a log for a - single file that isn't being tracked anymore. #4381 - -- ~magit-stash-both~ now asks before discarding merge state. #4345 - -- Several infix arguments, which previously could only be disabled - or have a numeric value, can now also be enabled without having - an explicit numeric value. #4379 - -- Added ~-Xignore-space-change~ and ~-Xignore-all-space~ to ~magit-merge~. - Like most newly added expert arguments they have to be explicitly - [[https://docs.magit.vc/transient/Enabling-and-Disabling-Suffixes.html][revealed]]. #4387 - -- Added new command ~magit-status-quick~, which shows the status buffer - but avoids refreshing it for performance reasons. #4259 - -- Added new commands ~magit-display-repository-buffer~ (bound to ~j~ in - Magit buffers) and ~magit-switch-to-repository-buffer~ (bound to ~J~) - and variants for switching to any existing Magit buffer belonging - to the current repository. #4259 - -- Added new command ~magit-dired-am-apply-patches~ for use in Dired. - #4094. - -- Rearranged ~magit-patch~ and added a binding for ~magit-am~. 8ec3a1a21, - 8cadf302b - -- Added new command ~magit-help~ (bound to ~h~ in ~magit-dispatch~), which - simply shows Magit's Info manual. 5bba62629 - -- When listing entries for Imenu, then remove entry counts from group - titles for the benefit of third-party packages that need stable - titles. #4477 - -- Include Forge's ~pullreq~ and ~issue~ sections when listing entries for - Imenu. f4016f734 - -- Bound ~imenu~ in the ~magit-status-jump~ prefix. 678df30c3 - -- Added new transient prefix command ~magit-bundle~, which provides - support for ~git bundle~. #4392 - -- When minibuffer completion allows for a branch or a commit to be - selected and the former is preferred and thus offered as default - then, if possible, offer the commit at point as the first choice - initially accessible with ~next-history-element~. #4291 - -- Bound ~magit-refs-set-show-commit-count~ in the ~magit-show-refs~ - prefix. 2fe42f63d - -- Added new option ~magit-commit-diff-inhibit-same-window~. #4132 - -- Added support for invoking Smerge's "keep" commands when point is on - a hunk in a Magit buffer. They can be invoked using the same key - bindings as in file-visiting buffers or ~RET~, ~u~, ~b~ and ~l~. #4458 - -- Added new command ~magit-remote-unshallow~. #4480 - -- Added new option ~git-commit-use-local-message-ring~. #4503 - -** Fixes since v3.2.0 - -- Make ~magit-branch-remote-head~ and ~magit-branch-current~ fall back - to ~:inverse-video~ when the ~:box~ attribute isn't support, i.e., in - a terminal. If this change does not have any effect for you then - your theme probably changes these faces and should stop doing so. - #4206 - -- In some cases refreshing a buffer caused the cursor to jump to a - different position. #4148 - -- ~magit-convert-filename-for-git~ did not expand absolute filenames, - which is necessary because Git does not understand ~~/~. de1dc8e74 - -- ~magit-rebase~ did not enable ~--autostash~ by default but the - documentation says it does. 421be65a3 - -- ~magit-clone-read-repository~ did not convert filenames before passing - them to Git. 4aa7d2928 - -- Due to a regression in v2.90.0, ~magit-wip-log~ and - ~magit-wip-log-current~ failed to extract the previous tips of the - wip refs from the reflog (which is relevant when - ~~magit-wip-merge-branch~ is nil). c327824b0 - -- An old attempt to avoid needlessly updating section highlighting - did not actually succeed. #3976 - -- An error occurred when first showing a status buffer and - ~which-function-mode~ is enabled because that caused Imenu to collect - items at a time when that is not possible yet. #4481 - -- A change in Git v2.32.0 made it necessary to explicitly filter out - directories when committing to wip worktree refs. #4499 - -- Fixed appearance of Gravatar images by forcing their size instead - relying the service to return the promised size as advertised. - 8771401d4 - -- ~git-commit-setup~ enabled the major-mode after setting local - variables, which caused non-permanent variables to be reset. - ece2cb84d - -* Authors - - 76 Jonas Bernoulli - 8 Kyle Meyer - 1 Daniel Nagy - 1 Franklin Delehelle - 1 Jonathon McKitrick - 1 Lin Sun diff --git a/.config/emacs/lisp/magit/docs/RelNotes/4.0.0.org b/.config/emacs/lisp/magit/docs/RelNotes/4.0.0.org deleted file mode 100644 index 68bb6fb..0000000 --- a/.config/emacs/lisp/magit/docs/RelNotes/4.0.0.org +++ /dev/null @@ -1,532 +0,0 @@ -* Magit v4.0.0 Release Notes - -Released 8th August 2024 by Jonas Bernoulli. - -I am pleased to announce the release of Magit version 4.0.0, -representing 1077 commits by 69 contributors over three years. - -Also see https://emacsair.me/2024/08/09/magit-4.0. - -** Breaking changes - -- Dropped support for Emacs 25. 7c794201c4 - -- Removed several functions, variables and variable values that were obsoleted - in past releases: - - bc18ba942f Removed ~git-commit-fill-column~, obsolete since v2.11.0 - - 6b4f7f5811 Removed ~magit-section-when~, obsolete since v2.90.0 - - a8c92cc35d Removed face aliases, obsolete since v2.12.0 and v3.0.0 - - ed8067830f Removed variables and functions obsolete since v3.3.0 - - 553968346d Removed support for obsolete ~magit-branch-rename-push-target~ values - - b47efecfe6 Removed support for obsolete %-sequence in ~magit-branch-name-format~ - -- Removed library ~magit-libgit.el~, which was only a proof-of-concept, without - Magit actually making use of it. Packagers were discouraged from including - this library in the Magit package, but many disregarded that. Because that - caused issues for many users, it had to be removed. c9fd81217c, 703dfe5812 - -- Completed the switch to a new ~magit-completing-read-multiple~ implementation. - a162b8a71e - -** Changes since v3.3.0 - -- Added many context menus, which can be invoked using the mouse or a key - (~menu~ by default) and are a great way to discover context sensitive commands. - Context menus were added in Emacs 28.1 and are disabled by default. Enable - ~context-menu-mode~ or set ~magit-section-show-context-menu-for-emacs<28~ to ~t~, - if you are still using an older release. [[https://github.com/magit/magit/issues/4645][#4645]] - -- The menu-bar menu, which was severely neglected for many years, finally got a - makeover. It no longer offers a completely random subset of Magit's features. - Now it can be used to invoke most of the commands that could also be invoked - using ~magit-dispatch~; but by means of a small furry animal. 5641d3749c - -- Rewrote Imenu support, which resulted in a few new features and much less - code. 4727dcbe22 ff - -- Move imenu and bookmark support to the independently distributed ~magit-section~ - package, so that it can be used by third-party packages, without having to - depend on the ~magit~ package. [[https://github.com/magit/magit/issues/5104][#5104]] - -- One does not simply change key bindings; at least not as a package maintainer. - ~magit-define-global-key-bindings~ used to be a boolean, now it can be set to - ~recommended~, to opt in to new easier top-level bindings, which do not require - changing modifiers mid-sequence. 8b1f599de4 - -- For the longest time (which is why I don't consider this a bug fix) toggling - a section caused point to move to the beginning of that section. Stop doing - that, unless absolutely necessary. 9d8d5e5603 - -- Added support for displaying errors that occur when washing a section. - Use that for diff and log buffers, so users can investigate what went wrong. - 78a979fde5, 2bd3db69d6, d05b1ed381, a760dd1078 - -- Massively reduced the expansion of the essential macro ~magit-insert-section~, - moving most work to new support functions. [[https://github.com/magit/magit/issues/5130][#5130]] 13e4422584..058ca81497, - ee6fbba360..e2ca80a26e, 3695493ce8..f7cba11588 - -- Avoid expensive and/or unnecessary work, including: - - 8606488578 magit-save-repository-buffers: Rev-parse only once per directory - - ff4710afa6 Deprecate magit-git-dir to avoid needlessly repeating work - - e94b6ebfdb [[https://github.com/magit/magit/issues/4900][#4900]] Record diff-type in magit-diff-mode buffers - - 6852936364 [[https://github.com/magit/magit/issues/4768][#4768]] magit-wip-mode: Speedup activation by avoiding duplicated work - - 241b327b7a [[https://github.com/magit/magit/issues/4974][#4974]] Don't use markers in log buffers - - d536ef9e21 Don't preserve visibility in log buffers - - Limit use of log graphs and signature verification. 545a64c3ee, e32cec06a4 - - d73a3b11db Record child sections in reverse in log buffers - - 6014320c3e magit-module-confirm: Use refresh cache - - fef45b274e magit-insert-child-count: Minor performance tweak - - 4ec4d0272e magit-insert-section--finish: Optimize propertizing leaf sections - - 54d969b62f magit-insert-section--finish: Optimize for leaf sections - - 5544bac955 magit-insert-section--finish: Avoid unnecessary work for root section - - ~magit-turn-on-auto-revert-mode-if-desired~ performs cheaper checks first now. - [[https://github.com/magit/magit/issues/4591][#4591]] - - For performance reasons the "margin" style sadly had to be removed from - ~magit-blame-styles~. 608242086e - -- Added new commands ~git-commit-co-developed~ and ~git-commit-insert-trailer~ - (menu) [[https://github.com/magit/magit/issues/4810][#4810]], ~git-commit-search-message-backward~ and - ~git-commit-search-message-forward~ [[https://github.com/magit/magit/issues/4537][#4537]], ~git-rebase-update-ref~ [[https://github.com/magit/magit/issues/4776][#4776]], - ~magit-back-to-indentation~ [[https://github.com/magit/magit/issues/5183][#5183]], ~magit-git-mergetool~ [[https://github.com/magit/magit/issues/4128][#4128]], - ~magit-jump-to-ignored~ 550d99d86d, ~magit-log-related~ c33ed664e6, - ~magit-mouse-toggle-section~ 949b4a47a4, ~magit-profile-refresh-buffer~ - d520ce3306, ~magit-repolist-fetch~ [[https://github.com/magit/magit/issues/4453][#4453]], ~magit-repolist-find-file-other-frame~ - [[https://github.com/magit/magit/issues/4453][#4453]], ~magit-repolist-mark~ and ~magit-repolist-unmark~ [[https://github.com/magit/magit/issues/4453][#4453]], - ~magit-smerge-keep-all~ [[https://github.com/magit/magit/issues/4756][#4756]], ~magit-stage-buffer-file~ ebd7a0635d, - ~magit-stash-push~ (menu) [[https://github.com/magit/magit/issues/4583][#4583]], ~magit-toggle-git-debug~ 2ed5a06d08, - ~magit-unstage-buffer-file~ ebd7a0635d, ~magit-update-default-branch~ 59833692ed, - and others. - - - Added new transient menu ~magit-sparse-checkout~, which provides an interface - to the ~git sparse-checkout~ command, introduced in Git v2.25. [[https://github.com/magit/magit/issues/4102][#4102]] - - - Added new command ~magit-clone-sparse~, which makes it possible to clone - a repository and then immediately enable a sparse checkout, avoiding a - checkout of the full working tree. [[https://github.com/magit/magit/issues/4102][#4102]] - - - Added new command ~magit-stash-push~, which allows specifying a list of - files to be stashed. [[https://github.com/magit/magit/issues/4583][#4583]] - - - Added new command ~magit-ediff-resolve-all~, an alternative to - ~magit-ediff-resolve-rest~ (formerly known as ~magit-ediff-resolve~). The - new option ~magit-ediff-dwim-resolve-function~ controls which is used by - ~magit-ediff-dwim~ (another new command, ~magit-git-mergetool~, can also be - used). [[https://github.com/magit/magit/issues/4348][#4348]] - - - ~magit-refresh-buffer~ is now defined as a command. 26eac2bcb0 - -- Added new infix arguments: - - Added ~--diff-merges~ to ~magit-diff~ and ~magit-diff-refresh~. [[https://github.com/magit/magit/issues/4989][#4989]] - - Added ~--ff-only~ to ~magit-pull~. f766f68f78 - - Added ~--filter~ to ~magit-clone~ (hidden by default) to support partial - cloning, a feature that is available as of Git v2.17. [[https://github.com/magit/magit/issues/4102][#4102]] - - Added ~--force-rebase~ to ~magit-rebase~. 73b44644f6 - - Added ~--force~ to ~magit-fetch~ and ~magit-pull~. [[https://github.com/magit/magit/issues/5162][#5162]] - - Added ~--ignore-date~ to ~magit-rebase~. 7f03f572d5 - - Added ~--update-refs~ to ~magit-rebase~. 2fee806a01 - -- Added new hooks ~git-commit-post-finish-hook-timeout~ [[https://github.com/magit/magit/issues/4828][#4828]], - ~magit-post-clone-hook~ [[https://github.com/magit/magit/issues/4849][#4849]], ~magit-post-create-buffer-hook~ 26eec13943, and - ~magit-wash-message-hook~ 594bd14614. - -- Added new options ~git-commit-cd-to-toplevel~ [[https://github.com/magit/magit/issues/4973][#4973]], - ~magit-ediff-dwim-resolve-function~ 5a7519fd3d, ~magit-log-color-graph-limit~ - 545a64c3ee, ~magit-log-merged-commit-count~ [[https://github.com/magit/magit/issues/4711][#4711]], - ~magit-log-show-signatures-limit~ e32cec06a4, ~magit-openpgp-default-signing-key~ - 4eed9e1a45, ~magit-process-timestamp-format~ [[https://github.com/magit/magit/issues/4920][#4920]], - ~magit-revision-insert-related-refs-display-alist~ [[https://github.com/magit/magit/issues/4885][#4885]], - ~magit-section-show-context-menu-for-emacs<28~ 0168be9366, and - ~magit-verbose-messages~ 7fbf89cb52. - -- Added new faces ~git-rebase-action~ [[https://github.com/magit/magit/issues/4544][#4544]], ~magit-branch-warning~ bf3bcbe051, and - ~magit-section-child-count~ [[https://github.com/magit/magit/issues/4599][#4599]]; and added built-in faces ~diff-refine-added~ - and ~diff-refine-removed~ to the ~magit-faces~ custom group. - -- Added new function ~git-commit-turn-on-orglink~, intended for use in - ~git-commit-setup-hook~. d122f15edd - -- ~git-commit.el~ no longer depends on ~dash~. bb7b7a4020 - -- Some repository and submodule list columns got a bit fancier. - 3f3980735f 451438dc90 - -- Refreshing a repository or submodule list buffer now restores the previous - position. 1feda0cb1c - -- Added new variable ~magit-submodule-list-predicate~. ceab3124fb - -- ~magit-diff-dwim~ uses a more useful range when showing unpushed and unpulled - changes. 9413847c1a - -- When invoked with a prefix argument, ~magit-fetch-modules~ now acts as a - transient prefix command. fd5b9eadf3 - -- ~magit-cherry-branch~ now supports using a detached HEAD as source. ff3269814c - -- ~git-commit-save-message~ now reports whether the message was actually saved. - dfe3d03a14 - -- Make use of ~with-connection-local-variables~, and for older Emacsen use a - stripped down implementation. [[https://github.com/magit/magit/issues/4568][#4568]] - -- Added some forward compatibility for SHA-256. [[https://github.com/magit/magit/issues/4585][#4585]] - -- Added ~magit-mode-bury-buffer~ to ~magit-dispatch~. 5a2624985a - -- ~magit-tag-release~ learned to extract the version string from the HEAD commit's - message. 429d5c55e8 - -- Improved version display and sorting in repository list buffers. - 53199f2dd5, 68be0584f4 - -- Added support for marking repositories in repository list buffers and acting - on the marked repositories. [[https://github.com/magit/magit/issues/4453][#4453]] - -- Improved internals of the version/feature check caches. On the user visible - side, teach ~magit-zap-caches~ to zap everything, when invoked with a prefix - argument. [[https://github.com/magit/magit/issues/4603][#4603]] - -- When blaming, neighboring chunks about the same commit are now combined into - just one chunk. [[https://github.com/magit/magit/issues/4030][#4030]] - -- Taught ~magit-diff-dwim~ about commits of submodules shown in the status buffer - of the super-repository. [[https://github.com/magit/magit/issues/4151][#4151]] - -- A cherry pick or revert can now be continued when there are unstaged changes - as long as there are no unresolved conflicts, a behavior that more closely - matches the command-line behavior. [[https://github.com/magit/magit/issues/4615][#4615]] - -- ~magit-ediff-read-files~ now tries to detect renames in one-file logs. - b32521d543 - -- Increased use of section type, keymap and binding inheritance. - 70b34f08ab - -- Depend on the Compat package, allowing me to use convenient features that were - added to Emacs over the last few years, without having to wait another few - years, until everybody has updated to a reasonably recent Emacs release. - 571b4346c1 - -- Tag messages and signatures are now turned into sections in commit buffers. - 476383fc8f - -- Work has began on making internal circular dependencies between Magit - libraries a thing of the past. - -- The help text displayed in ~git-rebase-mode~ buffers got a makeover. - 670dad14b5 ff - -- Improved the diff to be shown while committing is determined. [[https://github.com/magit/magit/issues/3246][#3246]] - -- ~magit-reverse~ is now permitted in diff buffers between HEAD and - the working tree. e94b6ebfdb [[https://github.com/magit/magit/issues/5090][#5090]] - -- Registered a ~bookmark-handler-type~ for our handler. adf5848ea7 - -- No longer exit transient while toggling margin or cycling styles. bf0ef3826b - -- ~magit-clone-url-format~ can now be configured to an alist to support servers - that employ different URL schemes. [[https://github.com/magit/magit/issues/4738][#4738]] - -- Repositories hosted on Sourcehut can now be cloned by name. [[https://github.com/magit/magit/issues/4741][#4741]] - -- 564cff8a40 [[https://github.com/magit/magit/issues/4751][#4751]] magit-diff-wash-diffstat: Improve file rename identification -- ce0746ab9f [[https://github.com/magit/magit/issues/4743][#4743]] diff: Mention when a file is a binary -- 1c51352e6f [[https://github.com/magit/magit/issues/4785][#4785]] magit-branch-delete: Improve suggested branch for checkout -- 5d6c01e293 [[https://github.com/magit/magit/issues/4767][#4767]] magit-commit-squash-internal: Restore window conf after showing diff -- 74d14c2d10 magit-log-reflog-re: Handle "rewritten during rebase" -- 2653432bb5 [[https://github.com/magit/magit/issues/4776][#4776]] git-rebase: Support update-ref action -- 161ab48520 [[https://github.com/magit/magit/issues/4810][#4810]] git-commit: Add "Co-developed-by" header -- 99d9b3008a magit-long-lived-branches: New variable -- cd6fbe2887 [[https://github.com/magit/magit/issues/4837][#4837]] magit-branch-read-args: Read another name if chosen branch exists -- 410e4583e0 [[https://github.com/magit/magit/issues/4181][#4181]] Enable navigating broken sections -- b7daf6a2ff [[https://github.com/magit/magit/issues/4905][#4905]] magit-branch-delete: Improve "also on remote?" prompt -- dd2e870b13 [[https://github.com/magit/magit/issues/4823][#4823]] magit-save-repository-buffers: Wip commit all files at once -- b2c4a26b5b [[https://github.com/magit/magit/issues/4923][#4923]] magit-diff-show-or-scroll: Also handle tags -- 85d0554f4f [[https://github.com/magit/magit/issues/4920][#4920]] Optionally display process start time in margin of process buffers -- 2f3740ab68 [[https://github.com/magit/magit/issues/4786][#4786]] If bisect was invoked with --first-parent, use it for rest log too -- 25dbf32d86 [[https://github.com/magit/magit/issues/4781][#4781]] Perform checkouts asynchronously -- 152478b01f magit-branch-or-commit-at-point: Get from unpushed/unpulled sections -- e38500b590 git-commit-header-line-format: New variable -- 09f600fdcd..ebd7a0635d Improved commands for staging and unstaging files. -- 2c2b34d7ac [[https://github.com/magit/magit/issues/4966][#4966]] magit-file-{ignore,tracked}-p: Convert filename for git -- decd5f40dd [[https://github.com/magit/magit/issues/4970][#4970]] magit-stash-pop: Use pop instead of apply -- b3f7e24616 magit-map-sections: New function -- 667deaa74e magit-stage-file: Support staging ignored files -- d46270cb65 [[https://github.com/magit/magit/issues/4990][#4990]] git-commit-setup-font-lock: Set comment-end to the empty string -- 7d4092f00b Apply stash even if "git stash apply" cannot do it -- 186414ae41 [[https://github.com/magit/magit/issues/4998][#4998]] When inserting pseudo header, always prompt with a prefix argument -- ace5ca4401 [[https://github.com/magit/magit/issues/4999][#4999]] magit--imenu-goto-function: New function -- 27099441a0 [[https://github.com/magit/magit/issues/5000][#5000]] Offer textual range at point as next history element -- ae7f5e9fb4 magit-log-refresh: No longer exit transient after any margin command -- dd14e0c3c6 [[https://github.com/magit/magit/issues/5027][#5027]] git-commit: Ignore leading comment when inserting headers -- b436ad3830 git-commit: Replace the term "(pseudo) header" with "trailer" -- 72fbb3a579 magit-stash-read-message: Provide a default instead of magic -- 51f04d6826 [[https://github.com/magit/magit/issues/5042][#5042]] magit-branch-reset: Offer commit at point as history element -- fb1a3c487e [[https://github.com/magit/magit/issues/5051][#5051]] magit-sequencer-abort: Require confirmation -- 4efecc80a6 magit-log-move-to-revision: Default to fixup target if any -- 025c48ed68 magit-section-lineage: Optionally return objects instead of types -- 8a3674b427 completion: Prevent Vertico from sorting completion candidates -- 09961f67a4 [[https://github.com/magit/magit/issues/5097][#5097]] git-commit-turn-on-flyspell: Don't check below cut-line -- 0032ffca8d magit-branch: Add global variable suffixes by default -- 8a3c1ccdda magit-section-cycle: Pivot to tab-next if there is a binding conflict -- 28bcd29db5 [[https://github.com/magit/magit/issues/5107][#5107]] magit--shell-command: Use magit-with-editor -- f49584599c Hide placeholder commands from execute-completing-read -- e37c9ea4de Make discouraged use of git-commit-mode-hook safer and more convenient -- d98e935ed7 [[https://github.com/magit/magit/issues/5134][#5134]] magit-{browse,visit}-thing: Handle raw URL links -- 22fd8f8594 git-commit: Disable auto-filling for summary line -- f3b6864969 magit-insert-heading: Add optional CHILD-COUNT argument -- 6359e5c98f magit-hack-dir-local-variables: New function -- d1e2beb866 magit-file-checkout: Support selecting a directory -- 538cb2f90b [[https://github.com/magit/magit/issues/5176][#5176]] magit-file-section-indent: New variable -- 86509cb09e magit-run-git: Return exit-code -- 1fdb30cc1a [[https://github.com/magit/magit/issues/5188][#5188]] magit-log-select: Place cursor on first non-squash commit -- eb0b81e71d [[https://github.com/magit/magit/issues/5109][#5109]] Remove obsolete advice for Tramp - -** Fixes since v3.3.0 - -- ~magit-status-quick~ wasn't autoloaded. [[https://github.com/magit/magit/issues/4519][#4519]] - -- Magit's version could not be detected if it was installed using Straight. - [[https://github.com/magit/magit/issues/4526][#4526]] - -- Automatic saving of file-visiting buffers was broken inside remote - repositories that are accessed using Tramp. [[https://github.com/magit/magit/issues/4292][#4292]] - -- Worktree commands and listing worktrees in the status buffer were broken - inside remote repositories that are accessed using Tramp. [[https://github.com/magit/magit/issues/4326][#4326]] - -- Due to a regression in v3.3.0 setting the mark did not highlight the current - and only selected section until a second section is selected. 348d9b9861 - -- A diff header added in a new Git release wasn't handled yet. [[https://github.com/magit/magit/issues/4531][#4531]] - -- Fixed calculation of gravatar image size. ecfaa325a3 - -- ~magit-branch-checkout~ refreshed the buffer before all work was done. - a14f847d97 - -- Section highlighting was not always updated when it should have, and sometimes - it was done needlessly. aba0a59611, 41fcb24761, 10b5407131 - -- ~magit-dispatch~ contained a binding that conflicted with that of - ~transient-help~. f85c4efb52 - -- ~magit-diff-wash-submodule~ didn't account for empty commit messages. [[https://github.com/magit/magit/issues/4538][#4538]] - -- Empty face definitions weren't defined properly, resulting in "rogue" faces. - a66b86d511 - -- ~magit-remote-at-point~ could return invalid values on branch sections. - 2039619696 - -- Fixed a regression in ~magit-log-maybe-update-blob-buffer~. [[https://github.com/magit/magit/issues/4552][#4552]] - -- The helper function ~magit-current-blame-chunk~ passed the directory visited by - a Dired buffer to ~git blame~, leading to some commands (e.g., ~magit-checkout~) - erroring when called from a Dired buffer. [[https://github.com/magit/magit/issues/4560][#4560]] - -- ~magit-convert-filename-for-git~ needed yet another tweak on Windows. [[https://github.com/magit/magit/issues/4557][#4557]] - -- For Helm users, calling ~magit-stash-drop~ on the "Stashes" section has been - broken since v3.0.0. [[https://github.com/magit/magit/issues/4571][#4571]] - -- ~magit-list-refs~ failed to list a poorly named ~head~ branch. [[https://github.com/magit/magit/issues/4576][#4576]] - -- ~magit-rebase~ offered arguments that aren't supported by the Git version in - use. 5e70f10566 - -- ~magit-generate-changelog~ wasn't autoloaded. [[https://github.com/magit/magit/issues/4581][#4581]] - -- Failed to specify ~:test~ when calling ~cl-set-difference~ with strings. - d899f0e7a6 - -- ~magit-section-show-child-count~ broke on commits that have no children. [[https://github.com/magit/magit/issues/4598][#4598]] - -- ~magit-fetch-modules~ offered the ~--all~ argument, but that wasn't useful. - dc11ba7b29 - -- ~magit-discard~ didn't properly handle conflicts resulting from a file being - renamed on both sides. [[https://github.com/magit/magit/issues/4225][#4225]] - -- Since v3.0.0, ~magit-pull-from-pushremote~ has failed on non-fast-forward - merges. [[https://github.com/magit/magit/issues/4604][#4604]] - -- ~magit-insert-revision-message~ got tripped up by messages that begin with a - commit hash. [[https://github.com/magit/magit/issues/4602][#4602]] - -- ~git-commit.el~ didn't always use ~magit-git-executable~, instead hard coding - "git", even if Magit is available. 77255776cb - -- ~magit-global-core.notesRef~ and ~magit-global-core.displayRef~ didn't actually - handle global value. 0f96d39834 - -- ~magit-blame--make-highlight-overlay~ put the highlighting on the wrong line. - [[https://github.com/magit/magit/issues/4620][#4620]] - -- A regression from v3.2.0 broke visiting a file when that file has a mode - change and point is on the file or the mode change section. [[https://github.com/magit/magit/issues/4623][#4623]] - -- Module sections used the wrong keymap. 94aca04dc8 - -- In-progress cherry-picks were not always recognized. [[https://github.com/magit/magit/issues/4646][#4646]] - -- Locating remote executables was broken. 4d1d00e6fa - -- The use of external diff tools was not prevented everywhere we need the - ability to feed the output back to ~git apply~. [[https://github.com/magit/magit/issues/4664][#4664]] - -- The revision syntax for matching commit message was not supported. [[https://github.com/magit/magit/issues/4662][#4662]] - -- ~magit-current-blame-chunk~ errored at eob. 437dfe95e9 - -- ~magit-revision-refresh-buffer~ could set ~magit-buffer-revision-hash~ to - something that is not a hash. 2676dddb84 - -- ~magit-tag-release~ failed to create the first release. ea1d09e0a7 - -- 84922c3997 magit-show-commit: Fix handling of current buffer's file -- 71f7d1df1d magit-diff-wash-hunk: Handle one line edge case -- 1b0474b590 [[https://github.com/magit/magit/issues/4693][#4693]] Highlight trailing whitespace on lines using dos eol style -- 4b8eab3af1 [[https://github.com/magit/magit/issues/4697][#4697]] magit-{branch-or,}commit-at-point: Only use blame chunk when blaming -- 9b48dd7e36 [[https://github.com/magit/magit/issues/4702][#4702]] Prefer 'git log --no-walk' to 'git show --no-patch' -- 64cca91341 magit-push: Fix magit-push-implicitly--desc -- 5f5e065e1e magit-list-worktrees: Always include path in returned value -- c1def98185 magit--minibuf-default-add-commit: Fix position of commit -- c92dee94e9 magit-save-repository-buffers: Handle let-bound default-directory -- 9a69e3d479 [[https://github.com/magit/magit/issues/4765][#4765]] magit-blame--make-margin-overlays: Fix beginning of each overlay -- 557ab2c062 magit-diff-wash-diff: Fix headers for "git log -L --no-prefix" -- 8158b484ae magit-list-module-paths: Ensure they are relative to top-level -- 87e68e0a8e [[https://github.com/magit/magit/issues/4803][#4803]] magit-tag-release: Fix case when no default is detected -- a3d3758b26 [[https://github.com/magit/magit/issues/4807][#4807]] magit-file-rename: Fix initial-input for destination -- 2a5815fee1 [[https://github.com/magit/magit/issues/4806][#4806]] git-commit-font-lock-keywords-1: Use more restrictive keyword regexp - -- Commands that use optional third-party Git extensions didn't consider that - extension executables may be installed in Git's exec path instead of a - directory in ~exec-path~. [[https://github.com/magit/magit/issues/4812][#4812]] - -- ~magit-show-commit~ showed the incorrect commit when called on a chunk generated - by ~magit-blame-reverse~. [[https://github.com/magit/magit/issues/4834][#4834]] - -- 2286a63974 [[https://github.com/magit/magit/issues/3624][#3624]] Fix applying changes over Tramp from Windows -- fa0997797b magit-process-filter: Suppress bogus error when aborting emacsclient -- 76fe394953 magit-log-merged: Fix incorrect calculation of distance from tip -- 6d325d90ba Revert "git-commit-setup: Enable mode after setting local variables" -- 467bb21f7d magit-commit-diff-1: Take --allow-empty into account -- 97a95f7007 [[https://github.com/magit/magit/issues/4883][#4883]] magit-revision-fill-summary-line: Use revision buffer's window width -- 8586e49d81 [[https://github.com/magit/magit/issues/4891][#4891]] magit-auto-revert-mode: Leave disabled in one more case -- 5bd6c15089 magit-save-repository-buffers: Guard against disappeared repository -- dec25b407b [[https://github.com/magit/magit/issues/4898][#4898]] magit-log-set-commit-limit: Modify copy of magit-buffer-log-args -- 1d4bf64f33 [[https://github.com/magit/magit/issues/4903][#4903]] magit-insert-remote-branches: Fix Git 2.40 compatibility -- beb3d6cae2 [[https://github.com/magit/magit/issues/4787][#4787]] magit-wash-bisect-log: Ignore '# status:' lines -- dd649baf7c [[https://github.com/magit/magit/issues/4922][#4922]] diff: Fix visiting removed lines of renamed file -- 3224b1765f [[https://github.com/magit/magit/issues/4744][#4744]] Keep cursor from getting stuck in invisible text -- 9c66514b2c [[https://github.com/magit/magit/issues/4940][#4940]] magit-restore-window-configuration: Select buffer -- 031b9fad42 [[https://github.com/magit/magit/issues/4949][#4949]] magit-display-repository-buffer: Fix doing so -- a003d3c11c [[https://github.com/magit/magit/issues/4954][#4954]] magit-clone-internal: correctly get origin value from args -- 8b3acf7473 [[https://github.com/magit/magit/issues/4962][#4962]] Fix killing process if user input is aborted -- 4ca7b95f28 magit-diff-type: Fix in logs when section isn't provided as argument -- 93d30c5459 [[https://github.com/magit/magit/issues/4976][#4976]] magit-cygwin-mount-points: Don't use cygwin hack remotely -- 027bae37ae [[https://github.com/magit/magit/issues/4988][#4988]] git-commit-setup: Fix auto-mode-alist for remote files -- 889ed3111a [[https://github.com/magit/magit/issues/4977][#4977]] Allow un-/staging binary files when whitespace is being ignored -- 7a1d503470 [[https://github.com/magit/magit/issues/5005][#5005]] git-commit-insert-header: Fix determining location -- 18d1b13675 [[https://github.com/magit/magit/issues/5006][#5006]] magit-process-finish: Avoid unnecessary magit-process-buffer call -- 3329bf0f4f magit-list-refs: Exclude all symbolic references -- 139f603cb8 [[https://github.com/magit/magit/issues/5021][#5021]] magit-hunk-section-map: Honor smerge-command-prefix again -- c6a62accc5 [[https://github.com/magit/magit/issues/5029][#5029]] magit-jump-*-pushremote: Restore functionality - -- If applying a patch series with ~git am~ failed, the status buffer incorrectly - repeated already applied patches in the list of remaining patches. [[https://github.com/magit/magit/issues/5024][#5024]] - -- b187753717 magit-insert-section-body: Ensure parent sections get extended - -- ~magit-bisect-run~ is supposed to abort if there are uncommitted - changes or if the revisions are flipped (like ~magit-bisect-start~ - does), but these checks were unintentionally dropped in Magit - v3.1.0. [[https://github.com/magit/magit/issues/5070][#5070]] - -- debb9723d9 Support staging hunks over Tramp again -- c3b7fd7dc4 [[https://github.com/magit/magit/issues/5076][#5076]] magit-status-setup-buffer: Ensure correct position when narrowed -- 8fd3cce75c magit-completing-read: Support using function as COLLECTION -- fc485bae0d [[https://github.com/magit/magit/issues/5092][#5092]] magit-insert-remote-branches: Skip HEAD if not symref -- 36be3d66ed [[https://github.com/magit/magit/issues/5102][#5102]] magit-tag-release: Use magit-run-git-with-editor -- 65ecb9c5fc Only hook up git-commit-setup-font-lock-in-buffer once mode is enabled -- 0e8f25a8d8 [[https://github.com/magit/magit/issues/5094][#5094]] elpa/elpa/magit magit--git-wash: Support commands whose non-zero status isn't an error -- faa308fccd [[https://github.com/magit/magit/issues/5122][#5122]] magit-module-confirm: Never require confirmation with prefix argument -- ea02c8e634 magit-log-buffer-file: Support using the region in blobs again -- ea0f07e549 [[https://github.com/magit/magit/issues/5158][#5158]] magit-section--enable-long-lines-shortcuts: Fix warning -- 9d4192b7b1 [[https://github.com/magit/magit/issues/5116][#5116]] Fix visiting file from buffer created with magit-diff-paths -- ad68015aa1 [[https://github.com/magit/magit/issues/5178][#5178]] magit-confirm: Directly support two rounds of prompt formatting -- f31cf79b27 [[https://github.com/magit/magit/issues/5175][#5175]] magit-parse-git-async: Discard stderr for now - -* Authors - - 899 Jonas Bernoulli - 78 Kyle Meyer - 7 Nacho Barrientos - 5 Basil L. Contovounesios - 4 Andrey Smirnov - 4 Damien Cassou - 4 Park Zhou - 4 Phil Sainty - 4 Stefan Kangas - 3 Daniel Mendler - 2 Aaron L. Zeng - 2 Alex Kreisher - 2 Ben North - 2 Brennan Vincent - 2 Martin Joerg - 2 Nicholas Vollmer - 2 ziggy - 1 Adam Jones - 1 Adam Porter - 1 Allen Li - 1 Andrew Zipperer - 1 Angel de Vicente - 1 Arialdo Martini - 1 Bastian Beranek - 1 Ben Zanin - 1 Brian Leung - 1 Cameron Chaparro - 1 Christian Tietze - 1 Christopher Carlile - 1 Daanturo - 1 Dan Kessler - 1 Daniel Martín - 1 Ellis Kenyo - 1 Eugene Mikhaylov - 1 Eyal Soha - 1 Frédéric Giquel - 1 Greg Steuck - 1 Géza Herman - 1 JD Smith - 1 Jean-Louis Giordano - 1 Jeremy Sowden - 1 Johannes Maier - 1 Jorge Israel Peña - 1 Li Chen - 1 Lin Sun - 1 Lénaïc Huard - 1 Magnar Sveen - 1 Markus Beppler - 1 Matt Beshara - 1 Ola Nilsson - 1 Paul Pogonyshev - 1 Philipp Stephani - 1 Pieter van Oostrum - 1 Pratyush Yadav - 1 Rahul Rameshbabu - 1 Robert Irelan - 1 Roland Marchand - 1 Ron Parker - 1 Sean Allred - 1 Sean Farley - 1 Sean Whitton - 1 Shuguang Sun - 1 StrawberryTea - 1 Ulrich Müller - 1 Vladimir Ivanov - 1 Waqar Hameed - 1 dependabot[bot] - 1 hokomo - 1 shoefone -- cgit v1.2.3